Manual do usuario da placa de desenvolvemento FPGA Digilent Arty A7-100T Artix-7

1. Introdución

The Digilent Arty A7-100T is a versatile Field Programmable Gate Array (FPGA) development board designed for makers and hobbyists. It features the Xilinx Artix-7 XC7A100TCSG324-1 FPGA, offering a powerful platform for digital circuit design, embedded systems development, and various custom hardware projects. This manual provides essential information for setting up, operating, and maintaining your Arty A7-100T board.

Figure 1: Digilent Arty A7-100T FPGA Development Board and its retail packaging.

2. Características clave

The Arty A7-100T board is equipped with a range of features to support diverse development needs:

• FPGA: Xilinx Artix-7 XC7A100TCSG324-1.
• Velocidade do reloxo: Internal clock speeds exceeding 450MHz.
• Analog-to-Digital Converter: On-chip XADC.
• Programación: Programmable over JTAG and Quad-SPI Flash.
• Memoria: 256MB DDR3L with a 16-bit bus @ 667MHz, 16MB Quad-SPI Flash.
• Conectividade: 10/100 Mbps Ethernet, USB-UART Bridge.
• Potencia: Powered from USB or any 7V-15V source.
• Interfaces de usuario: 4 Switches, 4 Buttons, 1 Reset Button, 4 LEDs, 4 RGB LEDs.
• Ampliación: 4 Pmod connectors, shield connector.

Figura 2: De arriba abaixo view of the Arty A7-100T board, highlighting the Artix-7 FPGA, Ethernet port, and various user I/O components.

3. Guía de configuración

Follow these steps to set up your Arty A7-100T development board:

1. Conexión de alimentación:

   The Arty A7-100T can be powered via the USB port or an external 7V-15V DC power supply connected to the barrel jack. For initial setup and programming, connecting via USB is typically sufficient.

   

   Figura 3: En ángulo view of the Arty A7-100T, showing the USB port and DC barrel jack for power input.

2. Conexión USB:

   Connect the Arty A7-100T to your computer using a USB cable. This connection provides power, enables USB-JTAG programming, and facilitates communication via the USB-UART bridge.
3. Instalación de software:

   Install the Xilinx Vivado Design Suite (WebPack edition is suitable for this board) on your computer. This software is required for developing, synthesizing, and programming your FPGA designs. Refer to the official Xilinx documentation for detailed installation instructions.

4. Instalación de controladores:

   Ensure that the necessary USB drivers for the Digilent board are installed. These are typically included with the Vivado installation or can be downloaded from the Digilent websitio.

4. Instrucións de funcionamento

Operating the Arty A7-100T involves creating and deploying FPGA designs. Here's a general workflow:

1. Creación do proxecto:

   Start a new project in Xilinx Vivado. Select the correct FPGA part: XC7A100TCSG324-1 (or XC7A35TICSG324-1L if you have the 35T variant).

2. Design Entry:

   Write your hardware description language (HDL) code (VHDL or Verilog) for your desired functionality. This could involve implementing custom logic, a soft-core processor like MicroBlaze, or interfacing with peripherals.
3. Restricción Files (XDC):

   Add Xilinx Design Constraint (XDC) files to map your design's I/O ports to the physical pins on the Arty A7-100T board. Digilent provides master XDC files for the Arty A7 on their website, which serve as a good starting point.

4. Synthesis and Implementation:

   Run synthesis and implementation in Vivado. This process translates your HDL code into a netlist, maps it to the FPGA's resources, and generates the bitstream file.

5. Bitstream Generation:

   After successful implementation, generate the bitstream (.bit) file. Isto file contains the configuration data for the FPGA.
6. Programming the FPGA:

   Use the Vivado Hardware Manager to connect to your Arty A7-100T board via the USB-JTAG interface. Program the FPGA with your generated bitstream. You can also program the Quad-SPI Flash for persistent storage of your design.

7. Probas e depuración:

   Test your design using the onboard switches, buttons, and LEDs, or by connecting external Pmod modules. Utilize Vivado's debugging tools, such as the Integrated Logic Analyzer (ILA), for verifying internal signals.

5. Mantemento

Proper care and maintenance will ensure the longevity and reliable operation of your Arty A7-100T board:

• Manexo: Always handle the board by its edges to avoid touching sensitive components.
• Descarga estática: Take precautions against electrostatic discharge (ESD) when handling the board. Use an anti-static wrist strap and work on an ESD-safe surface.
• Limpeza: Keep the board clean and free from dust and debris. Use compressed air or a soft brush for cleaning. Avoid using liquids directly on the board.
• Almacenamento: Store the board in an anti-static bag when not in use, in a dry environment away from extreme temperatures.
• Fonte de alimentación: Use only recommended power supplies (USB or 7V-15V DC). Incorrect voltagPodemos danar a placa.

Figura 4: Abaixo view of the Arty A7-100T board, showing solder points and regulatory markings.

6 Solución de problemas

If you encounter issues with your Arty A7-100T, consider the following troubleshooting steps:

• Indicador de potencia: Check if the power LED (LD1) is illuminated when the board is connected to power. If not, verify your power source and connections.
• Problemas de conexión USB: If your computer does not recognize the board, ensure USB drivers are correctly installed. Try a different USB port or cable.
• Erros de programación:
  • Verify that the correct FPGA part (XC7A100TCSG324-1) is selected in your Vivado project.
  • Ensure the JTAG chain is correctly detected in Vivado Hardware Manager.
  • Check for any error messages in the Vivado console.
• Design Functionality:
  • Double-check your HDL code for syntax or logical errors.
  • Review your XDC constraints to ensure correct pin assignments.
  • Use Vivado's simulation tools to verify your design logic before programming the FPGA.
  • Utilize the Integrated Logic Analyzer (ILA) for on-chip debugging of your running design.
• Periféricos externos: If using Pmod connectors, ensure they are correctly connected and compatible with the Arty A7's voltage levels and pin assignments.

7. Especificacións

8. Garantía e soporte

The Digilent Arty A7-100T is manufactured by Digilent. For detailed warranty information, technical support, and additional resources such as schematics, reference manuals, and example projects, please visit the official Digilent websitio.

Visit Digilent's Official Websitio