FEIT Electric BPMR16/GU10/930CA MR16 LED Bulb User Manual

1. Introdución

Thank you for choosing the FEIT Electric BPMR16/GU10/930CA MR16 LED Bulb. This manual provides essential information for the safe installation, operation, and maintenance of your new LED bulb. Please read these instructions carefully before use and retain them for future reference.

This MR16 LED bulb is designed for various lighting applications, offering energy efficiency and a long lifespan. It features instant full brightness and is suitable for damp localizacións.

Image: The FEIT Electric BPMR16/GU10/930CA MR16 LED Bulb, showcasing its compact design and GU10 base.

2. Información de seguridade

Always follow basic safety precautions when installing or replacing light bulbs to reduce the risk of fire, electric shock, or personal injury.

• AVISO: Risco de descarga eléctrica. Non abrir. Non contén pezas que o usuario poida reparar.
• Apague a alimentación antes da inspección, instalación ou eliminación.
• Do not use where directly exposed to water. Suitable for damp localizacións.
• Este dispositivo non está pensado para o seu uso con saídas de emerxencia ou luces de emerxencia.
• Do not use with standard dimmers unless specifically stated as dimmable. This bulb is dimmable. Ensure your dimmer is compatible with LED technology.
• Non instale a lámpada coas mans molladas ou cando estea de pé sobre mollada ou damp superficies.
• Ensure the bulb is securely fastened in the fixture.

3. Configuración e instalación

This LED bulb is designed for easy installation into compatible GU10 base fixtures.

1. Apagar a enerxía: Antes de tentar calquera instalación, asegúrese de que a alimentación da lámpada estea completamente desconectada no disyuntor ou na caixa de fusibles.
2. Eliminar a lámpada antiga: Allow the old bulb to cool completely before carefully removing it from the fixture. For GU10 bulbs, typically push up and twist counter-clockwise to unlock and remove.
3. Instalar a nova lámpada: Align the two pins of the FEIT Electric BPMR16/GU10/930CA LED bulb with the holes in the GU10 socket. Push the bulb firmly into the socket and twist clockwise until it locks into place.
4. Restaurar enerxía: Unha vez instalada a lámpada de forma segura, restableza a alimentación da luminaria no disyuntor.
5. Proba: Acenda o interruptor da luz para confirmar que a lámpada funciona correctamente.

If the bulb does not light up, ensure it is properly seated in the socket and that power is restored to the fixture.

4. Instrucións de funcionamento

The FEIT Electric BPMR16/GU10/930CA LED Bulb operates like a standard light bulb once installed.

• Activar/Desactivar: Use the existing light switch connected to your fixture to turn the bulb on or off. The bulb will instantly turn on to full brightness.
• Adormecer: This bulb is dimmable. If your fixture is connected to a compatible LED dimmer switch, you can adjust the light output. Ensure your dimmer is specifically designed for LED bulbs to avoid flickering or performance issues.
• Entorno de uso: This bulb is suitable for both indoor and outdoor use, including damp lugares. Evitar a exposición directa á auga.

5. Mantemento

The FEIT Electric BPMR16/GU10/930CA LED Bulb requires minimal maintenance.

• Limpeza: Before cleaning, ensure the power to the fixture is turned off and the bulb has cooled. Wipe the bulb with a soft, dry cloth. Do not use liquid or abrasive cleaners.
• Substitución: With an average life of 25,000 hours, this LED bulb is designed for long-term use. When replacement is eventually needed, follow the installation steps in Section 3.

6 Solución de problemas

If you encounter issues with your FEIT Electric LED bulb, refer to the following troubleshooting steps:

• A lámpada non se acende:
  • Asegúrese de que o interruptor de alimentación estea acendido.
  • Comprobe o interruptor ou o fusible.
  • Verify the bulb is securely seated in the GU10 socket. Turn off power, remove, and re-insert the bulb.
  • Proba a lámpada noutra luminaria que funcione para descartar un problema coa luminaria.
• Problemas de parpadeo ou atenuación:
  • Ensure your dimmer switch is compatible with LED bulbs. Older incandescent-only dimmers may cause flickering.
  • Check for loose connections in the fixture or switch.
• Bulb Emits Buzzing Noise:
  • This can sometimes occur with incompatible dimmer switches. Try using the bulb without a dimmer or with a different LED-compatible dimmer.

Se os problemas persisten despois de seguir estes pasos, póñase en contacto co servizo de atención ao cliente.

7. Especificacións

Detailed technical specifications for the FEIT Electric BPMR16/GU10/930CA MR16 LED Bulb:

8. Garantía e soporte

Garantía: The manufacturer states "No warranty." for this product. Please refer to your retailer's return policy for any initial defects.

Atención ao cliente: For further assistance or inquiries, please contact Feit Electric customer service through their official websitio web ou o vendedor onde se comprou o produto.