Introdución
This manual provides detailed instructions for the installation, operation, and maintenance of your Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever. Please read all instructions carefully before beginning installation to ensure proper function and safety.
Image: The Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever, showcasing its elegant design and satin nickel finish.
Información de seguridade
AVISO: Este produto pode expoñelo a produtos químicos, incluído o chumbo, que o Estado de California sabe que causa cancro e defectos de nacemento ou outros danos reprodutivos. Para máis información vai a www.P65Warnings.ca.gov.
Always wear appropriate safety gear, such as gloves and eye protection, during installation. Keep small parts away from children.
Contido do paquete
Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:
- Conxunto de palanca exterior
- Conxunto de palanca interior
- Adjustable Latch (2-3/8" - 2-3/4" backset)
- Rounded Steel Faceplate
- Placa de folga
- Parafusos de montaxe
- Manual de instrucións
Image: All included components of the door lever set, including the lever assemblies, latch, faceplate, and strike plate.
Configuración e instalación
This door lever is designed to fit all doors 1-3/8" to 1-3/4" in thickness. The latch is adjustable for backsets of 2-3/8" or 2-3/4". Detailed installation instructions are included with your product. The following provides a general overview do proceso de instalación:
- Prepara a porta: Ensure your door has the standard bore holes for a door lever. If replacing an existing lever, remove the old hardware.
- Axustar o pestillo: If necessary, adjust the latch backset to either 2-3/8" (60mm) or 2-3/4" (70mm) to match your door's specifications. Insert the latch into the door edge, ensuring the bevel faces the door frame. Secure with screws.
- Install Exterior Lever: Place the exterior lever assembly through the door bore hole, ensuring the spindle passes through the latch mechanism.
- Install Interior Lever: Align the interior lever assembly with the exterior assembly and secure it with the provided mounting screws. Ensure the levers are horizontal and operate smoothly.
- Instalar a placa de peche: Attach the strike plate to the door frame, aligning it with the latch bolt. Secure with screws.
- Proba de funcionamento: Close the door and test the lever operation from both sides to ensure the latch retracts and extends properly.
Image: The Amazon Basics door lever installed on a white interior door, demonstrating its appearance in a typical setting.
Instrucións de funcionamento
To open the door, simply push down on the lever handle. The latch bolt will retract, allowing the door to open. Release the lever to allow the latch bolt to extend and secure the door when closed.
Mantemento
To maintain the finish and functionality of your door lever, follow these guidelines:
- Limpeza: Limpar a palanca cun pano suave, damp pano. Evite o uso de produtos de limpeza abrasivos, solventes ou produtos químicos agresivos, xa que poden danar o acabado.
- Lubricación: If the lever mechanism becomes stiff over time, apply a small amount of silicone-based lubricant to the moving parts of the latch and spindle.
- Apertura: Periodically check and tighten any loose mounting screws to ensure the lever remains securely attached to the door.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A panca está solta ou inestable. | Os parafusos de montaxe están soltos. | Aperte os parafusos de montaxe no lado interior da palanca. |
| O pestillo de retención non se retrae completamente. | Mechanism is dirty or dry; improper installation. | Clean and lubricate the latch mechanism. Recheck installation steps to ensure proper alignment. |
| A porta non pecha correctamente. | Strike plate misalignment; latch bolt not extending fully. | Adjust the strike plate on the door frame. Ensure the latch mechanism is clean and lubricated. |
Especificacións
| Característica | Detalle |
|---|---|
| Número de modelo | AB-DH504-SN |
| Material | Zinc Alloy (body), Steel (internal structure) |
| Remate | Níquel satinado |
| Compatibilidade do grosor da porta | 1-3/8" to 1-3/4" |
| Retorno de pestillo axustable | 2-3/8" (60 mm) ou 2-3/4" (70 mm) |
| Dimensións do produto | 6.65" de longo x 4.29" de ancho |
| Peso do elemento | 1.43 libras |
| Estilo | Passage (non-locking) |
| UPC | 841511121248 |
Image: A hand holding the door lever, illustrating its approximate size and dimensions (2.6 inches / 6 cm in height).
Garantía e Soporte
For warranty information or technical support, please refer to the Amazon Basics official website or contact Amazon customer service. Keep your purchase receipt for warranty claims.
