Introdución
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Pro-Ject Essential III Beatles Turntable. Please read this manual carefully before using the product to ensure proper function and longevity.
Contido do paquete
Before beginning, please verify that all items listed below are present in your package:
- Ortofon OM10 Phono Cartridge
- 15 V DC Universal Power Supply
- Hinged Acrylic Dust Cover
- Connect It E Audio Cable
- 7" 45 RPM Adaptor
Image: The Pro-Ject Essential III Beatles Turntable, showcasing its unique design and components.
Configuración
Follow these steps to set up your turntable for optimal performance:
- Desembalaxe: Retire con coidado todos os compoñentes da embalaxe. Garde a embalaxe para futuros transportes ou almacenamentos.
- Colocación: Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and strong vibrations. Ensure adequate ventilation.
- Instalación do prato: Gently place the acrylic platter onto the spindle. Ensure it sits flush.
- Instalación de correa: Carefully loop the silicone drive belt around the sub-platter and the motor pulley. Ensure the belt is not twisted.
- Cartridge Alignment (Pre-mounted): The Ortofon OM10 cartridge comes pre-mounted. Verify it is securely attached to the tonearm.
- Tonearm Balance: Adjust the counterweight at the rear of the tonearm until the tonearm floats freely and horizontally. Then, set the tracking force according to the cartridge manufacturer's specifications (typically 1.5g for Ortofon OM10).
- Anti-skating Adjustment: Attach the anti-skating weight to the designated groove on the tonearm support.
- Funda antipolvo: Attach the hinged acrylic dust cover to the rear hinges of the turntable.
- Conexións: Connect the Connect It E Audio Cable from the turntable's RCA outputs to your phono preamplifier ou amplifier's phono input. Connect the 15V DC universal power supply to the turntable and then to a power outlet.
Image: Detail of the motor pulley and belt drive system.
Image: The tonearm and pre-mounted Ortofon OM10 cartridge.
Instrucións de funcionamento
To play a record:
- Encendido: Flip the power switch located on the side of the plinth to the 'On' position. The platter will begin to spin.
- Seleccionar velocidade: The turntable supports 33 1/3 RPM and 45 RPM. To change speed, manually move the drive belt to the appropriate step on the motor pulley. Use the 7" 45 RPM adaptor for singles.
- Rexistro do lugar: Carefully place your vinyl record onto the platter.
- Brazo elevador: Use a palanca de elevación do brazo para levantar o brazo.
- Posición do estilete: Mova suavemente o brazo sobre o suco inicial desexado do disco.
- Brazo inferior: Slowly lower the tonearm using the lift lever. The stylus will descend onto the record, and playback will begin.
- Fin da reprodución: At the end of the record, use the tonearm lift lever to raise the tonearm, then return it to its rest. Flip the power switch to 'Off'.
Image: Power switch location on the turntable plinth.
Mantemento
Regular maintenance ensures the longevity and optimal performance of your turntable:
- Funda antipolvo: Always use the dust cover when the turntable is not in use to protect it from dust and debris.
- Cleaning the Plinth: Wipe the plinth with a soft, dry, lint-free cloth. Avoid using abrasive cleaners or solvents.
- Limpeza do punteiro: Use a dedicated stylus brush or cleaning fluid to gently clean the stylus before or after each play. Brush from back to front.
- Rexistros de limpeza: Keep your records clean using a record brush or a record cleaning machine to prevent dust from accumulating on the stylus.
- Inspección da correa: Periodically inspect the drive belt for wear or stretching. Replace if necessary.
Resolución de problemas
Se tes problemas co teu tocadiscos, consulta os seguintes problemas e solucións comúns:
| Problema | Causa posible | Solución |
|---|---|---|
| No power / Turntable not spinning | Power cable disconnected; Power outlet faulty; Power switch off. | Check power connections; Try a different outlet; Ensure power switch is 'On'. |
| Sen son ou son moi baixo | Entrada incorrecta seleccionada en amplifier; Cartridge not connected properly; Amplifier volume too low; No phono preampmáis vivo. | Select correct input (Phono); Check cartridge wiring; Increase volume; Ensure a phono preamplifier is used if your amplifier lacks one. |
| Distorted sound / Skipping | Stylus dirty or worn; Tracking force incorrect; Anti-skating incorrect; Record dirty or damaged. | Clean stylus; Re-adjust tracking force and anti-skating; Clean or replace record. |
| Ruído de zumbido | Cable de terra non conectado; Interferencia doutros dispositivos electrónicos. | Ensure ground wire is connected to amplifier's ground terminal; Move turntable away from other electronics. |
| Speed inconsistency | Drive belt worn or improperly seated; Motor issue. | Check and re-seat drive belt; Replace belt if worn. If problem persists, contact support. |
Especificacións
| Característica | Detalle |
|---|---|
| Nome do modelo | Essential III Sgt. Pepper |
| Marca | Pro-Xect |
| Dimensións (L x W x H) | 12.99 x 16.54 x 4.41 polgadas |
| Peso do elemento | 11 libras (aprox. 5 kg) |
| Tecnoloxía de conectividade | RCA |
| Material | Madeira enxeñada, plástico |
| Sistema de accionamento | Transmisión por correa con motor síncrono e correa de silicona |
| Prato | Acrylic (Acryl it E upgrade) |
| Brazo de ton | 8.6" Aluminium Tonearm |
| Cartucho | Pre-mounted Ortofon OM10 |
| Consumo de enerxía en modo activado | 4.5 vatios |
Garantía e Soporte
Para obter información sobre a garantía e asistencia técnica, consulte a páxina oficial de Pro-Ject Audio Systems. websitio web ou póñase en contacto co seu distribuidor autorizado. Garde o comprobante de compra para reclamacións de garantía.
Fabricante: Sistemas de audio Pro-Ject
Primeiro dispoñible: 31 de maio de 2017
Política de devolución: 30-day refund/replacement (as per Amazon's policy at time of data retrieval).
Para obter máis asistencia, visite o Pro-Ject Store on Amazon.
