Manual de instrucións do timbre sen fíos AVANTEK CW-11

1. Introdución

Thank you for choosing the AVANTEK CW-11 Wireless Doorbell. This manual provides essential information for the proper installation, operation, and maintenance of your new doorbell system. Please read these instructions carefully before use and retain them for future reference.

Image 1.1: AVANTEK CW-11 Wireless Doorbell system, showing the compact transmitter and receiver units.

2. Información de seguridade

• Non expoña o dispositivo a temperaturas extremas nin á luz solar directa.
• Keep the device away from water and high humidity. The transmitter is IP55 waterproof, but the receiver is for indoor use only.
• Non intente desmontar ou reparar o dispositivo vostede mesmo. Póñase en contacto co servizo de atención ao cliente para obter asistencia.
• Manteña as baterías fóra do alcance dos nenos. Desfágase das baterías usadas de forma axeitada.

3. Contido do paquete

• 1 x Wireless Transmitter (Doorbell Button)
• 1 x Plug-in Receiver (Chime Unit)
• 1 x CR2 Battery (pre-installed in transmitter)
• 2 x Parafusos
• 2 x áncoras
• 1 x cinta adhesiva de dobre cara
• 1 x Desaparafusador

4. Produto rematadoview

The AVANTEK CW-11 Wireless Doorbell system consists of a battery-powered transmitter (doorbell button) and a plug-in receiver (chime unit). The receiver features 52 selectable melodies, 5 adjustable volume levels, and an LED indicator for visual alerts.

Image 4.1: The receiver unit, illustrating its features including 52 chimes, 5 volume levels, and an LED indicator.

Image 4.2: The compact size of both the transmitter and receiver, designed to not obstruct adjacent power sockets.

5. Instrucións de configuración

5.1 Installing the Transmitter

The transmitter can be installed using either the provided double-sided adhesive tape or screws and anchor plugs.

Image 5.1: Visual guide for installing the transmitter using either adhesive tape or screws and anchor plugs.

Method A: Using Double-Sided Adhesive Tape

1. Limpe ben a superficie de montaxe desexada para garantir que estea libre de po e humidade.
2. Peel off one side of the protective film from the double-sided adhesive tape and attach it to the back of the transmitter.
3. Peel off the other side of the protective film and firmly press the transmitter onto the cleaned surface for at least 30 seconds.

Method B: Using Screws and Anchor Plugs

1. Mark the desired mounting points for the transmitter on the wall.
2. Drill two holes at the marked positions.
3. Insert the anchor plugs into the drilled holes.
4. Align the transmitter's mounting holes with the anchor plugs and secure it with the provided screws.

Importante: To prevent signal interference, do not install the transmitter close to or on metal surfaces such as metal door frames or mailboxes.

5.2 Plugging in the Receiver

Plug the receiver into a standard electrical outlet in a location where the chime can be easily heard. The LED on the receiver will flash upon initial power-up.

5.3 Pairing the Doorbell System

The transmitter and receiver are pre-paired at the factory. If re-pairing is needed or if you add additional transmitters/receivers, follow these steps:

1. Conecte o receptor a unha toma de corrente.
2. Para entrar no modo de emparellamento, manteña premido o botón de volume do receptor durante 3 segundos. O LED do receptor parpadeará.
3. Remove the battery insulating film from the transmitter (if not already done).
4. Prema o botón pulsador do transmisor. O seu LED parpadeará.
5. Despois do emparellamento correcto, o receptor soará unha vez e os LED do receptor e do transmisor parpadearán simultaneamente.

6. Instrucións de funcionamento

6.1 Changing Melodies

The receiver offers 52 different melodies. Use the 'Next' and 'Previous' buttons on the side of the receiver to cycle through the available tunes. Press the doorbell button to preview the selected melody.

Image 6.1: The receiver offers a wide selection of melodies for personalization.

6.2 Axuste do volume

There are 5 adjustable volume levels, with a maximum setting of 115 dB. Use the 'Volume' button on the side of the receiver to increase or decrease the sound level.

6.3 Modo de silencio

To activate mute mode (0 dB), repeatedly press the 'Volume' button until the sound is off. In this mode, only the LED indicator will flash when the doorbell is pressed, providing a silent visual alert.

Image 6.2: The mute mode feature allows for silent notifications, ideal for quiet environments.

7. Mantemento

7.1 Limpeza

Limpe os dispositivos cun pano suave e seco. Non empregue produtos de limpeza abrasivos nin solventes.

7.2 Substitución da batería (transmisor)

The transmitter uses a CR2 battery with an estimated lifespan of 3 years. When the battery is low, the transmitter's LED may not light up or the signal range may decrease. To replace the battery:

1. Abra con coidado o transmisor casing using the provided screwdriver or a small flat-head screwdriver.
2. Retire a antiga batería CR2.
3. Introduza unha nova pila CR2, asegurándose de manter a polaridade correcta (+/-).
4. Pecha o casing de forma segura.

8 Solución de problemas

• Doorbell not chiming: Ensure the receiver is plugged in and powered. Check the transmitter battery. Re-pair the devices if necessary (refer to Section 5.3).
• Short signal range: Ensure the transmitter is not installed on or near metal surfaces. Relocate the receiver to a more central position. Replace the transmitter battery.
• Interferencia: The doorbell operates on a frequency that minimizes interference with other household devices. If interference occurs, try changing the melody or relocating the receiver.
• Función de memoria: The device remembers your last melody and volume level after a power outage, so no need to reset settings.

9. Especificacións

10. Garantía e soporte

For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official AVANTEK websitio. Garde o recibo da compra como xustificante da mesma.