Link2Home EM-BL268B LED Battery Operated Security Floodlight User Manual

Información importante de seguridade

Please read and understand all instructions before installing and operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause injury or property damage.

• Asegúrate de que a superficie de montaxe sexa estruturalmente sólida e poida soportar o peso da luminaria.
• Non mesture pilas vellas e novas. Non mesture pilas alcalinas, estándar (carbón-zinc) ou recargables (níquel-cadmio).
• Despeje as pilas correctamente segundo a normativa local.
• This product is designed for outdoor use. Ensure all seals and covers are properly secured to maintain water resistance.
• Non mire directamente á fonte de luz LED cando estea acesa.
• Manter fóra do alcance dos nenos.

Contido do paquete

Verifique que estean presentes todos os compoñentes antes de comezar a instalación.

• 1x Link2Home EM-BL268B Dual-Head Sensor Floodlight
• Ferraxes de montaxe (tornillos, ancoraxes de parede)
• Batteries (as specified)
• Manual de instrucións

Imaxe: Fronte view of the Link2Home EM-BL268B Dual-Head Sensor Floodlight, showing the two adjustable light heads and the motion sensor below.

Características do produto

The Link2Home EM-BL268B floodlight offers advanced features for reliable outdoor security lighting.

• 330 Lumen LED Output: Provides bright illumination for security and visibility.
• Funciona con pilas: Cordless design for flexible installation without wiring.
• Adjustable Dual-Heads: Two light heads can be independently adjusted to cover desired areas.
• 140° Motion Sensor: Detects movement up to 40 feet away.
• Photocell Technology: Ensures the light only activates in low-light conditions to conserve battery life.
• Resistente á auga: Deseñado para uso no exterior en diversas condicións meteorolóxicas.
• Adjustable Run Time: Light duration can be set from 3 seconds to 7 minutes after motion detection.

Image: The Link2Home EM-BL268B floodlight with icons highlighting its key features: 140° motion sensor (max 40 ft), 330 lumens, water resistance, 2 lux light sensitivity, and adjustable run time (3s-7mins).

Configuración e instalación

1. Instalación da batería

1. Locate the battery compartment on the back or bottom of the floodlight unit.
2. Abra a tapa do compartimento.
3. Insert the required batteries (typically 4x D-cell, refer to product packaging for exact type) ensuring correct polarity (+/-).
4. Securely close the battery compartment cover to maintain water resistance.

2. Montaxe do Floodlight

The floodlight is designed for flush mount installation on a wall or other flat surface.

1. Choose a suitable mounting location that provides the desired coverage and is within the motion sensor's range. Ensure the surface is stable.
2. Use the mounting bracket (if separate) or the base of the unit as a template to mark the drill holes on the wall.
3. Fai buratos guía nos lugares marcados. Insire ancoraxes de parede se o montas en cartón xeso ou albanelería.
4. Align the floodlight with the holes and secure it using the provided screws. Do not overtighten.

Imaxe: Lateral view of the Link2Home EM-BL268B floodlight, illustrating the mounting base and the adjustable light heads.

3. Adjusting Light Heads and Sensor

Once mounted, adjust the light heads and sensor for optimal performance.

• Light Heads: Manually pivot each light head up, down, and sideways to direct the light beam to your desired area.
• Sensor de movemento: The motion sensor is typically located at the bottom of the unit. It can often be tilted or rotated to adjust its detection angle.
• Settings Dials: Look for small dials on the sensor unit. These typically control:
  • HORA: Adjusts how long the light stays on after motion is detected (e.g., 3 seconds to 7 minutes).
  • LUX/DAYLIGHT: Adjusts the ambient light level at which the sensor becomes active. Set to a lower LUX for activation only in darker conditions, or higher for activation in brighter conditions.
  • SENSITIVITY/RANGE: Adjusts the detection range of the motion sensor (up to 40 feet).

Image: The Link2Home EM-BL268B floodlight from an angle, highlighting the adjustable light heads and the motion sensor with its control dials.

Instrucións de funcionamento

The Link2Home EM-BL268B floodlight operates automatically based on its sensor settings.

• Activación automática: Once batteries are installed and settings are configured, the floodlight will automatically turn on when motion is detected within its range, provided the ambient light level is below the set LUX threshold.
• Duración: The light will remain on for the duration set by the TIME dial. If motion is continuously detected, the light will reset its timer and stay on until no motion is detected for the set period.
• Función fotocélula: The integrated photocell prevents the light from activating during daylight hours, conserving battery power. The light will only become active when the surrounding light level drops sufficiently (as determined by the LUX setting).

Image: The Link2Home EM-BL268B floodlight mounted on a brick wall during the day, demonstrating its inactive state due to sufficient ambient light.

Image: The Link2Home EM-BL268B floodlight mounted on a brick wall at night, showing its bright illumination when activated by motion in low-light conditions.

Mantemento

• Substitución da batería: When the light output becomes dim or the unit stops activating, it is time to replace the batteries. Follow the battery installation steps in the Setup section. Always replace all batteries at once with new ones of the same type.
• Limpeza: Limpe periodicamente a luminaria e a lente do sensor cun pano suave eamp cloth to remove dirt, dust, or debris. Do not use abrasive cleaners or solvents. Ensure the sensor lens is clear for optimal detection.
• Inspección: Regularly check the mounting screws and the fixture for any signs of wear or damage.

Resolución de problemas

Especificacións

• Modelo: EM-BL268B
• Marca: Ligazón2Home
• Fonte de luz: LED
• Saída de lumens: 330 lúmenes
• Fonte de enerxía: Battery Powered (e.g., 4x D-cell, 6 Volts total)
• Wattage: 1.5 vatios
• Motion Sensor Detection Angle: 140°
• Motion Sensor Detection Range: Ata 40 pés (12 metros)
• Adjustable Run Time: 3 segundos a 7 minutos
• Photocell Activation: Approx. 2 Lux
• Uso interior/exterior: Ao aire libre
• Tipo de instalación: Montar a lavar
• Cor: Negro
• Dimensións do produto (LxWxH): 16.51 x 14.48 x 16.51 cm (6.5 x 5.7 x 6.5 polgadas)
• Peso do artigo: 535 g (1.18 lb)

Garantía e Soporte

This Link2Home product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Link2Home websitio web para obter información detallada sobre os termos e condicións da garantía.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Link2Home customer service. Contact information can typically be found on the product packaging or the official brand websitio.

Websitio: www.link2home.com (Example, verify actual websitio)