1. Produto rematadoview
The Digoo DG-HOSA Smart Home Security Alarm System is a comprehensive security solution designed to protect your home. This system supports Wi-Fi, GSM, 2G, and 3G networks, offering flexible connectivity options. It features an intuitive control panel with a keypad and display, along with various wireless sensors for motion detection and door/window monitoring. The system can be controlled remotely via the "Easy security" mobile application, providing real-time alerts and management capabilities.
Figure 1.1: Complete Digoo DG-HOSA Smart Home Security Alarm System kit, including the main control panel, PIR motion detector, door/window sensors, and remote controllers.
2. Que hai na caixa
Ao abrir o paquete, comprobe que estean incluídos todos os seguintes compoñentes:
- 1 x Digoo DG-HOSA Home Security Alarm Host (Main Control Panel)
- 1 x Wireless PIR Detector (Passive Infrared Motion Sensor)
- 2 x Mandos a distancia
- 2 sensores de porta/xanela
- 4 x Assist Installation Screws
- 4 x Wall-in Fixed Rubber Blocks
- 1 x 1M USB Power Cable (for 5V power supply)
Figure 2.1: Main control panel shown with a PIR motion detector, a door/window sensor, and a remote controller, representing key components of the system.
3. Guía de configuración
3.1 Initial Power-Up and Network Connection
- Conectar enerxía: Use the provided USB power cable to connect the alarm host to a 5V power source.
- SIM Card Installation (Optional): If using GSM/3G network, insert a compatible SIM card into the designated slot on the side of the control panel.
- Configuración Wi-Fi:
- Download the "Easy security" app from your smartphone's app store.
- Ensure your smartphone and the alarm host are connected to the same Wi-Fi network during the initial setup.
- Follow the in-app instructions to pair the alarm host with your Wi-Fi network.
Figura 3.1: Lateral view of the Digoo DG-HOSA control panel, highlighting the USB power port, SIM card slot, and reset button for initial setup and connectivity.
3.2 Instalación e emparellamento do sensor
The system supports up to 99 sensors. Each sensor needs to be installed and paired with the main control panel.
- Detector de movemento PIR:
- Install the PIR detector in a corner or on a wall where it can cover the desired area, avoiding direct sunlight or heat sources.
- Ensure the detector is at an appropriate height (typically 2-2.2 meters) for optimal coverage.
- Pair the detector with the alarm host via the "Easy security" app or directly through the control panel's menu.
- Sensores de porta/xanela:
- Mount the two parts of the door/window sensor (magnet and main unit) on the door/window frame and the moving part, ensuring they are aligned and within 1 cm of each other when closed.
- Pair the sensors with the alarm host using the same method as the PIR detector.
- Mandos a distancia:
- The remote controllers are typically pre-paired. If not, follow the pairing instructions in the app or manual.
Figure 3.2: Individual components: Wireless PIR Motion Detector (left) and Wireless Door/Window Sensor (right), essential for comprehensive home security coverage.
4. Instrucións de funcionamento
4.1 Usando o panel de control
The main control panel features a touchscreen display and a numeric keypad for direct interaction.
- Armado: Press the "ARM" button or enter your passcode followed by "ARM" to activate the alarm system.
- Desarmado: Press the "DISARM" button or enter your passcode followed by "DISARM" to deactivate the alarm system.
- Función SOS: In an emergency, press the "SOS" button on the panel or remote controller to trigger an immediate alarm and send alerts to pre-programmed contacts.
- Configuración: Navigate through the menu using the touchscreen to adjust system settings, add/remove sensors, set up alarm zones, and configure network preferences.
Figura 4.1: Fronte view of the Digoo DG-HOSA control panel, displaying the touchscreen interface, numeric keypad, and function buttons for system control.
4.2 Mobile App Control ("Easy security")
The "Easy security" app provides full remote control and monitoring capabilities for your alarm system.
- Remote Arm/Disarm: Activate or deactivate the system from anywhere with an internet connection.
- Notificacións en tempo real: Receive instant push notifications for alarm events, low battery alerts, and system status changes.
- Xestión de sensores: Add, remove, or configure individual sensors and their respective defense zones.
- Call and Message Settings: Set up emergency contacts to receive calls and SMS alerts during an alarm.
- Estado do sistema: View the current status of your alarm system and connected sensors.
5. Mantemento
- Substitución da batería: Replace batteries in wireless sensors and remote controllers as indicated by low battery alerts on the control panel or app.
- Limpeza: Gently wipe the control panel and sensors with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Actualizacións de firmware: Periodically check for firmware updates via the "Easy security" app to ensure optimal performance and security.
- Estabilidade da rede: Ensure a stable Wi-Fi and cellular network connection for reliable operation and remote access.
6 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| System not connecting to Wi-Fi | Incorrect Wi-Fi password; Host and phone not on same network during setup; Weak Wi-Fi signal. | Verify password; Ensure both devices are on the same 2.4GHz Wi-Fi network; Move host closer to router. |
| Sensors not triggering alarm | Sensor not paired; Low sensor battery; Sensor placed incorrectly. | Re-pair sensor; Replace sensor battery; Adjust sensor position according to installation guidelines. |
| No push notifications | App notification settings disabled; Network issues; App not running in background. | Enable notifications in app and phone settings; Check internet connection; Ensure app is allowed to run in background. |
| SOS function not calling contacts | No SIM card; Invalid SIM card; Emergency contacts not programmed correctly. | Install active SIM card; Verify SIM card balance/plan; Program emergency contacts via app or control panel. |
7. Especificacións
| Característica | Detalle |
|---|---|
| Marca | DIGOO |
| Modelo | DIGOOWolifui253 (DG-HOSA) |
| Tecnoloxía de conectividade | Wireless (Wi-Fi, GSM, 2G, 3G) |
| Fonte de enerxía | Battery Powered (5V USB Power Cable included) |
| Método de control | App ("Easy security"), Control Panel, Remote Control |
| Dispositivos compatibles | Teléfono intelixente |
| Tipo de alerta | Audio Only, Motion Only (configurable) |
| Max Sensors Supported | 99 |
| Dimensións do produto (L x W x H) | 15 x 7 x 21 centímetros |
| Peso do elemento | 408 g (0.9 libras) |
| Pilas necesarias | 1 Lithium Polymer battery (for host, typically internal/rechargeable) |
| Tipo de instalación | Screw-In (for mounting) |
8. Garantía e soporte
For warranty information and technical support, please refer to the official DIGOO websitio web ou póñase en contacto co servizo de atención ao cliente. Garde o recibo da compra como proba de compra para reclamacións de garantía.
Recursos en liña:
- Official DIGOO Websitio: www.digoo.cc (Nota: Este é un marcador de posición URL, please refer to actual product documentation for correct support links.)
- "Easy security" App Support: Check the app's 'Help' or 'About' section for in-app support options.
