Fluval Flex 9 Gallon Glass Aquarium Kit Instruction Manual

1. Introdución

This manual provides detailed instructions for the setup, operation, and maintenance of your Fluval Flex 9 Gallon Glass Aquarium Kit. The Fluval Flex aquarium is designed for freshwater use, featuring a contemporary design with a curved front, adjustable LED lighting, and a powerful 3-stage filtration system. Please read this manual thoroughly before beginning setup to ensure proper installation and safe operation.

Image 1.1: The Fluval Flex 9 Gallon Glass Aquarium Kit, showcasing its curved front and integrated lighting.

2. Información de seguridade

Always observe basic safety precautions to reduce the risk of fire, electric shock, or injury to persons. This includes:

• Ensure the aquarium is placed on a sturdy, level surface capable of supporting its full weight when filled with water.
• Non fagas funcionar ningún electrodoméstico se ten o cable ou a clavija danados, se funciona mal ou se se deixou caer ou se danou de calquera xeito.
• To avoid the possibility of the appliance plug or receptacle getting wet, position the aquarium to one side of a wall-mounted receptacle to prevent water from dripping onto the receptacle or plug.
• A 'drip loop' should be arranged for each cord connecting an aquarium appliance to a receptacle. The drip loop is the part of the cord below the level of the receptacle, or the connector if an extension cord is used, to prevent water from traveling along the cord and coming into contact with the receptacle.
• Never pull the cord to unplug from the outlet. Grasp the plug and pull to disconnect.
• Desenchufe sempre un electrodoméstico da toma de corrente cando non estea en uso, antes de poñer ou quitar pezas e antes de limpalo.
• Este aparello está pensado só para uso doméstico.

3. Contido do paquete

Verify that all components are present and in good condition before proceeding with setup:

• Fluval Flex 9 Gallon Glass Aquarium with integrated hood and LED lighting system
• FLEXPad Remote Control for LED lighting
• Bomba de circulación
• Foam Filter Block (Mechanical Filtration)
• Activated Carbon Insert (Chemical Filtration)
• BIOMAX Insert (Biological Filtration)
• Adaptador de alimentación

Image 3.1: Packaging of the Fluval Flex Freshwater Kit, highlighting key features and included components.

4. Configuración

Follow these steps for the initial setup of your Fluval Flex aquarium:

1. Colocación: Choose a suitable location for your aquarium. Ensure the surface is strong enough to support the weight of the filled aquarium (approximately 90 lbs for 9 gallons of water plus substrate and decorations). The location should be away from direct sunlight, heat sources, and drafts.
2. Aclarado: Rinse the aquarium glass, filter media, and any decorations thoroughly with clean water. Do not use soap or detergents.
3. Filter Media Installation: Install the provided filter media into the rear filter compartment. The typical order is: Foam (mechanical) first, followed by Activated Carbon (chemical), and then BIOMAX (biological). Refer to the diagram below for correct placement.
4. Instalación da bomba: Place the circulation pump into its designated section within the rear filter compartment. Ensure the multi-directional dual outputs are correctly attached and positioned.
5. Substrate and Decorations: Add your chosen substrate (gravel, sand) and decorations.
6. Filling the Aquarium: Carefully fill the aquarium with dechlorinated water. Leave a small gap from the top edge to prevent overflow.
7. Conexión de alimentación: Connect the power adapter to the LED lighting system and the circulation pump. Ensure a drip loop is formed for all electrical cords. Plug the power adapter into a suitable electrical outlet.
8. Operación inicial: The pump and lights should now be operational. Allow the filtration system to run for at least 24-48 hours before introducing any aquatic life to allow the water to stabilize.

Imaxe 4.1: Diagrama que ilustra os 3-stage filtration system with mechanical foam, chemical carbon, and biological BIOMAX media.

5. Instrucións de funcionamento

Sistema de iluminación LED 5.1

The Fluval Flex features a fully adjustable 7500K LED lamp with White + RGB LEDs, controlled by the included FLEXPad remote. This system supports plant growth and allows for a wide range of color blends and special effects.

• Encendido/apagado: Use the designated power button on the FLEXPad remote to turn the lights on or off.
• Axuste de cor: The remote allows you to select from over 80 colors and adjust the intensity of White, Red, Green, and Blue LEDs to create custom hues.
• Efectos especiais: Access pre-programmed effects such as fading cloud cover, lightning bolts, and full color cycle via the remote.
• Adormecer: Adjust the brightness of the lights using the dimming controls on the remote.

Image 5.1: The FLEXPad remote control, demonstrating its various color and effect options for the LED lighting.

5.2 Sistema de filtración

Os 3-s integradostage filtration system continuously works to maintain water quality. The circulation pump ensures water passes through the mechanical, chemical, and biological media.

• Caudal de auga: The multi-directional dual outputs can be adjusted to customize water flow within the aquarium, ensuring proper circulation and oxygenation.
• Compartimento oculto: The rear filter compartment is designed to conceal the filtration components and water line, contributing to the aquarium's clean aesthetic.

Imaxe 5.2: Acabadoview of additional features including multi-directional dual outputs, infrared remote sensor, bold curved design, honeycomb wrap, and easy feed opening.

6. Mantemento

Regular maintenance is crucial for a healthy aquatic environment.

• Cambios de auga: Perform partial water changes (25-30%) weekly or bi-weekly, depending on your aquarium's inhabitants and bioload. Always use dechlorinated water.
• Filter Media Cleaning/Replacement:
  • Foam Filter Block: Rinse the foam block in old aquarium water during water changes to remove trapped debris. Replace every 2-4 weeks or when visibly degraded.
  • Activated Carbon Insert: Replace activated carbon every 2-4 weeks. Carbon absorbs impurities and medications but becomes saturated over time.
  • BIOMAX Insert: Rinse BIOMAX media gently in old aquarium water only when necessary to remove excessive sludge. Do not replace biological media unless it is severely degraded, as it houses beneficial bacteria.
• Aquarium Cleaning: Clean the interior glass surfaces regularly to remove algae buildup. The easy feed top cover opening facilitates access for feeding and minor cleaning tasks.
• Mantemento da bomba: Periodically check the circulation pump for blockages and clean the impeller if necessary to ensure optimal water flow.

7 Solución de problemas

This section addresses common issues you might encounter with your Fluval Flex aquarium.

• No Power to Lights or Pump:
  • Check if the power adapter is securely plugged into both the aquarium and the wall outlet.
  • Verifique que a toma de corrente funciona conectando outro electrodoméstico.
  • Ensure the FLEXPad remote has working batteries and is pointed at the infrared remote sensor on the canopy.
• Auga turbia:
  • Síndrome de New Tank: Common in new setups. Allow the biological filter to establish (cycling process). Avoid overfeeding.
  • Sobrealimentación: Reducir a cantidade de comida.
  • Insufficient Filtration: Check if filter media is clogged and clean/replace as needed. Ensure the pump is operating correctly.
• Reduced Water Flow from Pump:
  • Check for blockages in the pump intake or impeller. Disassemble and clean the pump.
  • Ensure filter media is not excessively clogged.
• O control remoto non responde:
  • Replace the batteries in the FLEXPad remote.
  • Ensure there are no obstructions between the remote and the infrared sensor on the aquarium canopy.

8. Especificacións

Image 8.1: Dimensional diagram of the Fluval Flex 9 Gallon Aquarium.

Image 8.2: Comparison table for Fluval Flex 9 and Flex 15 models, detailing specifications like capacity, wattage, e dimensións.

9. Garantía e soporte

This Fluval Flex Aquarium Kit is covered by a Manufacturer Warranty. For specific details regarding warranty coverage, duration, and claims, please refer to the documentation included with your product or contact Fluval customer support directly.

For technical assistance, replacement parts, or further inquiries, please visit the official Fluval websitio web ou póñase en contacto co seu departamento de atención ao cliente. A información de contacto adoita atoparse na embalaxe do produto ou na ficha do fabricante. websitio.