Manual de instrucións do soporte de parede para TV ECHOGEAR MaxMotion EGLF2

1. Introdución

This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your ECHOGEAR MaxMotion Full Motion TV Wall Mount, model EGLF2. This mount is designed to securely hold televisions ranging from 42 to 90 inches and weighing up to 125 lbs. Please read all instructions carefully before beginning installation.

Imaxe: Fronte view of the ECHOGEAR MaxMotion TV Wall Mount EGLF2, showcasing its robust design and articulating arms.

2. Información de seguridade

AVISO: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact ECHOGEAR customer support.

• Non instale este produto en paredes que non sexan estruturalmente sólidas.
• Ensure the mounting surface can support the combined weight of the mount and the television.
• Always use a stud finder to locate the center of wood studs.
• Drill pilot holes to the specified depth and diameter.
• Non aperte demasiado os parafusos.
• Este produto está pensado só para uso en interiores.
• Manteña os nenos e as mascotas afastados durante a instalación.

3. Contido do paquete

Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, do not proceed with installation and contact ECHOGEAR customer support.

• Montaxe da placa de parede
• Soportes para TV (2)
• Kit de ferraxes (varios parafusos, arandelas, espazadores para TV e montaxe na parede)
• Modelo de perforación
• Manual de instrucións

4. Ferramentas necesarias

The following tools are recommended for a successful installation:

• Buscador de pernos
• Broca
• Drill Bits (specific sizes for pilot holes, refer to drilling template)
• Nivel
• Destornillador Phillips
• Chave de tubo (para parafusos de retraso)
• Lapis
• Cinta métrica

5. Configuración e instalación

5.1 Determine Wall Type and Location

This mount is compatible with 16"-24" wood studs, poured concrete, and concrete block walls. Non o instale só sobre cartón xeso.

Image: Illustration of compatible wall types for installation, including wood studs, poured concrete, and concrete block.

5.2 Instalación da placa de parede

1. Localizar Studs: Use a stud finder to locate the edges and center of two adjacent wood studs. Mark the center of the studs at your desired TV height. For concrete walls, mark your desired mounting points.
2. Position Template: Tape the included drilling template to the wall, aligning it with your marked stud centers or concrete mounting points. Use a level to ensure it is perfectly horizontal.


Image: A person drilling pilot holes into a wall using the provided ECHOGEAR drilling template for accurate placement.

3. Perforar buratos piloto: Drill pilot holes through the marked points on the template. Refer to the template for specific drill bit sizes and depths for your wall type.
4. Fixar a placa de parede: Align the wall plate with the drilled holes. Secure it to the wall using the provided lag bolts and washers. Tighten the lag bolts firmly, but do not overtighten.

5.3 TV Bracket Attachment

1. Identificar o patrón VESA: Locate the mounting holes on the back of your TV. Measure the horizontal and vertical distance between these holes to determine your TV's VESA pattern. The EGLF2 mount supports various VESA patterns.
2. Seleccione Hardware: Choose the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern and depth.
3. Coloque os soportes: Secure the two TV brackets to the back of your television. Ensure the brackets are centered and level. Do not overtighten the screws.

5.4 Montaxe do televisor

1. Televisión no ascensor: With assistance, carefully lift the television and hook the TV brackets onto the arms of the wall plate assembly.
2. Televisión segura: Once the TV is securely hooked, engage any safety locking mechanisms on the TV brackets to prevent accidental dislodgement.

6. Funcionamento da montura

The ECHOGEAR MaxMotion mount offers full adjustability for optimal viewing.

6.1 Extensión e retracción

Gently pull the TV away from the wall to extend the mount up to 22 inches. Push the TV back towards the wall to retract it to a minimum distance of 2.4 inches from the wall.

Image: Visual representation of the mount's extension capability (up to 22 inches) and its slim profile when retracted (2.36 inches from the wall).

6.2 Axuste do xiro

The mount allows for up to 130 degrees of swivel (65 degrees left or right, depending on TV size and wall position). Gently pivot the TV to achieve your desired viewángulo de ing.

Image: A television mounted on the ECHOGEAR MaxMotion mount, demonstrating its ability to swivel up to 130 degrees for flexible viewing.

6.3 Axuste da inclinación

The mount features tool-free tilt adjustment, allowing you to tilt your TV up or down by up to 15 degrees to reduce glare or optimize viewdesde diferentes alturas.

Image: Close-up of the mount's mechanism, highlighting the tool-free tilt function that allows for up to 15 degrees of vertical adjustment.

7. Mantemento

Un mantemento regular garante a lonxevidade e o funcionamento seguro do soporte do teu televisor.

• Inspección periódica: Comprobe periodicamente todos os parafusos e bulóns para asegurarse de que seguen axustados. Aperte de novo se é necesario.
• Limpeza: Limpa o soporte cun pano suave e seco. Evita produtos de limpeza ou solventes abrasivos.
• Movemento: Ensure the articulating arms move smoothly. If movement becomes stiff, check for obstructions or contact support.

8 Solución de problemas

Se tes problemas durante ou despois da instalación, consulta os seguintes problemas e solucións comúns:

• A televisión non está nivelada: The mount includes a post-installation leveling feature. Gently rotate the TV to adjust its horizontal alignment.
• A montaxe parece solta: Recheck all wall plate lag bolts and TV bracket screws. Ensure they are tightened securely according to the instructions. Do not overtighten.
• Dificultade para mover o televisor: Ensure no cables are snagged or obstructing movement. Check that the mount's arms are not binding.
• Pezas que faltan: Do not proceed with installation. Contact ECHOGEAR customer support immediately for replacement parts.

9. Especificacións

Image: Illustration highlighting the mount's capacity for TVs up to 90 inches and its heavy-gauge steel construction, capable of holding up to 125 lbs.

10. Garantía e soporte

ECHOGEAR stands behind the quality of its products. For specific warranty details, please refer to the product packaging or the official ECHOGEAR websitio.

If you require assistance with installation, troubleshooting, or have any questions about your ECHOGEAR MaxMotion TV Wall Mount, our Minnesota-based support team is available 7 days a week.

Contacte con Soporte: Refer to the contact information provided on the ECHOGEAR websitio ou embalaxe do produto.

Image: Graphic indicating ECHOGEAR's Minnesota design origin and availability of product support 7 days a week.