Produto rematadoview
The ANKO 200 Lumen COB Emergency LED Night Light is a versatile, cordless, and portable lighting solution designed for various applications. It features COB (Chip-on-Board) LED technology for bright, efficient illumination and offers multiple mounting options including magnetic attachment and adhesive stickers. This light is ideal for use in wardrobes, camping, kitchens, garages, attics, and for night reading, providing reliable light during power outages or in areas without direct power access.
Características clave
- 200 Lumen COB LED: Provides bright and wide illumination.
- Sen fíos e portátiles: Battery-operated for flexible placement and easy transport.
- Varias opcións de montaxe: Includes strong magnets for metal surfaces and adhesive stickers for other flat surfaces.
- Funcionamento simple do interruptor: Easy to turn on and off.
- Deseño duradeiro: Suitable for various indoor environments.
Información de seguridade
- Non expoña o dispositivo a temperaturas extremas nin á luz solar directa.
- Non mergullo o dispositivo en auga ou outros líquidos.
- Empregue só o tipo de batería especificado e asegúrese de manter a polaridade correcta durante a instalación.
- Manter fóra do alcance dos nenos.
- Non intente desmontar nin modificar o dispositivo. Isto anulará a garantía.
- Retire as pilas se non vai usar o dispositivo durante un período prolongado para evitar fugas.
Contido do paquete
- 1 x ANKO 200 Lumen COB Emergency LED Night Light
- Adhesive Stickers (pre-attached or separate, depending on model variant)
- Manual de usuario (este documento)
- Note: Batteries are typically not included and must be purchased separately.
Configuración
Instalación de baterías
- Locate the battery compartment cover on the back of the light.
- Deslice ou solte a tapa para abrir o compartimento.
- Insert the required number of AAA batteries (typically 3x AAA, check device markings) according to the polarity indicators (+/-) inside the compartment.
- Pecha a tapa do compartimento da batería de forma segura.
Opcións de montaxe
The ANKO LED Night Light offers two primary mounting methods:
Montaxe magnética
- The light has built-in magnets on its back.
- Simply attach the light to any ferrous metal surface, such as a refrigerator, metal cabinet, or tool chest.
- Ensure the surface is clean and dry for optimal magnetic adhesion.
Adhesive Sticker Mounting
- If using the adhesive stickers, ensure the desired mounting surface is clean, dry, and smooth.
- Peel off the protective backing from the adhesive sticker(s) on the back of the light.
- Press the light firmly onto the chosen surface for at least 30 seconds.
- Allow the adhesive to set for a few hours (e.g., 24 hours) before applying significant pressure or repositioning.
Instrucións de funcionamento
Activando/Desactivando
The ANKO LED Night Light is operated by a simple toggle switch, typically located on the side or front of the unit.
- Para acender a luz ON, deslice o interruptor á posición "ON".
- Para acender a luz DESACTIVADO, deslice o interruptor á posición "OFF".
Escenarios de uso
- Wardrobes/Closets: Mount inside for easy visibility of clothes and items.
- Armarios de cociña: Provide extra light under cabinets or inside pantries.
- Garages/Attics: Illuminate dark corners or work areas where wired lighting is unavailable.
- Camping/Outdoor (sheltered): Use as a portable light source in tents or temporary shelters.
- Iluminación de emerxencia: Keep readily available for power outages.
- Night Reading: Attach to a headboard or nearby surface for focused light.
Mantemento
Limpeza
- Wipe the exterior of the light with a soft, dry cloth.
- Non empregues produtos de limpeza abrasivos, solventes ou produtos químicos agresivos, xa que poden danar a superficie.
- Ensure the light is off and batteries are removed before cleaning.
Substitución da batería
When the light dims or stops functioning, it is time to replace the batteries.
- Apague a luz.
- Open the battery compartment as described in the "Battery Installation" section.
- Retire as pilas antigas e desbote de acordo coa normativa local.
- Insert new AAA batteries, ensuring correct polarity.
- Pecha o compartimento da batería de forma segura.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non acende. | As baterías están agotadas ou están mal instaladas. | Substitúe as pilas por outras novas, garantindo a polaridade correcta. |
| A luz é débil. | As baterías están baixas. | Substitúe as pilas. |
| Light falls off mounting surface. | Surface is not clean, smooth, or suitable for adhesive/magnet. | Clean the surface thoroughly. For adhesive, ensure it's smooth and allow setting time. For magnetic, ensure it's a strong ferrous metal. |
| Switch feels loose or unresponsive. | Problema de mecanismo interno. | Contact customer support. Do not attempt to repair. |
Especificacións
| Característica | Detalle |
|---|---|
| Modelo | B079MDCYM7 |
| Fonte de luz | LED COB |
| Saída de lumens | 200 lúmenes |
| Fonte de enerxía | Battery (e.g., 3x AAA, not included) |
| Opcións de montaxe | Magnetic, Adhesive Sticker |
| Dimensións | (Specific dimensions not provided in input, placeholder) |
| Peso | (Specific weight not provided in input, placeholder) |
Garantía e Soporte
ANKO products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your purchase or visit the official ANKO websitio. Garde o recibo da compra como xustificante da mesma.
If you encounter any issues or have questions regarding your ANKO LED Night Light, please contact our customer support team:
- Correo electrónico: support@anko.com (Example email, actual contact info may vary)
- Teléfono: 1-800-XXX-XXXX (Example phone, actual contact info may vary)
- Websitio: www.anko.com (Example website, actual contact info may vary)
Please have your model number (B079MDCYM7) and purchase date ready when contacting support.
Important Notes on Media
Imaxes do produto: No useful product images were provided in the source data. The image link provided was a "No image available" placeholder. Therefore, no product images could be embedded in this manual.
Vídeos do produto: No official product videos from the seller were found in the provided data. Therefore, no videos could be embedded in this manual.