Manual do usuario do aplique de parede LED Troy Lighting LBLEDWT3LBM018 LS

1. Introdución

Grazas pola compraasing the Troy Lighting LBLEDWT3LBM018 LS LED Wall Sconce. This product is designed to provide efficient and adjustable lighting for various indoor environments. This manual provides essential information for safe installation, proper operation, and effective maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation or use, and retain them for future reference.

1.1 Información de seguridade

• AVISO: Risco de descarga eléctrica. Desconecte a alimentación na caixa de fusibles ou no disyuntor antes da instalación ou do mantemento.
• Todas as conexións eléctricas deben cumprir cos códigos e ordenanzas locais ou co Código Eléctrico Nacional (NEC). Consulte cun electricista cualificado se non está familiarizado coas conexións de cableado eléctrico axeitadas.
• Esta luminaria está pensada só para uso en interiores. Non a expoña á auga nin á humidade.
• Do not attempt to alter the fixture. Any modifications may void the warranty and create a safety hazard.
• Manexa o aparello con coidado. Evita deixalo caer ou sometelo a impactos fortes.

Figura 1: Fronte view of the Troy Lighting LBLEDWT3LBM018 LS LED Wall Sconce in Gloss White finish.

2. Compoñentes incluídos

Carefully unpack your fixture and identify all parts. Ensure all components are present and undamaged before discarding packaging materials.

• 1 x LED Bullet Head Miter Arm Wall Sconce (18" Arm, Gloss White)
• 1 x Mounting Hardware Kit (includes mounting plate, screws, wire nuts)
• 1 x manual de instrucións

Figura 2: En ángulo view of the Troy Lighting LBLEDWT3LBM018 LS LED Wall Sconce, highlighting the miter arm and bullet head.

3. Instrucións de instalación

Importante: Before starting installation, ensure the power supply to the circuit is turned off at the circuit breaker or fuse box. If you are unsure about electrical wiring, consult a qualified electrician.

1. Prepare a zona de instalación: Asegúrate de que a superficie da parede estea limpa, seca e estruturalmente sólida para soportar a luminaria.
2. Apagar a enerxía: Locate the circuit breaker or fuse box and turn off the power to the wall switch or outlet where the fixture will be installed. Verify power is off using a voltagprobador.
3. Coloque a placa de montaxe: Secure the mounting plate (included in hardware kit) to the junction box in the wall using the provided screws. Ensure the plate is firmly attached.
4. Realizar conexións eléctricas:
   • Conecta o negro cable desde o aparello ata o negro cable (contento) da caixa de conexións usando unha porca para cables.
   • Conecta o branco cable desde o aparello ata o branco cable (neutro) da caixa de conexións usando unha agarradera para cables.
   • Conecta o chan cable (cobre espido ou verde) desde a luminaria ata o chan wire from the junction box and to the mounting plate using a ground screw.

   Ensure all wire connections are secure and properly insulated with wire nuts.
5. Montar o aparello: Carefully tuck all wires into the junction box. Align the fixture's back plate with the mounting plate and secure it using the provided screws.
6. Restaurar enerxía: Once the fixture is securely mounted, turn the power back on at the circuit breaker. Test the light fixture.

4. Instrucións de funcionamento

The Troy Lighting LBLEDWT3LBM018 LED Wall Sconce is designed for straightforward operation.

• Encendido/apagado: Operate the fixture using the standard wall switch connected to its circuit.
• Axuste da luz: The bullet head of the sconce is adjustable, allowing you to direct the light beam as needed. Gently pivot the bullet head to achieve the desired lighting angle.
• Control remoto (se é o caso): If your installation includes a compatible remote control system (as indicated by "Control Method: Remote" in specifications), refer to the remote control's specific instructions for pairing and operation.

5. Mantemento e coidados

Proper care will ensure the longevity and appearance of your Troy Lighting fixture.

• Limpeza: Turn off power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• Fonte de luz LED: The LED light source in this fixture is non-removable and designed for long-term use. Do not attempt to replace the LED bulb.
• Inspección: Periodically check for any loose connections or signs of wear. If any issues are observed, disconnect power and consult a qualified electrician.

6 Solución de problemas

If you experience issues with your fixture, refer to the following common problems and solutions:

Se estes pasos non resolven o problema, póñase en contacto co servizo de atención ao cliente ou cun electricista cualificado.

7. Especificacións do produto

8. Información da garantía

This Troy Lighting product is covered by a 1 ano de garantía limitada from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications. For warranty claims, please retain your proof of purchase and contact customer support.

9. Atención ao cliente

If you have any questions, require assistance with installation, or need to report a problem with your Troy Lighting LBLEDWT3LBM018 LS LED Wall Sconce, please contact Troy Lighting customer service or your retailer. Please have your model number (LBLEDWT3LBM018) and proof of purchase ready when contacting support.

For more information about Troy Lighting products, you may visit the official Troy Lighting websitio web ou a súa tenda en Amazon: Troy Lighting Amazon Store.