1. Introdución
The Nice WM001G Way Remote Control/Transmitter Module is a versatile device designed for the control of blinds and roller shutters. It integrates seamlessly into Nice automation systems operating at a frequency of 433 MHz with rolling-code technology. This module offers a modular control system, allowing management of Nice automations from various points within a home or office environment.
Key features include dedicated buttons for 'Up', 'Down', and 'Stop' commands, high-quality, shock-resistant materials, and refined finishes. Its compact design makes it practical for daily use.
2. Información de seguridade
- Seguridade da batería: This device uses a CR2 lithium 3V battery. Ensure correct polarity when inserting. Do not recharge, disassemble, heat, or dispose of batteries in fire. Keep batteries out of reach of children.
- Condicións ambientais: Non expoñas o dispositivo a temperaturas extremas, luz solar directa nin humidade elevada.
- Limpeza: Use un pano suave e seco para a limpeza. Non use produtos de limpeza ou disolventes abrasivos.
- Eliminación: Dispose of the device and battery according to local regulations for electronic waste.
3. Produto rematadoview
The WM001G module is part of the NiceWay system, which allows for flexible and customized control solutions. It can manage one automation in single or multi-group mode.
Image 1: Nice WM001G Way Remote Control Module. This image shows the compact, white remote control with its distinct buttons for operation.
Características principais:
- Modular Control: Designed to control 1 automation in single or multi-group mode.
- NiceWay System: Part of a system based on transmitter modules that can be integrated into various support models for tailored solutions.
- Frequency and Coding: Operates at 433.92 MHz with 52-bit Rolling Code encryption, offering over 4.5 million billion combinations for enhanced security. Features auto-learning capabilities.
- Compatibilidade: Compatible with Nice Ergo, Plano, FloR, and VeryVR systems at 433.92 MHz. (Note: Flo and Smilo systems are only compatible with WM240C and WM080G modules).
- Rango: Estimated range of 200 meters in open space and 35 meters indoors.
- Potencia: Powered by a 3V lithium battery, offering long autonomy.
4. Configuración
4.1 Instalación da batería
The WM001G module requires one CR2 lithium 3V battery (included). To install or replace the battery:
- Locate the battery compartment on the back of the module.
- Abra a tapa do compartimento.
- Insert the CR2 battery, ensuring the correct polarity (+ and - symbols).
- Pecha a tapa do compartimento da batería de forma segura.
4.2 Pairing/Configuration
To configure your new WM001G module with an existing Nice system, follow these steps. This process typically involves using an already configured remote (old remote) to transmit the code to the new module.
- Initiate Pairing on New Remote: Manteña premido o botón new WM001G module that you wish to configure for approximately 6 segundos.
- Transmit Code from Old Remote: Colle o teu already configured remote control. Press its corresponding button 3 veces, with approximately one second between each press.
- Confirm Pairing on New Remote: Manteña premido o botón new WM001G module (the same button from step 1) for approximately 2 segundos.
Repeat this procedure for each button on the new WM001G module that you wish to configure for different commands or groups.
5. Instrucións de funcionamento
The WM001G module features dedicated buttons for controlling your blinds or roller shutters:
- Botón Arriba: Press to raise the blind or roller shutter.
- Botón de abaixo: Press to lower the blind or roller shutter.
- Botón de parada: Press to halt the movement of the blind or roller shutter at any desired position.
Depending on your system configuration, the module can control a single automation or multiple automations grouped together.
6. Mantemento
6.1 Substitución da batería
When the remote control's performance diminishes or it stops responding, it is likely time to replace the battery. Refer to Section 4.1 for battery installation instructions. Always use a new CR2 lithium 3V battery.
6.2 Limpeza
To clean the WM001G module, gently wipe the surface with a soft, dry cloth. Avoid using water, cleaning sprays, or abrasive materials, as these can damage the device.
7 Solución de problemas
- O mando a distancia non responde:
- Check if the battery is correctly inserted and has sufficient charge. Replace the battery if necessary.
- Ensure the remote is within the operating range of the receiver (200m open space, 35m indoors).
- Verify that the module is properly paired with your Nice automation system. If not, follow the pairing instructions in Section 4.2.
- Difficulty during pairing:
- Ensure your old remote control is functioning correctly and transmitting a strong signal.
- Carefully follow the timing for button presses as described in Section 4.2. Precise timing is crucial for successful pairing.
- Try performing the pairing procedure closer to the receiver unit.
8. Especificacións
| Marca | BONITO |
| Modelo | WM001G |
| Cor | Branco |
| Composición da batería | Litio |
| Tipo de batería | 1 x CR2 (3V) - included |
| Frecuencia | 433.92 MHz |
| Codificación | Rolling Code 52-bit |
| Estimated Range (Open Space) | 200 metros |
| Estimated Range (Indoors) | 35 metros |
| Dimensións do produto (L x W x H) | 8.4 x 5.6 x 2.4 cm |
| Peso do produto | 20 gramos |
| ASIN | B07JJHPBMM |
9. Garantía e soporte
Warranty information for the Nice WM001G module is not available in the provided product data. For details regarding warranty coverage, terms, and conditions, please refer to the official Nice website or contact your authorized Nice dealer.
For technical support, further assistance, or to inquire about spare parts availability, please visit the official Nice support portal or contact their customer service directly.
