Lithonia Lighting WF6 LED 30K MW M6 Recessed Wafer Downlight Instruction Manual

1. Produto rematadoview

The Lithonia Lighting Wafer-Thin LED recessed downlight with remote driver box offers high-quality light output and efficiency. Its innovative wafer-slim, Type IC design allows for easy installation in new construction or remodel projects from below the ceiling, eliminating the need for a traditional pot light housing.

This downlight is designed for versatility and can be installed in various indoor and outdoor residential, hospitality, commercial, and multifamily applications.

Figure 1: Lithonia Lighting WF6 LED Recessed Wafer Downlight

2. Información de seguridade

AVISO: Always turn off power at the main circuit breaker before beginning any electrical installation or maintenance. Failure to do so may result in serious injury or death.

• Use o equipo de protección individual axeitado, incluídas lentes de seguridade, durante a instalación.
• Asegúrese de que todas as conexións eléctricas estean seguras e cumpran cos códigos eléctricos locais.
• This product is rated for 120V input voltage. Verify your power supply matches this requirement.
• The fixture is IC Rated, Wet Listed, and Air Tight, making it safe for contact with insulation and suitable for damp ou lugares húmidos.

3. Contido do paquete

Verifica que todos os compoñentes estean incluídos no teu paquete:

• LED Module (Downlight Fixture)
• Caixa de controladores remotos
• Folla de instrucións de instalación
• Hole Template (for new ceiling cutouts)
• Wago Connectors (for electrical connections)

Figure 2: Remote Driver Box and LED Module

4. Guía de instalación

This downlight requires only 2 inches of ceiling clearance for installation.

4.1. Prepare the Ceiling Hole

1. Medir e marcar: Double-check and measure the existing ceiling hole. If a new hole is required, use the provided hole template or a drill saw with the appropriate diameter (5.9 inches for the back hole size) to mark the center and cut the opening. Ensure the hole size allows the luminaire's outside trim to cover it while the spring clips secure the fixture.
2. Pull Wiring: Pull the electrical wire through the cut-out hole and cut to the needed length.

Figure 3: Ceiling Hole Preparation and Wiring

4.2. Connect the Remote Driver Box

3. Open Driver Box: Abra a tapa da caixa do controlador remoto e retire unha das perforacións da placa lateral.
4. Conexións de cable: Locate the power supply leads from the remote driver box. Connect the black wire to the live wire, the white wire to the neutral wire, and the green wire to the ground wire using the provided Wago connectors. Ensure all connections are made securely inside the driver box.
5. Close Driver Box: Close the cover of the driver box.
6. Position Driver Box: Place the remote driver box through the cut-out hole and lay it on the ceiling above the drywall.

4.3. Install the LED Module

7. Módulo de conexión: Connect the LED module to the remote driver box and tighten the nut connector.
8. Inserir módulo: Pull the spring clips on the fixture up and through the ceiling hole. Place the module into the hole, ensuring the spring clips hold securely to the ceiling.

4.4. Pasos finais

9. Restaurar enerxía: Turn on the electricity at the circuit breaker box.
10. Verificar o funcionamento: Turn the power in the room back on and ensure the LED module illuminates.

4.5. Vídeo de instalación

Video 1: Step-by-step installation guide for the Lithonia Lighting Ultra-Thin Wafer Downlight. This video demonstrates the process of cutting the ceiling hole, wiring the remote driver box, and securing the LED module.

5. Instrucións de funcionamento

The Lithonia Lighting WF6 LED Downlight is designed for simple operation.

• Encendido/apagado: Controla a luz cun interruptor de parede estándar conectado ao circuíto.
• Función regulable: This downlight is dimmable. For optimal performance, use with compatible LED dimmers. A list of compatible dimmers can be found on the product's spec sheet.
• Temperatura de cor: This specific model (WF6 LED 30K MW M6) provides a 3000K (Bright White) color temperature. Other models in the series may offer selectable color temperatures.

Figura 4: Example of different color temperatures in a room setting. This model provides 3000K.

6. Mantemento

The Lithonia Lighting WF6 LED Downlight requires minimal maintenance.

• Limpeza: Ensure power is off before cleaning. Use a soft, dry cloth to wipe the surface of the fixture. Avoid abrasive cleaners or solvents that may damage the finish.
• Duración da vida do LED: The integrated LED has an average life of 36,000 hours, which translates to over 16 years when used 6 hours per day. No bulb replacement is necessary.

7 Solución de problemas

If you encounter issues with your downlight, refer to the following common troubleshooting steps:

• A luz non se acende:
  • Comprobe o disxuntor para asegurarse de que o aparello recibe corrente.
  • Verify all electrical connections in the remote driver box are secure.
  • Ensure the connection between the LED module and the driver box is tight.
• Problemas de parpadeo ou atenuación:
  • Ensure you are using an LED-compatible dimmer switch. Incompatible dimmers can cause flickering or improper dimming.
  • Comprobe as conexións de cableado soltas.
• Fixture Not Sitting Flush:
  • Verify the ceiling hole diameter is correct (5.9 inches for the back hole). A hole that is too large may prevent the spring clips from holding securely.
  • Ensure the spring clips are fully engaged and holding the fixture firmly against the ceiling.

8. Especificacións

Figura 5: Dimensións do produto

Figura 6: Certificacións de produtos

9. Garantía e soporte

Garantía: This Lithonia Lighting product comes with a 5-year limited warranty.

For further assistance, technical support, or warranty claims, please contact Lithonia Lighting customer service or visit their official website. Refer to the product packaging or the official Lithonia Lighting websitio para obter a información de contacto máis actualizada.