Manual do usuario da base de carga Bionik Tetra Power para os controladores Joy-Con de Nintendo Switch

1. Introdución

The Bionik Tetra Power is a compact charging dock designed for Nintendo Switch Joy-Con controllers. It allows for simultaneous charging of up to four Joy-Con controllers, providing a convenient and organized charging solution. This manual provides essential information for the proper setup, operation, and maintenance of your Tetra Power charging dock.

Image 1.1: Bionik Tetra Power Charging Dock in its retail packaging. The packaging highlights its ability to charge four Joy-Con controllers and its compatibility with Nintendo Switch.

Características principais:

• Deseño compacto: Unique cross formation allows simultaneous charging of up to four Joy-Con controllers without occupying excessive space.
• Xestión integrada de cables: Features a built-in system for adjusting and storing the charging cable, promoting a tidy setup.
• LED Charge Status Indicators: Provides clear visual feedback on the charging status of each connected Joy-Con controller.
• Integración estética: Designed to complement the visual style of the Nintendo Switch console.

2. Instrucións de configuración

1. Desempaquetar o dispositivo: Carefully remove the Bionik Tetra Power charging dock from its packaging.
2. Conectar á enerxía: The charging dock features a built-in USB cable. Connect this USB cable to an available USB port on your Nintendo Switch dock or to a compatible USB power adapter (not included).
   

   Image 2.1: The Bionik Tetra Power charging dock viewed from the side, showing its integrated USB cable for power connection.
3. Xestión de cables Utilize the built-in cable management system located at the base of the dock to adjust the cable length and store any excess, ensuring a neat setup.
   

   Image 2.2: The underside of the Tetra Power dock, illustrating the integrated cable management system for organizing the USB cable.

4. Colocación: Place the charging dock on a stable, flat surface near your Nintendo Switch console for convenient access.

3. Instrucións de funcionamento

Charging Joy-Con Controllers:

1. Ensure the Tetra Power charging dock is connected to a power source.
2. Align a Joy-Con controller with one of the four charging slots on the dock. Gently slide the Joy-Con downwards until it clicks into place and makes contact with the charging pins.
   

   Image 3.1: The Tetra Power charging dock with two Nintendo Switch Joy-Con controllers inserted into their respective charging slots.

3. Repeat for additional Joy-Con controllers, up to a maximum of four.

LED Charge Status Indicators:

Each charging slot is equipped with an LED indicator to display the charging status of the connected Joy-Con controller:

• LED vermello: Indica que o controlador Joy-Con está a cargar actualmente.
• LED verde: Indicates that the Joy-Con controller is fully charged.
• Sen LED: Indicates no Joy-Con is connected or the dock is not receiving power.

Imaxe 3.2: Primeiro plano view of the LED charge status indicators on the Tetra Power dock, showing the illuminated status lights.

4. Mantemento

• Limpeza: Disconnect the charging dock from its power source before cleaning. Use a soft, dry cloth to wipe the exterior surfaces. Avoid using abrasive cleaners, solvents, or harsh chemicals.
• Almacenamento: When not in use for extended periods, store the charging dock in a cool, dry place away from direct sunlight and extreme temperatures.
• Manexo: Manexa o dispositivo con coidado. Evita deixalo caer ou sometelo a impactos fortes, xa que poderían danar os compoñentes internos.

5 Solución de problemas

• Joy-Con not charging:
  • Ensure the charging dock is properly connected to a powered USB port.
  • Verify that the Joy-Con controller is correctly seated in the charging slot and making full contact with the charging pins.
  • Check if the USB cable is securely connected to both the dock and the power source.
  • Try connecting the dock to a different USB port or power adapter.
• O indicador LED non se acende:
  • Confirm the charging dock is receiving power.
  • Ensure a Joy-Con controller is properly inserted into the slot.
  • If the Joy-Con is fully charged, the LED will be green. If no Joy-Con is present, the LED will be off.

6. Especificacións

7. Garantía e soporte

Bionik products are manufactured with quality and reliability in mind. For specific warranty information, product support, or to register your product, please visit the official Bionik websitio web ou póñase en contacto directamente co servizo de atención ao cliente. Garde o recibo da compra como proba de compra para calquera reclamación de garantía.

Fabricante: Bionik

Websitio: bionikgaming.com

Image 7.1: The back of the Tetra Power retail box, displaying multilingual features, specifications, and manufacturer contact details including the websitio.