Introdución
This manual provides essential information for the safe and efficient use of your KOR 9W LED A19 Light Bulbs. These bulbs are designed as a 60W equivalent, non-dimmable lighting solution, providing 750 lumens of bright daylight (5000K) illumination. Featuring a standard E26 base and a long lifespan of 15,000 hours, they are UL Listed for safety and reliability.
Características do produto
- Eficiencia enerxética: 9-watt LED bulb provides light equivalent to a 60-watt incandescent bulb, significantly reducing energy consumption.
- Alto Brillo: Delivers 750 lumens of light output.
- Temperatura de cor da luz do día: Features a 5000K (Bright White - Daylight) color, creating a clear and vibrant ambiance.
- Base estándar: Equipped with a common E26 medium screw base for wide compatibility with existing fixtures.
- Longa vida útil: Engineered for an average life of 15,000 hours, ensuring long-lasting performance.
- Activación instantánea: Provides full brightness immediately upon switching on.
- Non regulable: Designed for on/off operation only; not compatible with dimmer switches.
- Listado UL: Certificado polos estándares de seguridade e calidade.
- Sen parpadeos: Designed to provide stable illumination without noticeable flicker.
Información de seguridade
Please read and understand all safety instructions before installing or using the light bulbs. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Risco de descarga eléctrica: Always turn off the power to the fixture and allow the bulb to cool before replacing.
- Not for Dimmers: Estas lámpadas non son regulables. Non as empregue con interruptores reguladores, xa que isto podería danar a lámpada ou o regulador.
- Só para uso en interiores: Designed for indoor applications. Do not use in wet locations or enclosed fixtures unless specified.
- Vol. Apropiadotage: Asegúrate do volume da luminariatage matches the bulb's specified voltage (120 voltios).
- Manipular con coidado: Avoid dropping or subjecting the bulbs to excessive force.
- Eliminación: Desfágase das lámpadas segundo a normativa local.
Configuración e instalación
Installing your KOR LED A19 light bulb is a simple process. Follow these steps for proper installation:
- Apagar a enerxía: Antes da instalación, asegúrese de que a luz estea desconectada no disyuntor ou no interruptor de parede.
- Eliminar a lámpada antiga: Carefully unscrew the old light bulb from the fixture. Allow it to cool if it has been recently in use.
- Inserir lámpada nova: Gently screw the KOR 9W LED A19 bulb into the E26 medium screw base socket until it is finger-tight. Do not overtighten.
- Restaurar enerxía: Volva a conectar a corrente no disyuntor ou no interruptor de parede.
- Verificar o funcionamento: Flip the light switch to confirm the bulb is working correctly.


Instrucións de funcionamento
The KOR 9W LED A19 Light Bulbs are designed for straightforward operation.
- Once installed, simply use your existing wall switch to turn the light on or off.
- These bulbs provide instant-on illumination, reaching full brightness immediately.
- As these are non-dimmable bulbs, they should only be used in fixtures controlled by a standard on/off switch.


Mantemento
KOR LED A19 light bulbs require minimal maintenance due to their long lifespan and durable design.
- Limpeza: Para limpar a lámpada, asegúrate de que a alimentación estea apagada e que a lámpada estea fría. Limpe con suavidade cun pano suave e seco. Non empregues produtos de limpeza líquidos nin materiais abrasivos.
- Substitución: Replace bulbs only after they have cooled down completely.
- Almacenamento: Se gardas lámpadas sen usar, gárdaas na súa embalaxe orixinal nun lugar fresco e seco para protexelas de danos.
Resolución de problemas
If you encounter issues with your KOR LED A19 light bulb, refer to the following common problems and solutions:
| Problema | Causa posible | Solución |
|---|---|---|
| A lámpada non se acende. |
|
|
| O bulbo parpadea. |
|
|
| A luz é demasiado tenue ou demasiado brillante. |
|
|

Especificacións
| Atributo | Detalle |
|---|---|
| Marca | KOR |
| Número de modelo | K20634 |
| Tipo de luz | LED |
| Wattage | 9 vatios |
| Equivalente incandescente | 60 vatios |
| Tamaño da forma do bulbo | A19 |
| Base de bulbo | E26 (Standard US Base) |
| Brillo | 750 lúmenes |
| Temperatura da cor | 5000 Kelvin (Branco de luz do día) |
| Voltage | 120 voltios |
| Vida Media | 15,000 horas |
| Característica especial | Non-Dimmable, Instant On |
| Certificación | Listado UL |
| Dimensións do produto | 2.36" de ancho x 4.09" de alto |
| Peso do elemento | 7.4 ounces (per bulb, approx.) |
| Material | Ferro |
| Uso interior/exterior | Interior |

Garantía e Soporte
For any questions, technical assistance, or support regarding your KOR LED A19 Light Bulbs, please contact the seller or manufacturer directly. While specific warranty details are not provided in this manual, most lighting products come with a standard manufacturer's warranty against defects in materials and workmanship.
Conserve o recibo de compra como proba de compra para calquera reclamación de garantía.
Para obter máis axuda, pode visitar o KOR Store on Amazon.





