Manual do usuario do foco LED Philips myLiving PONGEE (modelo 5058131PN)

1. Introdución

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Philips myLiving PONGEE LED Spot Light, Model 5058131PN. Please read these instructions carefully before installation and retain them for future reference.

Figure 1: Philips myLiving PONGEE LED Spot Light

The Philips myLiving PONGEE spot light is designed for indoor use in functional spaces such as bedrooms or living rooms. Its swivel head allows for adjustable light direction, providing illumination precisely where needed.

2. Información de seguridade

Observe sempre as seguintes precaucións de seguridade para evitar lesións ou danos:

• Seguridade eléctrica: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always disconnect power at the main fuse or circuit breaker before installation, maintenance, or bulb replacement.
• Só para uso en interiores: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in bathrooms or other areas where it may be exposed to moisture.
• Tipo de lámpada: Use only GU10 LED bulbs as specified. Do not exceed the maximum wattage indicado no aparello.
• Manexo: Do not touch the bulb immediately after use as it may be hot. Allow it to cool before handling.
• Limpeza: Clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Contido do paquete

Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:

• Philips myLiving PONGEE LED Spot Light fixture (1 unit)
• Ferraxes de montaxe (parafusos, tacos)
• Manual de instrucións

Nota: A GU10 LED bulb is non incluído e debe mercarse por separado.

Figura 2: Embalaxe do produto

4. Configuración e instalación

This spot light is designed for surface mounting on ceilings or walls. Refer to the dimensions diagram for planning your installation.

Figure 3: Product Dimensions (all measurements in mm)

1. Prepare a zona de instalación: Ensure the mounting surface is clean, dry, and structurally sound. Mark the desired mounting points based on the fixture's base.
2. Desconectar a enerxía: Before starting any electrical work, turn off the power supply to the circuit at the main fuse box or circuit breaker.
3. Montar a base: Secure the fixture's mounting base to the ceiling or wall using the provided screws and wall plugs. Ensure it is firmly attached.
4. Conecte o dispositivo: Connect the electrical wires from the ceiling/wall to the fixture's terminals. Follow the standard wiring color codes (e.g., Live to Live, Neutral to Neutral, Earth to Earth). Ensure all connections are secure.
5. Instala a lámpada: Insert a GU10 LED bulb (not included) into the socket by aligning the pins and twisting clockwise until secure.
6. Attach the Fixture Body: Secure the main body of the spot light to the mounted base.
7. Restaurar enerxía: Once installation is complete and all connections are checked, restore power at the main fuse box or circuit breaker.

5. Instrucións de funcionamento

The Philips myLiving PONGEE LED Spot Light is operated via a standard wall switch connected to its electrical circuit.

• Activar/Desactivar: Flip the wall switch to the 'ON' position to illuminate the spot light. Flip it to the 'OFF' position to turn it off.
• Axuste da dirección da luz: The spot light features a swivel head. Gently adjust the light head to direct the beam to your desired area. Avoid excessive force when adjusting.

6. Mantemento

• Limpeza: Ensure the power is off and the fixture is cool before cleaning. Wipe the exterior with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or abrasive materials.
• Substitución da lámpada:
  1. Desconecte a fonte de alimentación no interruptor.
  2. Deixa que a lámpada arrefríe completamente.
  3. Gently twist the old GU10 bulb counter-clockwise to remove it from the socket.
  4. Insert a new GU10 LED bulb by aligning the pins and twisting clockwise until secure.
  5. Restaurar a enerxía.

7 Solución de problemas

8. Especificacións

• Marca: Iluminación Philips
• Número de modelo: 5058131PN
• Dimensións do produto (L x W x H): 10 x 13.8 x 8.2 cm
• Peso do artigo: 345 gramos
• Material: Metal
• Cor: Branco
• Estilo: Moderno
• Tipo de fonte de luz: LED
• Bulb Socket Type: GU10
• Número de lámpadas: 1 (lámpada non incluída)
• Vol. De entradatage: 220-240 voltios
• Fonte de enerxía: Electrical cable (wired)
• Tipo de instalación: Surface Mount (Ceiling/Wall)
• Clasificación IP: IP20 (só para uso en interiores)
• Características especiais: Energy-efficient, Swivel head
• Usos específicos: Home, Bedroom, Living Room

9. Garantía e soporte

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Philips Lighting websitio. Tamén podes contactar co teu vendedor para obter axuda.

Garda o comprobante de compra para calquera reclamación de garantía.