Xanlite APS300 Solar LED Wall Light with Motion Detector

1. Produto rematadoview

The Xanlite APS300 is a solar-powered LED wall light designed for outdoor use. It features an integrated motion detector and a dusk-to-dawn sensor, providing automatic illumination when movement is detected in low-light conditions. This light is energy-efficient, utilizing solar energy for charging, and boasts an IP44 rating for weather resistance.

• Alimentación solar: Charges during the day using sunlight, eliminating the need for electrical wiring.
• Sensor de movemento: Automatically activates the light when motion is detected.
• Sensor de solpor a amencer: Ensures the light only operates when ambient light is low.
• Resistencia ás inclemencias do tempo IP44: Protected against solid objects larger than 1mm and splashing water from any direction.
• Saída de luz: Provides 300 lumens of cool white light (6000K).

Imaxe 1.1: Fronte view of the Xanlite APS300 Solar LED Wall Light, showing the LED array and motion sensor.

2. Instrucións de seguridade

Please read and understand all safety instructions before installing or using the product. Keep this manual for future reference.

• Do not immerse the solar product in water.
• Ensure the solar panel is clean and unobstructed for optimal charging. Clean with a damp pano se é necesario.
• Do not attempt to open or modify the product. There are no user-serviceable parts inside.
• Manteña o produto lonxe de chamas abertas ou fontes de calor extremas.
• Desfágase do produto e da súa batería de forma responsable segundo a normativa local.

3. Contido do paquete

Verifica que todos os compoñentes estean presentes no paquete:

• 1 x Xanlite APS300 Solar LED Wall Light
• Ferraxes de montaxe (parafusos, tacos) - (Typically included, though not explicitly listed as separate item in source data)
• Manual de usuario

4. Configuración e instalación

Follow these steps for proper installation of your solar LED wall light:

1. Choose an Optimal Location: Select a mounting location that receives direct sunlight for at least 6-8 hours daily. This ensures the solar panel can fully charge the internal battery. Avoid areas under eaves, trees, or other obstructions that might block sunlight.
2. Preparación para a montaxe: The light is designed for wall mounting. You will need to drill three holes for the mounting plate. Use a pencil to mark the desired positions on the wall.
3. Perforación: Using an appropriate drill bit for your wall material, drill the marked holes. Insert wall plugs if necessary.
4. Coloque a placa de montaxe: Fixe a placa de montaxe á parede cos parafusos proporcionados.
5. Montar a luz: Slide the Xanlite APS300 light onto the secured mounting plate until it clicks into place. Ensure it is firmly attached.
6. Activa a luz: Locate the ON/OFF switch, usually on the back or bottom of the unit. Ensure it is set to the "ON" position. The battery will not charge if the switch is in the "OFF" position.

Image 4.1: Illustration of the solar light charging during the day and automatically illuminating at night.

5. Instrucións de funcionamento

The Xanlite APS300 operates automatically once installed and activated:

• Carga automática: During daylight hours, the integrated solar panel converts sunlight into electricity, charging the internal rechargeable battery.
• Operación do anoitecer ao amencer: The light features a built-in light sensor (crépusculaire detector) that detects ambient light levels. It will automatically enter standby mode at dusk when light levels are low.
• Detección de movemento: While in standby mode at night, the motion sensor will detect movement within its range. Upon detection, the light will illuminate at full brightness (300 lumens) for approximately 25 seconds before returning to standby mode if no further motion is detected.

Nota importante:

• Ensure the ON/OFF switch is always in the "ON" position for the light to charge and operate.
• The light will not turn on during daylight hours, even if motion is detected, to conserve energy.

Image 5.1: The light automatically illuminates when motion is detected.

6. Mantemento

To ensure optimal performance and longevity of your Xanlite APS300, follow these maintenance guidelines:

• Limpar o panel solar: Limpe o panel solar regularmente cun pano suave eamp cloth to remove dust, dirt, leaves, or snow. A clean panel ensures efficient charging.
• Inspeccionar por danos: Periodically check the light for any signs of physical damage or wear.
• Evite produtos químicos agresivos: Do not use abrasive cleaners or solvents on the light, as they may damage the finish or components.

Image 6.1: The light is designed to withstand rain and garden watering (IP44 protection).

Image 6.2: The light is resistant to cold temperatures and snow.

7 Solución de problemas

If you encounter issues with your Xanlite APS300, refer to the table below for common problems and solutions:

8. Especificacións

Detailed technical specifications for the Xanlite APS300 Solar LED Wall Light:

Image 8.1: Dimensional diagram of the light (193mm width, 65mm height).

9. Garantía e soporte

Información da garantía:

This Xanlite APS300 product comes with a 2 ano de garantía from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

Atención ao cliente:

For technical assistance, warranty claims, or any questions regarding your Xanlite APS300, please contact Xanlite customer service. Refer to the official Xanlite websitio web ou na documentación da súa compra para obter datos de contacto específicos.

This product is recyclable. Please dispose of it at designated collection points (e.g., Recyclum in France) to support environmental protection.