FrSky XSR-SIM

Manual do usuario do dongle USB FrSky Compact XSR-SIM

Model: XSR-SIM | Brand: FrSky

1. Introdución

The FrSky Compact XSR-SIM USB Dongle provides a wireless connection between your FrSky transmitter and a computer for use with flight simulators. This dongle eliminates the need for a wired connection, offering greater freedom of movement during simulator practice. It is designed to be compatible with most simulators that do not feature hardware encryption.

The device is compact and lightweight, measuring 48.2 x 19.1 x 9.2 mm (L*W*H) and weighing approximately 6.2 grams.

2. Características clave

  • Low Power Requirements: Typically consumes 55mA.
  • FrSky Transmitter Compatibility: Works with FrSky transmitters and module systems operating in D16 Mode.
  • Wide Simulator Compatibility: Compatible with popular simulators such as DRL, LiftOff, Freerider, HotProps, and others.
  • Saída da canle: Provides 8 proportional channels and 8 switch channels (configured on the transmitter).
  • Firmware actualizable: Supports firmware updates via the S.Port.
  • Plug and Play: Generally requires no additional drivers or software installation for PC.

3. Instrucións de configuración

Follow these steps to set up your FrSky XSR-SIM USB Dongle:

  1. Conectar ao ordenador: Insert the XSR-SIM USB Dongle into an available USB port on your computer. The computer should automatically recognize the device as a game controller.
  2. Instalación do controlador (se é necesario): For most PCs, the dongle is plug-and-play and does not require additional drivers. Mac users may need to download specific HID drivers. Refer to the official FrSky website for any necessary driver information.
  3. Proceso de encadernación:
    • Ensure your FrSky transmitter is powered on and set to D16 mode.
    • Locate the small binding button on the XSR-SIM dongle.
    • Press and hold the binding button while plugging the dongle into your computer's USB port. The LED indicator on the dongle will begin to flash, indicating it is in binding mode.
    • Initiate the binding procedure on your FrSky transmitter according to its specific instructions for D16 mode.
    • Once binding is successful, the LED on the XSR-SIM dongle will turn solid green. If the LED is red, binding was not successful or the dongle is not connected to a transmitter.
  4. Simulator Configuration: Open your preferred flight simulator. Navigate to the controller settings or calibration menu within the simulator and map the controls (gimbals, switches) to the corresponding channels from the XSR-SIM dongle. The dongle provides 8 proportional channels and 8 switch channels.
FrSky XSR-SIM USB Dongle, front view showing USB connector and device body.

This image displays the FrSky XSR-SIM USB Dongle, highlighting its compact design with a standard USB-A connector on one end and the main body of the dongle. The FrSky logo is visible on the device body.

FrSky XSR-SIM USB Dongle, side view.

Un lado view of the FrSky XSR-SIM USB Dongle, showing its slim profile and the USB-A connector. The device is black with subtle design elements.

4. Instrucións de funcionamento

Once the XSR-SIM dongle is successfully bound to your FrSky transmitter and configured within your simulator, operation is straightforward:

  • Encendido: Ensure your computer is on and the XSR-SIM dongle is plugged into a USB port.
  • Transmisor activado: Power on your FrSky transmitter. The dongle's LED should turn solid green, indicating a successful connection.
  • Launch Simulator: Start your flight simulator software.
  • Control: You can now use your FrSky transmitter to control the simulator wirelessly. The dongle translates the transmitter's signals into standard joystick inputs for the computer.

The dongle supports 8 proportional channels for fine control and 8 switch channels for functions like arming, mode changes, or other auxiliary controls, all configurable through your transmitter's settings.

5. Mantemento

To ensure the longevity and optimal performance of your FrSky XSR-SIM USB Dongle, observe the following maintenance guidelines:

  • Limpeza: Keep the dongle clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid liquid cleaners.
  • Almacenamento: Garde o dongle nun lugar fresco e seco, lonxe da luz solar directa e de temperaturas extremas.
  • Manexo: Manexa o dongle con coidado. Evita deixalo caer ou sometelo a impactos fortes.
  • Porto USB: Always insert and remove the dongle gently from USB ports to prevent damage to the connector.

6 Solución de problemas

If you encounter issues with your FrSky XSR-SIM USB Dongle, consider the following:

  • Fallo de vinculación:
    • Ensure your transmitter is set to FrSky D16 mode.
    • Verify that the binding button on the dongle is pressed correctly during connection to the USB port.
    • Check the LED indicator on the dongle. A solid green light indicates a successful connection. A red light or flashing light suggests a binding issue.
  • Firmware Incompatibility: If binding issues persist, it may be due to outdated firmware on either the XSR-SIM dongle or your FrSky transmitter's internal RF module. Firmware updates for the dongle are typically performed via the S.Port using your transmitter. Refer to the official FrSky websitio (www.frsky-rc.com) for specific firmware files and detailed update procedures for your transmitter model and the XSR-SIM.
  • No Recognition by Computer: Try plugging the dongle into a different USB port. Ensure your computer's operating system is up to date.
  • Simulator Not Responding: Confirm that the dongle is successfully bound (solid green LED). Check the controller settings within your simulator to ensure the XSR-SIM is selected as the input device and controls are correctly mapped.
  • Computer Sleep Issues: Some users report that the dongle may prevent the computer from entering sleep mode. If this occurs, consider using a USB hub with an on/off switch or unplugging the dongle when not in use.

7. Especificacións

ModeloXSR-SIM
MarcaFrSky
Dimensións (L*W*H)48.2 x 19.1 x 9.2 mm
Peso6.2 gramos
Consumo de enerxíaNormalmente 55 mA
Transmisores compatiblesFrSky Transmitters (D16 Mode)
Tipo de conectorUSB-A
CorNegro
Data de primeira dispoñibilidade12 de agosto de 2018

8. Garantía e soporte

For detailed warranty information, please refer to the official FrSky website or contact your point of purchase. FrSky products typically come with a limited warranty covering manufacturing defects.

Para obter asistencia técnica, actualizacións de firmware e recursos adicionais, visite a páxina oficial de FrSky. websitio: www.frsky-rc.com.

Documentos relacionados - XSR-SIM

Preview Manual de instrucións do receptor FrSky ARCHER RS: características, configuración e especificacións
Este manual ofrece instrucións detalladas para o receptor FrSky ARCHER RS ACCESS, que abarcan as súas características, especificacións, rexistro, vinculación, actualizacións de firmware OTA, procedementos de comprobación de alcance, configuracións a proba de fallos e información de cumprimento da FCC.
Preview Manual e guía de configuración do dron FrSky Rover 3 con rotores inclinables
Comprehensive manual for the FrSky Rover 3 Tilting Rotors Drone, covering safety precautions, specifications, setup, binding, flying checklist, and advanced settings. Learn how to operate and maintain your FrSky Rover 3.
Preview Manual do receptor FrSky 2.4GHz ACCST XSRF3PO
Este manual proporciona información detallada sobre o FrSky 2.4GHz ACCST XSRF3PO, incluíndo as súas funcións de máis deview, especificacións, características, software e configuración. Abarca a configuración, o estado do receptor e a compatibilidade con varios transmisores FrSky.
Preview Manual de instrucións da serie FrSky Scout VS600
Manual de instrucións para os dispositivos de transmisión de vídeo FrSky Scout da serie VS600, que detalla as especificacións, as características, a configuración manual e de script e o modo de cámara.
Preview Receptor FrSky TD R6: Manual de instrucións e especificacións
Manual de instrucións completo para o receptor RC de dobre banda FrSky TD R6 Tandem, que abrangue a introdución, máis deview, especificacións, características, rexistro, vinculación, estados dos LED, cambio de modo, actualizacións OTA, seguridade e cumprimento da FCC. Guía esencial para afeccionados a RC que usan equipos FrSky.
Preview Manual do receptor FrSky G-RX8 ACCST de 2.4 GHz
Guía completa do receptor de telemetría FrSky G-RX8 2.4GHz ACCST 8/16ch, que abrangue especificacións, características, vinculación, modos SBUS/PWM, función de altímetro e configuracións a proba de fallos.