1. Introdución
The TechCare Plus 24 Massager is an advanced TENS (Transcutaneous Electrical Nerve Stimulation) and PMS (Powered Muscle Stimulator) device designed to provide effective, drug-free pain relief and muscle stimulation. Utilizing low-voltage pulses, it targets nerve fibers to block pain signals and promote the body's natural pain relievers. This manual provides comprehensive instructions for safe and effective use of your device.
Image: The TechCare Plus 24 Massager with its various components, including the main unit, electrode pads, and cables.
2. Información de seguridade
Please read and understand all safety warnings before using the TechCare Plus 24 Massager.
- Consult with a physician before use if pregnant, suffering from epilepsy, or have a serious health condition.
- Do not use this product if you have a heart condition or pacemaker.
- As declaracións sobre suplementos dietéticos non foron avaliadas pola FDA e non están destinadas a diagnosticar, tratar, curar ou previr ningunha enfermidade ou condición de saúde.
- Manter fóra do alcance dos nenos.
- Do not apply pads over open wounds, rashes, or inflamed skin.
- Evite usar o dispositivo mentres conduce ou manexa maquinaria pesada.
3. Que está incluído
Your TechCare Plus 24 Massager package includes the following items:
- 1x Newest Model Controller (TechCare Plus 24 Device)
- 1x Hard Cover Travel Case
- 6x Large Electrodes (Pads)
- 2x Electrodes Cables
- 1x Manual do usuario
- 1x USB Cable and Wall Charger
- 1x Small Electrode Pad and Wire Holder
- 1x Treatment Points Chart
Imaxe: Un remate completoview of all items included in the TechCare Plus 24 Massager package.
Image: The hard cover travel case opened, displaying the organized storage for the device and its accessories.
4. Instrucións de configuración
Follow these steps to set up your TechCare Plus 24 Massager for first use:
- Cargar o dispositivo: Before initial use, fully charge your device for 10 hours using the provided USB cable and wall charger. The battery indicator on the screen will show charging status.
- Connect Pads to Cables: Snap the electrode pads onto the ends of the electrode cables. Ensure a secure connection.
- Plug Cables into Device: Insert the jack end of the electrode cables into the A and/or B output ports on the top of the device.
- Aplicar as almofadas ao corpo: Remove the protective film from the electrode pads and place them on the desired treatment area on your body. Ensure pads are at least 1 inch apart and stick well to clean, dry skin.
Image: The device connected to its charging cable, illustrating the charging process.
Setup Video Tutorial
Video: A step-by-step guide on how to set up your TechCare Plus 24 Massager, including charging, connecting pads, and applying them to the body.
5. Instrucións de funcionamento
Once set up, follow these steps to operate your TechCare Plus 24 Massager:
- Activar: Switch down the button on the upper left side of the device to turn it on. The screen will illuminate.
- Seleccione o modo de masaxe: Press the "M" button to cycle through the multi-preprogrammed massage modes (Tapping, Acupuncture, Deep Tissue, Foot, Cupping, Combo, Kneading, Swedish, Scrapping, Reflexology, Tai-Chi). Please note that the intensity level will reset to level 1 after changing the massage mode.
- Establecer hora: Press the "T" button to adjust the desired treatment time, ranging from 10 to 60 minutes.
- Axustar a intensidade: Use the "+" and "-" buttons to increase or decrease the intensity level to your desired comfort. There are 20 intensity bars.
- Lock/Unlock Device: To lock the device and prevent accidental changes during treatment, long press the "T" button for approximately 3 seconds. To unlock, long press the "T" button again.
Image: The TechCare Plus 24 device highlighting the power switch, mode, timer, and intensity buttons, along with the USB charging port and A/B output channels.
Dual Channel (A/B) Operation
The TechCare Plus 24 features dual output channels (A and B), allowing you to use different modes or intensities on two separate areas of the body simultaneously, or to treat a larger area more effectively.
- Plug Both Jacks: Ensure both electrode cables are securely plugged into the A and B output ports on the device.
- Control independente: Channel A and Channel B can be operated separately. Press the round center button to switch between controlling Channel A and Channel B. You can then adjust the mode and intensity for each channel independently.
Image: The TechCare Plus 24 device with electrode pads connected to both A and B channels, demonstrating its dual-channel capability.
6. Características do produto
- Multi-preprogrammed massage modes: Tapping, Acupuncture, Deep Tissue, Foot, Cupping, Combo, Kneading, Swedish, Scrapping, Reflexology, Tai-Chi.
- Adjustable 10 to 60 minutes timer.
- Rechargeable internal lithium battery providing up to 20 hours of continuous use.
- A-B Dual Output allows for two separate users or treatment areas.
- Comes with a durable hard cover travel case for protection.
7. Especificacións
| Especificación | Detalle |
|---|---|
| Dimensións do produto | 4 x 2 x 7 polgadas |
| Peso do elemento | 1.5 libras |
| Número de modelo do artigo | DP01 |
| Baterías | Requírese 1 batería de polímero de litio (incluída) |
| Fonte de enerxía | Alimentado por batería |
| Material | Plástico |
| Fabricante | Masaxeiro TechCare |
Image: Visual representation of the TechCare Plus 24 device with its dimensions indicated.
8. Coidados e mantemento
- Store the device and pads in the provided travel case when not in use to protect them from dust and damage.
- Clean the device with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
- The electrode pads are reusable but will lose their adhesiveness over time. Replace pads when they no longer stick well to ensure effective treatment.
- Ensure the device is fully charged before long periods of storage to maintain battery health.
9 Solución de problemas
If you encounter issues with your TechCare Plus 24 Massager, please refer to the following common troubleshooting tips:
- Sen enerxía: Ensure the device is fully charged. Check the charging cable and adapter for damage.
- No Sensation/Weak Sensation: Verify that the electrode pads are securely connected to the cables and the cables are firmly plugged into the device. Ensure the pads are making good contact with your skin and are not worn out. Increase the intensity level using the "+" button.
- Almofadas que non se pegan: Clean the skin area where pads are applied. Ensure pads are clean and free of debris. Replace old pads with new ones if adhesiveness is lost.
- Device Locked: If the device is unresponsive, you may have accidentally activated the lock function. Long press the "T" button for approximately 3 seconds to unlock it.
If problems persist, please contact TechCare Massager customer support for assistance.
10. Garantía e soporte
The TechCare Plus 24 Massager comes with a lifetime limited warranty. For warranty claims, technical support, or any inquiries regarding your device, please contact TechCare Massager customer service.
You can find more information and contact details on the official TechCare Massager websitio: techcaremassager.com
