1. Información de seguridade
Operating a chainsaw can be dangerous if proper safety precautions are not followed. Always read and understand the entire instruction manual before operating the Stihl MS 201 TC-M chainsaw. Failure to follow safety instructions can result in serious injury or death.
Equipos de protección individual (EPI)
- Protección da cabeza: Wear a safety helmet with face and hearing protection.
- Protección ocular: Use sempre lentes ou lentes de seguridade.
- Protección das mans: Use luvas de traballo resistentes.
- Protección das pernas: Use pantalóns ou chalecos de protección contra motoserras.
- Protección dos pés: Wear safety boots with steel toes and non-slip soles.
Fuel Handling Safety
- Always mix and handle fuel in a well-ventilated area, away from ignition sources.
- Use só recipientes de combustible homologados.
- Non fumes mentres repostas.
- Limpe inmediatamente o combustible derramado.
2. Produto rematadoview
The Stihl MS 201 TC-M is a powerful and compact gasoline-powered chainsaw designed for professional tree care and pruning. It features a 35 cm cutting length and is equipped with advanced engine technology for efficient operation.
Figure 2.1: Top-side view of the Stihl MS 201 TC-M chainsaw, highlighting the ergonomic handle and engine housing.
Figura 2.2: Lateral view of the Stihl MS 201 TC-M chainsaw, showing the Stihl branding and engine components.
3. Configuración
Desembalaxe e montaxe
- Retire coidadosamente todos os compoñentes da embalaxe.
- Inspect for any shipping damage. If damaged, do not use and contact your dealer.
- Asegúrese de que estean presentes todas as pezas listadas na lista de embalaxe.
Instalación de barras e cadeas
Proper installation of the guide bar and saw chain is crucial for safe and efficient operation.
- Asegúrese de que o freo da cadea estea desactivado.
- Remove the chain sprocket cover by loosening the nuts.
- Coloque a barra guía sobre os pernos.
- Fit the saw chain around the sprocket and into the guide bar groove. Ensure the cutting edges face forward on the top of the bar.
- Replace the chain sprocket cover and hand-tighten the nuts. Do not fully tighten yet.
- Adjust chain tension (refer to 'Chain Tension Adjustment' in Section 5).
- Fully tighten the chain sprocket cover nuts.
Imaxe 3.1: Primeiro plano view of the chainsaw's chain and guide bar, illustrating proper assembly.
Fuel and Chain Oil Filling
The MS 201 TC-M operates on a gasoline-oil mixture and requires chain lubricant.
- Combustible: Use a high-quality unleaded gasoline mixed with Stihl 2-stroke engine oil at the recommended ratio (typically 50:1). Refer to the fuel tank cap for specific ratios.
- Aceite de cadea: Fill the chain oil tank with high-quality bar and chain lubricant. Do not use waste oil.
Ensure both caps are securely tightened after filling.
4. Instrucións de funcionamento
Arrancando a motoserra
- Place the chainsaw on a firm, level surface.
- Active o freo da cadea empurrando o protector dianteiro da man cara adiante.
- Set the master control lever to the cold start position (choke).
- Hold the chainsaw firmly with one hand on the front handle and place your foot on the rear handle.
- Pull the starter cord slowly until resistance is felt, then pull briskly until the engine fires briefly.
- Move the master control lever to the half-throttle position.
- Tirar do cordón de arranque de novo ata que o motor arranque.
- Blip the throttle to disengage the half-throttle and return to idle.
- Desactive o freo da cadea antes de comezar as operacións de corte.
Parando a motoserra
To stop the engine, move the master control lever to the STOP position.
Funcionamento do freo da cadea
The chain brake is a critical safety feature. It can be engaged manually by pushing the front hand guard forward or automatically by inertia during kickback. Always ensure the chain brake is functional before each use.
5. Mantemento
Regular maintenance ensures the longevity and safe operation of your Stihl MS 201 TC-M chainsaw.
Axuste da tensión da cadea
Correct chain tension is vital. A loose chain can derail, and an overly tight chain can cause premature wear to the bar and chain, and reduce engine power.
- Loosen the nuts on the chain sprocket cover.
- Using the tensioning screw, adjust the chain until it fits snugly against the underside of the guide bar, but can still be pulled around by hand.
- Lift the tip of the guide bar slightly while tightening the nuts on the chain sprocket cover.
- Check tension again.
Afiado da cadea
A sharp chain is essential for efficient and safe cutting. Sharpen the chain regularly or have it professionally sharpened.
Limpeza do filtro de aire
Clean the air filter regularly to maintain engine performance and prevent damage. Remove the filter cover and clean the filter element with warm soapy water or compressed air. Replace if damaged.
Inspección de bujías
Inspect the spark plug for wear and proper gap. Replace if electrodes are worn or fouled. Refer to the specifications for the correct spark plug type and gap.
Mantemento da barra guía
Limpe regularmente a ranura da barra guía e os orificios de aceite. Dé a volta á barra guía periodicamente para garantir un desgaste uniforme.
6 Solución de problemas
This section addresses common issues you might encounter with your Stihl MS 201 TC-M chainsaw.
| Problema | Causa posible | Solución |
|---|---|---|
| O motor non arranca | No fuel, incorrect starting procedure, fouled spark plug, clogged fuel filter. | Check fuel level, follow starting instructions, clean/replace spark plug, check fuel filter. |
| O motor funciona, pero a cadea non se move | Freo de cadea accionado, problema coa embreagem. | Disengage chain brake. If problem persists, contact service. |
| Baixo rendemento de corte | Cadea desafilada, tensión incorrecta da cadea, barra guía desgastada. | Afiar a cadea, axustar a tensión da cadea, inspeccionar/substituír a barra guía. |
| Vibración excesiva | Loose components, damaged chain/bar, engine issue. | Check all fasteners, inspect chain/bar for damage, contact service if engine related. |
7. Especificacións
Key technical specifications for the Stihl MS 201 TC-M chainsaw:
- Número de modelo: MS 201
- Fonte de enerxía: Gasolina
- Lonxitude de corte: 35 cm
- Peso do artigo: 3.85 kg (8.49 lb)
- Dimensións do produto: 37 x 10 x 37 cm (14.57 x 3.94 x 14.57 polgadas)
- Material: Plástico (carcasa)
- Fabricante: STIHL
- GTIN (UPC): 00795711953546
8. Garantía e soporte
For warranty information, please refer to the warranty card included with your product or contact your authorized Stihl dealer. Keep your proof of purchase for warranty claims.
For technical support, spare parts, or service, please contact your local authorized Stihl service center. Only use genuine Stihl replacement parts and accessories.
