Introdución
The Amazon Basics 4K HDMI 3 Port Switch allows you to connect up to three HDMI source devices to a single HDMI display, such as a TV or projector. This device is ideal for expanding the HDMI input capabilities of your display, enabling seamless switching between various entertainment or work devices. It supports 4K resolution at 30Hz and is HDCP compliant, ensuring compatibility with a wide range of modern equipment.
Información de seguridade
- Lea atentamente todas as instrucións antes do uso.
- Non expoñas o dispositivo á humidade, a temperaturas extremas nin á luz solar directa.
- Use only the provided USB power cable.
- Manter fóra do alcance dos nenos.
- Do not attempt to disassemble or repair the device yourself. Contact qualified service personnel if needed.
Contido do paquete
Verifica que todos os elementos estean presentes no paquete:
- Amazon Basics 4K HDMI 3 Port Switch
- USB Power Cable (for optional power)
- Remote Control (CR2025 battery not included)
Image: The HDMI switch, its remote control, and the USB power cable included in the package.
Produto rematadoview
The HDMI switch features three input ports and one output port, along with a power input and an IR receiver for the remote control.
Imaxe: Unha detallada view of the HDMI switch, highlighting the three HDMI input ports (INPUT1, INPUT2, INPUT3), one HDMI output port (OUTPUT), and the DC 5V power input.
Panel frontal
- LED POWER: Indica o estado da enerxía.
- LED1/LED2/LED3: Indicate which HDMI input is currently active.
- SELECTION Button: Manually switch between HDMI inputs.
- Receptor IR: Recibe sinais do mando a distancia.
Panel traseiro
- HDMI INPUT 1/2/3: Connect your source devices (e.g., game console, Blu-ray player, computer).
- SAÍDA HDMI: Connect to your display device (e.g., TV, projector, monitor).
- DC 5 V: Power input port (optional for some setups, required for 4K resolution or longer cables).
Configuración
Follow these steps to connect your HDMI switch:
- Conectar dispositivos fonte: Plug your HDMI source devices (e.g., gaming console, media player, computer) into the HDMI INPUT 1, 2, and 3 ports on the switch using HDMI cables (sold separately).
- Connect Display Device: Connect your TV, monitor, or projector to the HDMI OUTPUT port on the switch using an HDMI cable (sold separately).
- Connect Power (Optional/Recommended): Insert the small end of the included USB power cable into the DC 5V port on the switch. Plug the USB-A end into a USB power adapter (not included) or a USB port on your TV/computer. While the switch can draw power from HDMI sources, connecting the USB power cable is recommended for stable performance, especially with 4K resolutions or longer HDMI cables.
- Encendido: Ensure all connected devices and the display are powered on. The switch will automatically detect the active input or you can select it manually.
Image: The HDMI switch connected to a laptop via an HDMI input, with the output connected to a display (not fully visible). This illustrates a typical setup.
En funcionamento
The HDMI switch offers two methods for selecting inputs:
Cambio automático
The switch is designed to automatically detect and switch to a newly activated HDMI source. If multiple sources are active, it will typically prioritize the lowest numbered input (Input 1, then Input 2, etc.) or the last active input.
Cambio manual
- Using the SELECTION Button: Press the 'SELECTION' button on the front panel of the switch to cycle through the available HDMI inputs (Input 1 → Input 2 → Input 3 → Input 1...). The corresponding LED will illuminate to indicate the active input.
- Usando o mando a distancia: Point the remote control towards the IR receiver on the front of the switch. Press the desired input number button (1, 2, or 3) to switch directly to that input. Ensure a CR2025 battery is installed in the remote control.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| No picture/signal on display. |
|
|
| Picture flickers or drops out. |
|
|
| O control remoto non funciona. |
|
|
| A conmutación automática non funciona como se esperaba. | Some devices maintain an active signal even when off, preventing auto-switching. | Use manual switching via the button on the switch or the remote control. |
Especificacións
| Característica | Detalle |
|---|---|
| Número de modelo | AZSW3T1A-4K2K |
| Versión HDMI | HDMI 1.4 (Supports 4K@30Hz) |
| Conformidade HDCP | HDCP 1.4 |
| Portos de entrada | 3 x HDMI |
| Portos de saída | 1 x HDMI |
| Resolucións admitidas | Up to 4K (3840x2160) @ 30Hz, 1080p, 720p, etc. |
| Soporte de audio | Soporta varios formatos de audio |
| Fonte de alimentación | DC 5V via USB (optional, USB cable included) |
| Métodos de control | Manual button, IR remote control |
| Dimensións (L x W x H) | 4.49 x 0.79 x 2.8 polgadas (11.4 x 2.0 x 7.1 cm) |
| Peso | 6.9 onzas (195.6 gramos) |
Mantemento
- Limpa o dispositivo cun pano suave e seco. Non empregues produtos de limpeza líquidos nin aerosois.
- Manteña o dispositivo libre de po e residuos para garantir unha ventilación axeitada.
- Almacene nun lugar fresco e seco cando non se use durante períodos prolongados.
Garantía e Soporte
For warranty information and customer support, please refer to the Amazon Basics official website or contact Amazon customer service directly. Keep your purchase receipt for warranty claims.
