1. Introdución
This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your ONKRON Full Motion TV Wall Mount, model M4-WHT. Please read all instructions carefully before installation to ensure proper setup and to prevent damage or injury.
2. Información importante de seguridade
- Capacidade de peso: Non excedas a capacidade máxima de peso de 35 kg (77 lb). Superar este límite pode provocar lesións graves ou danos materiais.
- Tamaño da pantalla: Este soporte está deseñado para televisores de entre 32 e 65 polgadas.
- Compatibilidade VESA: Ensure your TV's VESA pattern (100x100mm to 400x400mm) is compatible with this mount.
- Tipo de parede: This mount is suitable for installation on solid concrete walls, brick walls, and wood stud walls. Do not install on drywall alone.
- Instalación profesional: If you have any doubts about the installation process or the suitability of your wall, consult a qualified professional.
- Ferramentas: Use appropriate tools and follow all safety precautions when drilling and tightening fasteners.
- Nenos: Manteña os nenos lonxe da zona de instalación durante a configuración.
3. Contido do paquete
Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact ONKRON customer support.
Figure 1: All necessary fasteners and a clear manual are included in the TV mounting kit.
- Wall Plate Assembly (pre-assembled)
- Panel VESA
- VESA Extenders (4 pieces)
- Plastic Covers for cable management
- Hardware Kit (various screws, washers, anchors, wrench)
- Modelo de perforación
4. Ferramentas necesarias (non incluídas)
- Lapis
- Martelo
- Destornillador Phillips
- Taladro eléctrico
- Drill Bits (specific sizes depending on wall type)
- Nivel
- Localizador de montantes (para a instalación de montantes de madeira)
5. Guía de instalación
Watch the official ONKRON M4 Assembly and Configuration Instructions video for a visual guide:
Video 1: ONKRON M4 Assembly and Configuration Instructions. This video demonstrates the step-by-step process of installing the M4 TV wall mount.
5.1. Prepare the Mount
- Use the provided wrench to unscrew the nuts and detach the VESA panel from the main mount assembly.
- Carefully detach the plastic covers from the mount arms. These will be reattached later for cable management.
5.2. Mark Drill Holes on the Wall
Determine your desired TV height and position on the wall.
- Para paredes con montantes de madeira:
- Use a stud finder to locate the center of a wood stud.
- Place the drilling template against the wall at the desired height, ensuring it is level.
- Mark the drill hole locations with a pencil.
- Drill pilot holes with a 5/32" (4mm) drill bit to a minimum depth of 3.1" (80mm). No dowels are needed for wood studs.
- Para muros de formigón/ladrillo:
- Place the drilling template against the wall at the desired height, ensuring it is level.
- Mark the drill hole locations with a pencil.
- Drill holes with a 3/8" (10mm) drill bit to a minimum depth of 3.1" (80mm).
- Insert the provided concrete anchors (dowels) into the drilled holes. Tap gently with a hammer until flush with the wall.
5.3. Instalar a placa de parede
- Align the main wall plate assembly with the drilled holes.
- Secure the wall plate to the wall using the appropriate screws and washers from the hardware kit. Tighten firmly with the wrench.
5.4. Attach VESA Panel to TV
The ONKRON M4-WHT supports VESA patterns from 100x100mm to 400x400mm.
Figure 2: The VESA panel can be extended to fit larger VESA patterns.
- Place your TV face down on a soft, clean surface to prevent scratches.
- Identify your TV's VESA mounting holes.
- If your TV's VESA pattern is 100x100, 100x200, or 200x200, you may not need the VESA extenders. Attach the VESA panel directly to the TV using the correct screws and plastic spacers (if needed to compensate for bolt length or curved screens).
- If your TV's VESA pattern is larger (e.g., 200x300, 200x400, 300x200, 300x300, 300x400, 400x200, 400x300, 400x400), attach the VESA extenders to the VESA panel first, then secure the entire assembly to the TV using the appropriate screws and spacers.
- Aperte todos os parafusos con firmeza, pero non os aperte demasiado.
5.5. Hang Your TV onto the Mount
- With assistance, carefully lift your TV and align the VESA panel (attached to the TV) with the mounting plate on the wall arm.
- Hook the VESA panel onto the mount.
- Secure the TV to the mount by tightening the safety screws located on the VESA panel.
5.6. Xestión de cables
- Route your TV cables through the designated channels on the mount arms.
- Reattach the plastic covers to conceal the cables and provide a clean appearance.
6. Operating the TV Mount
The ONKRON M4-WHT offers versatile adjustments for optimal viewing.
Figure 3: Customize your viewing experience with tilt and extension.
- Axuste de inclinación: The mount allows for a tilt range of -5° to +8°. Loosen the tilt adjustment screws on the VESA panel, adjust the screen to your desired angle, and then re-tighten the screws to secure the position.
- Axuste de xiro: The articulating arm allows the TV to swivel up to 180° (depending on TV size and wall distance). Gently push or pull the TV to achieve the desired viewángulo de ing.
- Extensión: The mount can extend from a minimum distance of 2.1 inches (55mm) from the wall to a maximum of 19.7 inches (500mm).
- Nivelación da pantalla: After installation, the screen can be aligned horizontally by slightly rotating the VESA panel before tightening the final screws.
Figure 4: Achieve a perfect view from anywhere with the 180-degree swivel.
7. Mantemento
- Limpeza: Limpa o soporte cun pano suave e seco. Evita produtos de limpeza ou solventes abrasivos.
- Inspección periódica: Comprobe periodicamente todos os parafusos e conexións para asegurarse de que permanecen axustados e seguros. Volva a apertalos se é necesario.
- Pezas móbiles: The articulating arms are designed for smooth movement. No lubrication is typically required.
8 Solución de problemas
- TV fóra de nivel: If the TV appears unlevel after installation, slightly loosen the screws connecting the VESA panel to the mount, adjust the TV to be level, and then re-tighten the screws.
- O monte séntese solto: Check all wall mounting screws and TV attachment screws. Ensure they are securely tightened. If the issue persists, re-evaluate your wall type and installation method.
- Dificultade para axustar a inclinación/xiro: Ensure no cables are obstructing movement. For tilt, loosen the adjustment screws before attempting to change the angle, then re-tighten.
9. Especificacións
| Característica | Especificación |
|---|---|
| Número de modelo | M4-WHT |
| Compatibilidade do tamaño da pantalla | 32 - 65 polgadas |
| Capacidade de carga máxima | 77 libras (35 kg) |
| Compatibilidade VESA | 100x100mm a 400x400mm |
| Ángulo de inclinación | -5° a +8° |
| Ángulo de giro | Ata 180° (dependendo do tamaño da pantalla) |
| Extensión desde a parede | 2.1" (55mm) to 19.7" (500mm) |
| Material | Aceiro de aliaxe |
| Cor | Branco |
| Dimensións do produto | 16 x 13 x 3 polgadas (pregado) |
| Peso do elemento | 8.1 libras |
10. Garantía e soporte
Os produtos ONKRON sométense a probas múltiplestage quality control. For any questions, technical assistance, or warranty claims, please contact ONKRON customer support. Refer to your product packaging or the official ONKRON websitio para obter a información de contacto máis actualizada.
All necessary fasteners and a clear manual are included in the TV mounting kit. ONKRON full motion TV wall mounts undergo multi-stage quality control and feature sturdy packaging, with expert support ready to assist when needed.
