Introdución
Welcome to the user manual for your new ThruNite TC12 V2 EDC Flashlight. This powerful and versatile LED flashlight is designed for everyday carry, offering exceptional brightness, reliable performance, and convenient USB-C recharging. Please read this manual carefully to ensure proper use, maintenance, and to maximize the lifespan of your device.
Image: The ThruNite TC12 V2 flashlight shown alongside its rechargeable 18650 battery.
Contido do paquete
Upon opening your ThruNite TC12 V2 package, you should find the following items:
- 1 x ThruNite TC12 V2 Cool White Flashlight
- 1 x ThruNite 18650 Rechargeable Battery (3400mAh)
- 1 x cable de carga USB-C
- 1 x cordón
- 1 x funda
- 1 x Pocket Clip (pre-installed or separate)
- Juntas tóricas de recambio
- Spare USB Port Cover
Image: All items included in the ThruNite TC12 V2 flashlight package, laid out for inspection.
Configuración
Instalación de baterías
- Desenrosque a tapa traseira da lanterna xirándoa en sentido antihorario.
- Insert the included ThruNite 18650 battery with the positive (+) end facing towards the head of the flashlight (towards the LED).
- Screw the tail cap back on clockwise until it is securely tightened. Ensure the tail cap is fully tightened for proper electrical contact and water resistance.
Cargando
The TC12 V2 features a built-in USB-C charging port for convenient recharging of the included 18650 battery.
- Localiza o porto de carga USB-C no lateral da lanterna, normalmente cuberto por unha tapa de goma.
- Levante con coidado a solapa de goma para expoñer o porto.
- Connect the included USB-C cable to the flashlight's port and the other end to a USB power source (e.g., computer, wall adapter, power bank).
- The indicator light on the side switch will show the charging status:
- Azul: Charging complete.
- Vermello: Carga en curso.
- Once charging is complete, disconnect the USB-C cable and firmly press the rubber flap back into place to ensure water resistance.
Imaxe: Primeiro plano view of the ThruNite TC12 V2 flashlight, highlighting the USB-C charging port located on the side.
Operación
The TC12 V2 features both a tail switch and a side switch for versatile operation.
Tail Switch Operations
- Momentaneamente activado: Lightly press the tail switch for momentary illumination. Release to turn off.
- Constante aceso/apagado: Fully press the tail switch until it clicks to turn the flashlight on or off.
- Turbo instantáneo: From off, fully press and hold the tail switch to activate Turbo mode instantly. Release to turn off.
Image: The tail cap of the ThruNite TC12 V2 flashlight, where the primary power switch is located.
Side Switch Operations (when flashlight is ON via tail switch)
- Cambiar modos: From ON, press and hold the side switch to cycle through Firefly, Low, Medium, and High modes. Release the switch to select the desired mode. The flashlight has mode memory and will turn on in the last used general mode (excluding Turbo and Strobe).
- Turbo instantáneo: Double-click the side switch quickly to activate Turbo mode. Double-click again to return to the previous mode.
- Modo estroboscópico: Triple-click the side switch quickly to activate Strobe mode. Double-click to return to the previous mode.
- Modo vagalume: From OFF, press and hold the side switch for 1 second to activate Firefly mode.
Image: The ThruNite TC12 V2 flashlight, highlighting the side switch with its integrated indicator light.
Mantemento
- Limpeza: Regularly clean the threads and O-rings with a clean cloth. Apply a thin layer of silicone grease to the O-rings periodically to maintain water resistance.
- Coidado da batería: Store the battery in a cool, dry place when not in use. If the flashlight will not be used for an extended period, remove the battery to prevent parasitic drain and potential damage.
- Porto USB: Ensure the rubber cover for the USB-C charging port is always securely closed when not charging to prevent dust and water ingress.
- Limpeza de lentes: Use a soft, lint-free cloth to clean the lens. Avoid abrasive materials that could scratch the surface.
Resolución de problemas
If you encounter issues with your ThruNite TC12 V2, please refer to the table below for common problems and their solutions.
| Problema | Causa posible | Solución |
|---|---|---|
| A lanterna non se acende. | Battery is dead or improperly installed. Tail cap is loose. | Charge the battery. Ensure battery is inserted with positive (+) end towards the head. Tighten the tail cap fully. |
| A luz é tenue ou parpadea. | Low battery. Poor contact between battery and contacts. | Recharge the battery. Clean battery contacts and flashlight contacts. Ensure tail cap is tight. |
| O indicador de carga non funciona. | USB cable or power source issue. Charging port cover not fully open. | Try a different USB cable or power source. Ensure the rubber cover is fully open and the cable is inserted correctly. |
| Flashlight gets hot quickly. | Operating in Turbo mode for extended periods. | This is normal for high-output flashlights. Reduce output to a lower mode if it becomes too hot to handle. The flashlight has thermal regulation to prevent overheating. |
Especificacións
Detailed technical specifications for the ThruNite TC12 V2 CW Flashlight:
| Característica | Detalle |
|---|---|
| Modelo | TC12 V2 CW |
| Marca | ThruNite |
| Tipo de fonte de luz | LED |
| Max Output Brightness | 1100 lúmenes |
| Distancia máxima do feixe | 240 metros |
| Fonte de enerxía | Battery Powered (1x 18650 rechargeable battery included) |
| Cargando | USB-C recargable |
| Material | Aluminum (Type III hard-anodized finish) |
| Nivel de resistencia á auga | IPX-8 (2 meters submersible) |
| Resistencia ao impacto | 1 metros |
| Dimensións do produto | 1"D x 1"W x 5.51"H (approx. 25.4mm x 25.4mm x 140mm) |
| Cor | Black (TC12 V2 CW) |
Imaxe: Unha detallada view of the LED emitter and reflector assembly within the ThruNite TC12 V2 flashlight head.
Garantía e Soporte
ThruNite products are manufactured to high quality standards. For specific warranty details and support inquiries, please refer to the warranty card included in your product packaging or visit the official ThruNite website. You may also contact ThruNite customer service directly for assistance with product operation, troubleshooting, or warranty claims.
For the most up-to-date information and contact methods, please visit: www.thrunite.com
