Manual do usuario da estación de acoplamento dual Ewent EW7014 USB 3.1 Gen-1

1. Introdución

The Ewent EW7014 USB 3.1 Gen-1 Dual Docking Station provides a convenient solution for connecting and accessing 2.5-inch and 3.5-inch SATA hard drives or Solid State Drives (SSDs). This device supports high-speed data transfer via USB 3.1 Gen-1 and features a standalone cloning function, allowing you to duplicate drives without a computer connection.

1.1. Produto rematadoview

Image 1.1: Ewent EW7014 Dual Docking Station with two hard drives.

1.2. Contido do paquete

• Ewent EW7014 Dual Docking Station
• USB 3.1 Gen-1 Cable
• Adaptador de alimentación

Image 1.2: Contents of the Ewent EW7014 package.

2. Características clave

• Dual Bay Design: Supports two 2.5-inch or 3.5-inch SATA I/II/III HDDs/SSDs simultaneously, up to 12.5 mm thickness.
• USB 3.1 Gen-1 Connectivity: Offers Super Speed data transfer rates up to 5 Gbps (backward compatible with USB 2.0).
• Standalone Cloning Function: Duplicate hard drives without requiring a computer connection.
• Indicadores LED: Provides status LEDs for power, data activity, and cloning progress.
• Plug and Play: Non se require instalación de controladores para a maioría dos sistemas operativos.

Image 2.1: Visual representation of the docking station's backup and cloning capabilities.

3. Instrucións de configuración

3.1. Conectando a estación de acoplamento

1. Connect the provided power adapter to the 'Power' input port on the rear of the docking station. Plug the other end into a power outlet.
2. Connect one end of the supplied USB 3.1 Gen-1 cable to the 'USB 3.1' port on the rear of the docking station.
3. Conecte o outro extremo do cable USB a un porto USB dispoñible no seu ordenador.
4. Ensure the 'ON/OFF' switch on the rear of the docking station is in the 'OFF' position before inserting drives.

Image 3.1: Rear panel connections of the docking station.

3.2. Inserting Hard Drives / SSDs

1. Gently slide your 2.5-inch or 3.5-inch SATA HDD/SSD into an available drive bay (HDD1 or HDD2) until it is firmly seated. Ensure the SATA connector on the drive aligns with the connector in the bay.
2. If using 2.5-inch drives, ensure they are securely placed within the bay.
3. Once drives are inserted, switch the 'ON/OFF' button to the 'ON' position. The power LED will illuminate.

4. Instrucións de funcionamento

4.1. Data Transfer Mode (PC Connection)

When connected to a computer via USB, the docking station functions as an external drive enclosure. Inserted drives will appear as removable storage devices in your operating system.

1. Ensure the docking station is powered on and connected to your computer.
2. Insert your SATA HDD/SSD into either drive bay.
3. Your operating system should automatically detect the drive(s). You can then access, copy, or move filecomo farías con calquera outro dispositivo de almacenamento externo.
4. The data activity LEDs (HDD1, HDD2) will flash during read/write operations.
5. Always safely eject the drives from your operating system before powering off the docking station or removing the drives.

4.2. Standalone Cloning Function

The cloning function allows you to duplicate the contents of a source drive to a target drive without a computer connection. The target drive must be equal to or larger in capacity than the source drive.

Image 4.1: Top panel with drive bays and LED indicators for cloning progress.

Warning: All data on the target drive will be erased during the cloning process. Ensure you have backed up any important data from the target drive before proceeding.

1. Ensure the docking station is powered off and disconnected from your computer.
2. Insira o unidade de orixe (the drive you want to copy FROM) into the HDD 1 baía.
3. Insira o unidade de destino (the drive you want to copy TO) into the HDD 2 baía.
4. Power on the docking station using the 'ON/OFF' switch.
5. Press and hold the 'Clone' button (usually located near the drive bays) for approximately 3-5 seconds until the cloning progress LEDs (25%, 50%, 75%, 100%) begin to flash.
6. Release the 'Clone' button. The cloning process will begin. The progress LEDs will illuminate sequentially to indicate the completion percentage.
7. Unha vez que todos os LED de progreso estean acesos de forma fixa, o proceso de clonación rematou.
8. Power off the docking station and safely remove both drives.

5. Especificacións técnicas

6 Solución de problemas

6.1. Drive Not Detected by Computer

• Asegúrate de que a estación de acoplamento estea acendida e que o adaptador de corrente estea conectado correctamente.
• Verify the USB cable is firmly connected to both the docking station and your computer. Try a different USB port on your computer.
• Check if the hard drive/SSD is properly seated in the bay. Remove and re-insert it.
• If it's a new drive, it might need to be initialized, partitioned, and formatted in your operating system's Disk Management (Windows) or Disk Utility (macOS).
• Test with a different known-good hard drive/SSD to rule out a drive issue.

6.2. Cloning Process Does Not Start

• Ensure the docking station is disconnected from the computer before initiating cloning.
• Verify that the source drive is in HDD1 and the target drive is in HDD2.
• Confirme que a capacidade da unidade de destino sexa igual ou superior á capacidade da unidade de orixe.
• Press and hold the 'Clone' button for the required duration (3-5 seconds) until the progress LEDs start flashing.
• Ensure both drives are properly inserted and detected by the docking station (power on, then check if drive LEDs briefly illuminate).

6.3. Velocidades lentas de transferencia de datos

• Ensure you are connected to a USB 3.1 Gen-1 (USB 3.0) port on your computer. Connecting to a USB 2.0 port will result in slower speeds.
• Verify that your computer's USB 3.1 Gen-1 drivers are up to date.
• The actual transfer speed can be limited by the speed of the hard drive/SSD itself.
• Evitar a transferencia de moitos pequenos filesimultaneamente, xa que isto pode reducir a velocidade de transferencia xeral.

7. Mantemento

• Keep the docking station clean by wiping it with a soft, dry cloth. Avoid using liquid cleaners or solvents.
• Ensure the device is kept in a dry environment, away from direct sunlight and extreme temperatures.
• Do not block the ventilation openings (if any) to prevent overheating.
• Handle hard drives and SSDs with care when inserting or removing them to prevent damage to the connectors.

8. Información sobre garantía e soporte

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Ewent websitio. Garda o comprobante de compra para reclamacións de garantía.

Ewent is committed to providing reliable products and customer assistance. If you encounter issues not covered in this manual, please contact Ewent customer support for further assistance.