Ideal Standard A6726AA Concealed Shower Mixer Tap User Manual

1. Produto rematadoview

The Ideal Standard A6726AA is a concealed single-lever shower mixer tap designed for modern bathrooms. This unit features a 47 mm cartridge with an EKO system, ensuring efficient water flow and temperature control. It is built for a recessed installation, providing a sleek and minimalist aesthetic. The mixer includes 1/2 inch supply and drain connections and comes with its built-in housing. Please note that additional shower parts are not included and must be acquired separately.

2. Información de seguridade

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in personal injury or property damage.

• Instalación profesional recomendada: Installation should be performed by a qualified plumber in accordance with local plumbing and building codes.
• Subministro de auga: Asegúrese de que o subministro principal de auga estea pechado antes de comezar calquera traballo de instalación ou mantemento.
• Seguridade da auga quente: Exercise caution when adjusting hot water temperatures to prevent scalding.
• Ferramentas: Use appropriate tools for installation. Improper tools can damage the product or cause injury.
• Limpeza: Empregue só produtos de limpeza suaves como se especifica na sección de mantemento para evitar danar o acabado cromado.

3. Configuración e instalación

This section provides general guidelines for the installation of your Ideal Standard A6726AA concealed shower mixer tap. For detailed instructions, always refer to the specific installation guide provided with the product packaging.

3.1 Contido do paquete

• Concealed single lever shower mixer unit
• Built-in housing
• Installation hardware (screws, seals, etc.)

Note: Shower parts such as shower heads, hoses, and wall outlets are not included and must be purchased separately.

3.2 Pasos de instalación (xerais)

1. Prepara o muro: Create an opening in the wall suitable for the built-in housing, ensuring it aligns with the desired position for the mixer.
2. Montar a carcasa: Secure the built-in housing within the wall opening according to the manufacturer's instructions, ensuring it is level and plumb.
3. Conectar subministracións de auga: Connect the 1/2 inch hot and cold water supply lines to the designated inlets on the mixer unit. Ensure all connections are watertight.
4. Conectar a toma de corrente: Connect the 1/2 inch mixed water outlet to the shower system.
5. Install Mixer Cartridge and Trim: Insert the 47 mm cartridge into the housing. Attach the decorative trim plate and handle, ensuring they are securely fastened and operate smoothly.
6. Proba de fugas: Slowly turn on the main water supply and check all connections for leaks. Operate the mixer to ensure proper function and temperature control.

Figure 1: The Ideal Standard A6726AA concealed shower mixer tap, showcasing its chrome finish and single lever design, integrated seamlessly into a tiled shower wall.

Figure 2: Technical diagram detailing the dimensions and connection points for the A6726AA mixer. This diagram is crucial for proper rough-in and installation planning.

4. Funcionamento

The Ideal Standard A6726AA features a single lever for intuitive control of both water flow and temperature.

• Activar/Desactivar: Lift the lever to turn on the water. Push it down to turn off.
• Axuste do fluxo de auga: The further you lift the lever, the greater the water flow.
• Axuste da temperatura: Swivel the lever left for hotter water and right for colder water. The 47 mm EKO system cartridge helps in precise temperature and flow management.

5. Mantemento

Proper care and maintenance will ensure the longevity and aesthetic appeal of your Ideal Standard shower mixer.

• Limpeza do acabado: Clean the chrome finish regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
• Evite produtos de limpeza agresivos: Do not use abrasive cleaners, scouring pads, acids, ammonia, bleach, or other harsh chemicals, as these can damage the chrome finish and internal components. The product is designed to be tarnish resistant, but harsh chemicals can compromise this feature.
• Mantemento do cartucho: If you experience persistent drips or difficulty in adjusting temperature/flow, the 47 mm ceramic cartridge may require cleaning or replacement. This task should ideally be performed by a qualified plumber.

6 Solución de problemas

Antes de contactar co servizo de atención ao cliente, consulta os seguintes problemas e solucións comúns:

Se o problema persiste despois de intentar estas solucións, póñase en contacto cun fontaneiro cualificado ou co servizo de atención ao cliente de Ideal Standard.

7. Especificacións

8. Garantía e soporte

Ideal Standard products are manufactured to high-quality standards and are backed by a manufacturer's warranty. The specific terms and duration of the warranty may vary by region and product.

• Reclamacións de garantía: In the event of a defect or issue covered by the warranty, please retain your proof of purchase and contact the retailer where the product was purchased or Ideal Standard customer service directly.
• Atención ao cliente: For technical assistance, spare parts, or further inquiries, please visit the official Ideal Standard website or contact their customer support line in your region. Contact details can typically be found on the product packaging or the manufacturer's websitio.