Total Control WM1411 TV Wall Mount User Manual

1. Produto rematadoview

The Total Control WM1411 TV wall mount is designed for secure and stable mounting of television units ranging from 32 to 55 inches. This mount is compatible with various VESA sizes, specifically from 200 x 100 mm up to 400 x 400 mm, ensuring broad compatibility with many TV models. Its slim design allows for a minimal distance of only 19 mm from the wall, providing a sleek, low-profile appearance. All necessary mounting hardware is included for a straightforward installation process.

Características principais:

• Display Size Compatibility: Suitable for all TV sets from 32 to 55 inches.
• Fácil instalación: All installation materials, including screws, wall plugs, and spacers, are provided in the product packaging for simple and easy setup.
• Compatibilidade VESA: Supports VESA sizes from 200 x 100 mm to 400 x 400 mm. VESA is a standard that specifies the distance between the mounting holes on the back of your TV.
• Slim Profile: Mounts TV only 19 mm from the wall.
• Construción duradeira: Made from alloy steel or aluminum for robust support.

2. Información de seguridade

Please read all instructions carefully before installation. Incorrect installation may result in property damage, serious injury, or death. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified installer.

• Asegúrate de que a superficie de montaxe poida soportar con seguridade o peso combinado do soporte e da pantalla.
• Non exceda a capacidade máxima de peso da montura.
• Use appropriate tools and follow all drilling and mounting instructions precisely.
• Always use a stud finder to locate wooden studs for secure mounting. If mounting to concrete or brick, use appropriate anchors.
• Manteña os nenos e as mascotas afastados durante a instalación.
• Periodically check the mount for any signs of wear or loose connections.

3. Contido do paquete

Verifique que todos os compoñentes estean presentes e non estean danados antes de comezar a instalación. Se falta algunha peza ou está danada, non continúe coa instalación e póñase en contacto co servizo de atención ao cliente.

• Wall Plate (Main Bracket)
• Soportes para TV (2 unidades)
• Mounting Hardware Kit (includes various screws, wall anchors, washers, and spacers for TV and wall attachment)

4. Configuración e instalación

4.1. Antes de comezar

• Comprobar o patrón VESA do televisor: Locate the four mounting holes on the back of your TV and measure the horizontal and vertical distance between them. This mount supports VESA patterns from 200x100mm to 400x400mm.
• Determine Wall Type: Identify if your wall is made of wood studs, concrete, or brick. This will determine the type of anchors and drilling required.
• Ferramentas de recollida: You will need a drill, stud finder (for wood walls), level, pencil, measuring tape, and a screwdriver.

4.2. Instalación paso a paso

1. Fixar os soportes do televisor ao televisor: Carefully place your TV face down on a soft, clean surface. Align the two vertical TV brackets with the mounting holes on the back of your TV. Use the appropriate screws and spacers from the hardware kit to secure the brackets. Ensure the brackets are centered and level.
2. Mark Wall Drilling Locations: Hold the wall plate against the wall at your desired TV height. Use a level to ensure it is perfectly horizontal. Mark the drilling points through the holes on the wall plate with a pencil. For wood stud walls, use a stud finder to locate the center of the studs and align the wall plate holes with them.
3. Perforar buratos piloto: Drill pilot holes at the marked locations. The drill bit size will depend on your wall type and the anchors being used (refer to the hardware kit instructions).
4. Install Wall Anchors (if applicable): If mounting to concrete or brick, insert the appropriate wall anchors into the drilled holes. Tap them gently with a hammer until they are flush with the wall surface.
5. Placa de parede segura: Align the wall plate with the drilled holes and secure it to the wall using the provided screws and washers. Tighten all screws firmly but do not overtighten.
6. Montar o televisor na placa de parede: With assistance, carefully lift the TV (with the attached TV brackets) and hook the TV brackets onto the wall plate. Ensure the TV brackets are securely seated on the wall plate.
7. Secure TV to Wall Plate: Locate the safety screws or locking mechanisms on the bottom of the TV brackets. Tighten these screws to secure the TV to the wall plate, preventing accidental dislodgement.

5. Instrucións de funcionamento

The Total Control WM1411 is a fixed TV wall mount, meaning it does not offer tilt, swivel, or extension capabilities. Once installed, its operation is minimal.

• Ajuste seguro: Ensure the TV is securely locked onto the wall plate using the safety screws.
• Xestión de cables Organize and route your TV cables neatly behind the TV or along the wall for a clean appearance.

6. Mantemento

Un mantemento regular axuda a garantir a lonxevidade e a seguridade do soporte de parede para TV.

• Limpeza: Dust the mount periodically with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Comprobación de conexión: Every 6-12 months, visually inspect all screws and connections to ensure they remain tight and secure. Retighten any loose screws.
• Integridade estrutural: Check for any signs of damage, corrosion, or deformation on the mount or the wall. If any issues are found, consult a professional.

7 Solución de problemas

Se tes problemas durante ou despois da instalación, consulta os seguintes problemas e solucións comúns.

• A televisión non está nivelada: Ensure the wall plate was installed perfectly level. If not, carefully adjust the wall plate or use shims if minor adjustments are needed. Re-check with a level.
• A montaxe parece inestable: Double-check that all wall screws are securely tightened and that the correct wall anchors were used for your wall type. Ensure the TV is properly seated and locked onto the wall plate.
• Pezas que faltan: Refer to the 'Package Contents' section. If parts are missing, do not proceed with installation. Contact Total Control customer support for replacement parts.
• TV does not fit the mount: Verify your TV's VESA pattern matches the mount's supported range (200x100mm to 400x400mm). Also, ensure your TV's screen size is within the 32-55 inch range.

8. Especificacións

9. Garantía e soporte

For information regarding warranty coverage for your Total Control WM1411 TV wall mount, please refer to the documentation included with your purchase or visit the official Total Control websitio. Os termos da garantía adoitan cubrir os defectos de fabricación durante un período específico a partir da data de compra.

If you require technical assistance, have questions about installation, or need to report a missing/damaged part, please contact Total Control customer support. Contact details can usually be found on the product packaging or the manufacturer's official websitio.