1. Introdución
The ADJ DB Display MKII is a rack-mountable decibel level display unit designed to provide a visual representation of audio signal levels within an amplifier rack or other audio setup. This device enhances the visual appeal of your audio system by displaying sound levels through a series of LED indicators that progress from green, through amber, to red, indicating increasing signal intensity. It is equipped with features for precise control and versatile connectivity, making it suitable for various professional audio environments.
Image 1.1: Front panel of the DB Display MKII, illustrating the dual-channel LED display and power switch.
2. Características
- Deseño de montaxe en bastidor: Specifically engineered for installation in standard 19-inch ampbastidores lificadores.
- Pantalla LED dinámica: Features a dual-channel (Left & Right) LED display that visually indicates decibel levels, transitioning from green (low), to amber (medium), to red (high).
- Sensibilidade axustable: Independent sensitivity adjustments for both left and right channels allow for precise calibration to match various audio sources and desired display responsiveness.
- Dous modos de visualización: Users can select between 'Dot' mode (single illuminated LED per level) and 'Bar' mode (cumulative illuminated LEDs up to the current level).
- Conectividade versátil: Equipped with both RCA and XLR line inputs and outputs for broad compatibility with professional audio equipment.
- Compact Power Supply: Operates with an included 5V DC, 500mA power supply.
3. Configuración
Follow these steps to properly set up your DB Display MKII unit:
- Montaxe: Secure the DB Display MKII into a standard 19-inch equipment rack using appropriate rack screws. Ensure adequate ventilation around the unit.
- Conexión de alimentación: Connect the included 5V DC power supply to the 'DC INPUT' jack on the rear of the unit. Plug the power supply into a suitable electrical outlet.
- Conexión de entrada de audio: Connect your audio source (e.g., DJ mixer, audio interface) to the 'LINE INPUTS' on the rear panel. You can use either the Left & Right RCA inputs or the Left & Right XLR inputs. Ensure connections are secure for both channels.
- Audio Output Connection (Optional): If you need to pass the audio signal through the DB Display MKII to another device (e.g., amplifier, recording device), connect the 'LINE OUTPUTS' (RCA or XLR) to the input of the next device in your audio chain.
Image 3.1: Rear panel connections, including RCA and XLR inputs/outputs.
Imaxe 3.2: Detallada view of the DC power input and XLR connections on the rear.
4. Instrucións de funcionamento
Once the unit is set up, follow these instructions for operation:
- Encendido: Flip the 'POWER' switch on the front panel to the 'ON' position. The LED display should illuminate.
- Seleccionar o modo de visualización: Use the 'MODE' switch on the front panel to toggle between 'DOT' and 'BAR' display modes.
- Modo de puntos: A single LED illuminates at the current decibel level for each channel.
- Bar Mode: All LEDs up to the current decibel level illuminate for each channel, creating a bar graph effect.
- Axustar a sensibilidade: Play audio through your system. Use the 'SENSITIVITY' adjustment knobs (typically small potentiometers accessible via a screwdriver) for the Left and Right channels to calibrate the display. Adjust them so that the LEDs accurately reflect your desired audio levels, with peaks reaching into the amber or occasional red zone without consistently staying in the red.
- Monitor Audio Levels: Observe the LED display to visually monitor your audio signal levels. Green indicates safe levels, amber suggests strong but acceptable levels, and red indicates peak levels that may lead to clipping or distortion if sustained.
Image 4.1: Front panel controls, including power, sensitivity, and display mode selection.
Image 4.2: The DB Display MKII with LEDs illuminated, showing active audio levels.
5. Mantemento
To ensure the longevity and optimal performance of your DB Display MKII, follow these maintenance guidelines:
- Limpeza: Regularly wipe the unit with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents, which can damage the finish or internal components.
- Ventilación: Ensure that the unit's ventilation openings are not obstructed, especially when rack-mounted. Proper airflow prevents overheating.
- Xestión de cables Keep audio and power cables neatly organized and free from kinks or excessive tension to prevent damage.
- Almacenamento: If storing the unit for an extended period, disconnect it from power and audio sources, and store it in a cool, dry place away from direct sunlight and extreme temperatures.
6 Solución de problemas
If you encounter issues with your DB Display MKII, refer to the following common problems and solutions:
| Problema | Causa posible | Solución |
|---|---|---|
| No LEDs illuminate | Unit not powered on; power supply issue; no audio input. | Check power switch and connection. Verify power supply is functional. Ensure audio source is playing and connected correctly. |
| LEDs are too dim or too bright | Sensitivity settings incorrect. | Adjust the 'SENSITIVITY' knobs on the front panel for each channel until the display is responsive and accurate. |
| Only one channel displays levels | Audio input cable for one channel is disconnected or faulty; sensitivity for one channel is too low. | Check audio input cables for the non-working channel. Increase sensitivity for that channel. Test with a different audio source. |
| Display is erratic or inconsistent | Poor audio signal quality; loose connections. | Ensure audio cables are securely connected. Check the audio source for stable output. |
7. Especificacións
- Modelo: DB Display MKII
- Marca: Produtos ADJ
- Peso do artigo: 2.75 libras (1.25 quilogramos)
- Dimensións do produto (LxWxH): 19" x 1.75" x 1.75" (483 mm x 44.5 mm x 44.5 mm)
- Número de canles: 2 (Stereo Left/Right)
- Tecnoloxía de conectividade: RCA, XLR
- Entradas de liña: Left & Right RCA / Left & Right XLR
- Saídas de liña: Left & Right RCA / Left & Right XLR
- Fonte de enerxía: Alimentación de corrente continua
- Voltage Operación: DC 5V, 500mA (Power Supply included)
- ASIN: B01NAVT59W
8. Garantía e soporte
For warranty information and technical support regarding your ADJ DB Display MKII, please refer to the documentation included with your purchase or visit the official ADJ Products website. You may also contact ADJ customer service directly for assistance with product operation, troubleshooting, or service inquiries.
ADJ Products Official Websitio: www.adj.com
