Introdución
This manual provides essential instructions for the safe operation, maintenance, and troubleshooting of your eufy BoostIQ RoboVac 11S (Slim) robot vacuum cleaner. Please read this manual thoroughly before using your RoboVac and retain it for future reference.
Instrucións de seguridade importantes
Always follow basic precautions, including:
- Le todas as instrucións antes de usar o aparello.
- Do not operate the RoboVac in areas with open flames or flammable materials.
- Manteña o cabelo, a roupa solta, os dedos e todas as partes do corpo lonxe das aberturas e das partes móbiles.
- Use só como se describe neste manual.
- Non o use sen o colector de po e/ou os filtros colocados.
- Non permita que os nenos xoguen co aparello.
- Only use the power adapter supplied by the manufacturer.
- Do not use the appliance to pick up large debris, liquids, or sharp objects.
Contido do paquete
- 1 x eufy BoostIQ RoboVac 11S (Slim)
- 1 x Remote control (AAA batteries included)
- 1 x Charging Base & Power Adapter
- 1 x Ferramenta de limpeza
- 2 x Side Brushes (additional pair)
- 1 x Filter Set (additional set)
- 1 x Manual de usuario
- 1 x Guía de inicio rápido
- 1 x Información da garantía
Configuración
1. Prepare the RoboVac
- Remove all protective films and stickers from the RoboVac and charging base.
- Attach the side brushes by pressing them onto the square posts until they click.
2. Install the Charging Base
Place the charging base on a hard, level surface against a wall. Ensure there is at least 3 feet (1 meter) of clear space to either side and 6 feet (2 meters) in front of the charging base. Connect the power adapter to the charging base and a wall outlet. The indicator light on the charging base will illuminate.
Image: RoboVac automatically returning to its charging base.
3. Cargo inicial
Place the RoboVac onto the charging base, ensuring the charging pins align. For first-time use, charge the RoboVac for at least 12 hours. The indicator light on the RoboVac will breathe orange while charging and turn solid blue when fully charged.
Operating Your RoboVac
1. Acendido/apagado
Press and hold the power button on the RoboVac for 3 seconds to turn it on or off. The indicator light will turn blue when on.
2. Modos de limpeza
The RoboVac offers several cleaning modes, selectable via the remote control:
- Limpeza automática: The RoboVac cleans automatically using various cleaning patterns. This is the default mode.
- Limpeza de manchas: For concentrated cleaning of a specific area. The RoboVac will clean in a spiral pattern for approximately 2 minutes.
- Limpeza de bordes: The RoboVac cleans along walls and furniture edges.
- Limpeza de habitación individual: The RoboVac cleans a single room and then returns to its charging base.
Image: Remote control for selecting cleaning modes and scheduling.
3. Tecnoloxía BoostIQ
The RoboVac automatically increases suction power when extra vacuuming strength is needed, such as when transitioning from hard floors to carpets. This feature activates in approximately 1.5 seconds.
Image: RoboVac activating BoostIQ for increased suction on carpet.
4. Programación
Use the remote control to set a cleaning schedule for your RoboVac. Refer to the remote control section in the full manual for detailed instructions on setting schedules.
Mantemento
Regular maintenance ensures optimal performance of your RoboVac.
1. Baleirar o colector de po
Empty the dust bin after each use. Press the dust bin release button and pull out the bin. Open the dust bin cover and discard debris.
Image: The dust bin removed from the RoboVac, showing collected debris.
2. Limpeza dos filtros
Remove the filters from the dust bin. Tap them to remove dust and rinse them under running water. Allow filters to air dry completely before reinstalling. Replace filters every 3-6 months, or as needed.
Image: Diagram illustrating the multi-layer filter system of the RoboVac.
3. Cleaning the Rolling Brush and Side Brushes
Remove the rolling brush cover and lift out the rolling brush. Use the cleaning tool to remove hair and debris. Clean the side brushes by pulling them off and removing any tangled hair or debris. Replace worn side brushes.
4. Cleaning the Sensors and Charging Contacts
Wipe the drop sensors, charging contacts, and swivel wheel with a dry cloth to maintain proper function.
Resolución de problemas
| Problema | Solución |
|---|---|
| RoboVac does not turn on. | Ensure the power switch is on. Charge the RoboVac for at least 12 hours. |
| RoboVac does not charge. | Check that the charging base is powered on. Clean the charging contacts on both the RoboVac and the base. |
| RoboVac gets stuck frequently. | Clear obstacles like cables, rugs, or furniture that may impede movement. Use boundary strips if necessary. |
| A potencia de succión é débil. | Empty the dust bin. Clean or replace the filters. Clean the rolling brush. |
| RoboVac falls down stairs. | Clean the drop sensors. Ensure the RoboVac is not operating on dark-colored carpets near edges, which can interfere with sensors. |
Especificacións
| Característica | Detalle |
|---|---|
| Marca | eufy |
| Nome do modelo | eufy 11S |
| Número de modelo | T2108 |
| Características especiais | Quiet, Self-Charging, Super-Thin |
| Cor | Negro |
| Dimensións do produto | 12.79 cm de longo x 2.85 cm de ancho x 12.79 cm de alto |
| Tipo de filtro | Lavable |
| Duración da batería | minutos 100 |
| Voltage | 240 voltios |
| Capacidade (depósito de po) | 600 mililitros |
| Fonte de enerxía | Alimentado por batería |
| Método de control | Mando a distancia |
| Peso do elemento | 6.34 libras |
| Uso específico | Carpet, Dual Action, Hard Floor |
Garantía e Soporte
Your eufy BoostIQ RoboVac 11S (Slim) comes with a 12 meses de garantía. For technical support, warranty claims, or additional information, please refer to the warranty information card included in your package or visit the official eufy support websitio.
