Sapphire SP-2044A-192-ORB Octa Series Modern Cabinet Handle Instruction Manual

1. Produto rematadoview

The Sapphire Octa Series Modern Cabinet Handle (Model: SP-2044A-192-ORB) is designed to complement various home storage aesthetics. This handle features a straight, flat-faced design with subtle bevelling and layered handle feet, providing an easy-to-grab and functional accent for cabinetry.

As características principais inclúen:

• Oil-rubbed Bronze finish.
• Constructed from durable zinc material.
• Part of the Sapphire modern collection.
• Measures 7.56 inches (192mm) in length.
• Projects 0.5 inches from the cabinet surface.

Figure 1: Sapphire SP-2044A-192-ORB Octa Series Modern Cabinet Handle. This image displays the Sapphire Octa Series Modern Cabinet Handle, featuring a straight, flat-faced design with subtle bevelling and layered handle feet. The handle is shown in an oil-rubbed bronze finish.

2. Configuración e instalación

This cabinet handle is designed for easy installation. Basic tools are required (not included).

2.1 Compoñentes incluídos

• 1 x Sapphire Octa Series Cabinet Handle
• 2 x parafusos de montaxe

2.2 Recommended Tools (Not Included)

• Cinta métrica ou regra
• Lapis
• Drill with appropriate drill bit (typically 3/16" or 5mm for cabinet hardware)
• Screwdriver (Phillips head or flathead, depending on screw type)

2.3 Pasos da instalación

1. Medir e marcar: Determine the desired location for the handle on your cabinet door or drawer. Use a measuring tape to mark the two screw hole centers. The handle has a center-to-center measurement of 192mm (7.56 inches).
2. Perforar buratos piloto: Carefully drill pilot holes through the marked points. Ensure the drill bit size is appropriate for the mounting screws to prevent splitting the wood.
3. Colocar mango: Align the handle with the drilled holes. Insert the mounting screws from the inside of the cabinet door/drawer through the pilot holes and into the handle posts.
4. Seguro: Tighten the screws firmly with a screwdriver until the handle is securely attached. Avoid over-tightening, which can strip the screws or damage the cabinet material.

3. Instrucións de funcionamento

The Sapphire Octa Series Cabinet Handle functions as a pull for opening and closing cabinet doors and drawers. Simply grasp the handle and apply gentle force in the desired direction to operate the cabinet mechanism.

4. Mantemento

To maintain the appearance and functionality of your Sapphire cabinet handle, follow these guidelines:

• Limpeza: Wipe the handle regularly with a soft, damp cloth. For stubborn marks, use a mild soap solution and immediately dry with a clean, soft cloth.
• Evite produtos químicos agresivos: Do not use abrasive cleaners, ammonia-based products, or harsh chemicals, as these can damage the oil-rubbed bronze finish and zinc material.
• Parafusos de verificación: Periodically check the mounting screws for tightness. If the handle feels loose, gently tighten the screws to ensure secure attachment.

5 Solución de problemas

• A asa parece solta:

  Solución: Use a screwdriver to gently tighten the mounting screws from the inside of the cabinet door or drawer. Do not overtighten.

• Handle is difficult to install:

  Solución: Ensure that the pilot holes are drilled correctly and align with the handle's screw posts. Verify that the drill bit size is appropriate for the screws. If issues persist, consult a professional installer.

6. Especificacións

7. Garantía e soporte

Specific warranty information for the Sapphire SP-2044A-192-ORB Octa Series Modern Cabinet Handle is not provided in this manual. For details regarding warranty coverage, returns, or technical support, please contact the retailer where the product was purchased or the manufacturer, Imperial USA, directly.

Conserve o comprobante de compra para calquera reclamación de garantía.