1. Produto rematadoview
Thank you for choosing the SEBSON LED Under Cabinet Light. This instruction manual provides essential information for the safe and efficient use of your new lighting product. This LED light bar is designed for versatile indoor applications, offering bright, neutral white illumination with a slim profile for discreet installation.
- Marca: SEBSON
- Modelo: S-101009 (50cm)
- Características principais: Integrated LED module, slim design (13mm high, 24mm wide), neutral white light (4000K), 700lm, 8W, 230V, IP20.
- Aplicacións: Ideal for kitchens, cabinets, shelves, and other indoor furniture.
2. Instrucións de seguridade
Lea atentamente estas instrucións de seguridade antes da instalación e o uso. O incumprimento destas instrucións pode provocar descargas eléctricas, incendios ou outros perigos.
- Seguridade eléctrica: Always disconnect the power supply before installation, maintenance, or cleaning. Installation should only be performed by qualified personnel if you are unsure about electrical wiring.
- Só para uso en interiores: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but offers no protection against water. Do not use in damp ambientes ou ao aire libre.
- Voltage: Asegúrese de que a fonte de alimentación voltage matches the product's requirement (230V).
- Non regulable: This LED light is not dimmable. Do not connect it to a dimmer switch, as this may damage the product.
- Calor: Do not cover the light bar during operation to prevent overheating.
- Danos: Do not use the product if the cable or housing is damaged.
3. Contido do paquete
Verifica que todos os compoñentes estean presentes no paquete:
- 1 x SEBSON LED Under Cabinet Light (50cm)
- 2 x parafusos de montaxe
4. Configuración e instalación
Follow these steps to install your SEBSON LED Under Cabinet Light:
- Desempaquetar: Retire coidadosamente todos os compoñentes da embalaxe.
- Escolla localización: Select a suitable, dry indoor location for mounting, such as under a kitchen cabinet, shelf, or inside a wardrobe. Ensure there is a 230V power outlet nearby.
- Marcar os puntos de perforación: Hold the LED light bar in the desired mounting position. Use a pencil to mark the locations for the two mounting screws.
- Perforación: Drill small pilot holes at the marked points. Ensure the drill bit size is appropriate for the provided screws.
- Montar a barra de luz: Align the light bar with the drilled holes and secure it firmly using the two provided screws.
- Conectar á enerxía: Plug the light bar's power cable into a standard 230V electrical outlet.
5. Instrucións de funcionamento
The SEBSON LED Under Cabinet Light is simple to operate:
- Once plugged into a 230V power outlet, use the integrated switch located on the light bar to turn the light ON or DESACTIVADO.
6. Mantemento
To ensure the longevity and optimal performance of your LED light bar, follow these maintenance guidelines:
- Limpeza: Disconnect the power supply before cleaning. Use a soft, dry, lint-free cloth to wipe the surface of the light bar. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Inspección: Periodically check the power cable and plug for any signs of damage. If damage is found, discontinue use and contact customer support.
- Non hai pezas reparables polo usuario: The LED module is integrated and not designed to be replaced by the user. Do not attempt to open or repair the light bar.
7 Solución de problemas
If you encounter issues with your LED light bar, refer to the following troubleshooting steps:
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non acende. | Sen fonte de alimentación. | Check if the power plug is securely inserted into the outlet. Test the outlet with another device to ensure it is functional. |
| O interruptor está apagado. | Ensure the integrated switch on the light bar is in the ON position. | |
| Luz parpadea. | Unstable power connection. | Ensure the power plug is firmly connected. Avoid connecting to outlets with fluctuating power. |
| Atenuador incompatible. | This light is non-dimmable. Ensure it is not connected to a dimmer switch. |
If the problem persists after attempting these solutions, please contact SEBSON customer support for further assistance.
8. Especificacións
Detailed technical specifications for the SEBSON LED Under Cabinet Light (Model S-101009):
- Marca: SEBSON
- Número de modelo: S-101009 (UNDER_LED_50)
- Dimensións (L x W x H): 50 x 2.4 x 1.35 cm
- Peso: 138 gramos
- Consumo de enerxía: 8 vatios
- Voltage: 230 voltios
- Fluxo luminoso: 700 lm
- Temperatura de cor: 4000 Kelvin (branco neutro)
- Índice de reproducción da cor (CRI): > 80 Ra
- Ángulo do feixe: 110°
- Duración media: 15,000 horas
- Clasificación IP: IP20 (só para uso en interiores)
- Material: Plástico
- Estilo de cambio: Integrated rocker switch
- Características especiais: Non regulable
- Compoñentes incluídos: 1 x LED light bar, 2 x mounting screws
9. Garantía e soporte
This SEBSON product is covered by a standard manufacturer's warranty. Please refer to the specific terms and conditions provided at the time of purchase or on the official SEBSON website for details regarding warranty duration and coverage.
For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or visit the official SEBSON website. When contacting support, please have your product model number (S-101009) and proof of purchase readily available.
