FABER T-Light Island Hood Instruction Manual

1. Información importante de seguridade

Read all instructions carefully before installing or using this appliance. Keep this manual for future reference. Failure to follow these instructions may result in electric shock, fire, or injury.

• Ensure the electrical supply matches the rating plate on the hood.
• A instalación debe ser realizada por un técnico cualificado de acordo coa normativa local.
• Non flamear baixo a campá extractora.
• Limpar regularmente os filtros de graxa para evitar riscos de incendio.
• Este aparello non está pensado para o seu uso por persoas (incluídos nenos) con capacidades físicas, sensoriais ou mentais reducidas, ou con falta de experiencia e coñecementos, a menos que teñan supervisión ou instrucións sobre o uso do aparello por unha persoa responsable da súa seguridade.

2. Produto rematadoview

The FABER T-Light Island Hood is designed for efficient air extraction and filtration in your kitchen. It features a sleek stainless steel finish, LED lighting, and touch controls for ease of use.

Figura 1: Fronte view of the FABER T-Light Island Hood, showcasinpolo seu acabado en aceiro inoxidable e o seu panel de control.

Figure 2: The FABER T-Light Island Hood integrated into a kitchen environment, demonstrating its island mounting type.

3. Configuración e instalación

This island hood is designed for ceiling mounting above a cooking surface. Proper installation is crucial for optimal performance and safety.

3.1 Desembalaxe

Carefully remove the hood from its packaging. Check for any damage during transit. Retain packaging materials for potential future transport or service.

3.2 Montaxe

The hood is designed for island installation. Ensure the ceiling structure can support the weight of the hood (approximately 16 kg). Maintain the recommended distance between the cooking surface and the hood as per local building codes and the hood's specifications.

Figure 3: Technical drawing illustrating the dimensions (in mm) for installation, including width (998 mm), depth (598 mm), and adjustable height (Min. 705 - Max. 1000 mm).

3.3 Conexión eléctrica

Connect the hood to a 240V electrical supply. All electrical connections must comply with local regulations and be performed by a qualified electrician.

3.4 Condución

Connect the air outlet to a suitable ducting system. The hood has an air outlet diameter of 150/120 mm. Ensure the ducting is as short and straight as possible to maximize airflow efficiency.

4. Instrucións de funcionamento

The FABER T-Light Island Hood features intuitive touch controls for easy operation.

4.1 Encendido/apagado

Press the power symbol on the Squarcle Touch control panel to turn the hood on or off.

4.2 Axuste da velocidade do ventilador

Use the '+' and '-' symbols on the touch panel to increase or decrease the fan speed. The hood offers multiple speed settings to suit different cooking needs, with a maximum airflow of 690 m³/h.

4.3 Control de iluminación

Press the light symbol to activate the perimeter LED lighting. Press again to turn off the lights. The LED lighting provides efficient illumination of your cooking area.

5. Mantemento

Regular maintenance ensures the longevity and optimal performance of your hood.

5.1 Limpeza dos filtros de graxa

The hood is equipped with self-supporting, dishwasher-safe grease filters. These filters should be cleaned regularly (approximately every 2-4 weeks, depending on usage) to maintain effective grease capture and prevent fire hazards.

1. Turn off the power supply to the hood.
2. Carefully remove the grease filters.
3. Wash the filters by hand with hot soapy water or place them in a dishwasher on a low-temperature cycle.
4. Asegúrese de que os filtros estean completamente secos antes de volvelos instalar.

5.2 Cleaning the Hood Surface

Clean the stainless steel surfaces with a soft cloth and a non-abrasive cleaner specifically designed for stainless steel. Avoid using abrasive pads or harsh chemicals that could damage the finish.

6 Solución de problemas

If you encounter issues with your hood, refer to the following common problems and solutions:

• A campá non se acende: Check the power supply and ensure the hood is properly plugged in. Verify the circuit breaker has not tripped.
• Baixa potencia de succión: Clean or replace the grease filters. Check for obstructions in the ducting system. Ensure the ducting is correctly installed and not kinked.
• Ruído excesivo: Ensure the hood is securely mounted. Check for loose components or obstructions in the fan. Verify the ducting is properly sealed and free of leaks.
• As luces non funcionan: Check if the LED lights are properly connected. If individual LEDs are out, contact customer support for replacement.

For problems not listed here, or if the issue persists, contact FABER customer support.

7. Especificacións

Figure 4: Energy label for the FABER T-Light Island Hood, indicating an energy class A rating and a noise level of 65 dB (note: 50 dB is likely the minimum, 65 dB max).

8. Garantía e soporte

Information regarding product warranty and customer support is not provided within this document. Please refer to the separate warranty card included with your product or visit the official FABER website for details on warranty coverage, service centers, and technical assistance.