lightmaXX Vega 3-Way PRO Beam/WASH/FX Moving Head Scanner Instruction Manual

1. Introdución

Thank you for choosing the lightmaXX Vega 3-Way PRO Beam/WASH/FX Moving Head Scanner. This versatile lighting fixture is designed for professional stage, event, and club applications, offering dynamic beam, wash, and special effect capabilities. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

2. Instrucións de seguridade

Please read and understand all safety instructions before installing or operating this device. Failure to comply with these instructions may result in electric shock, fire, or personal injury.

• Este dispositivo é só para uso profesional.
• Asegúrese de que a fonte de alimentación voltage coincide co voltage especificado na unidade.
• Conecte sempre o dispositivo a unha toma de corrente conectada a terra.
• Disconnect from mains power before any service, cleaning, or maintenance.
• Non fagas funcionar o dispositivo se o cable de alimentación está danado.
• Evite a exposición directa dos ollos á fonte de luz.
• Ensure adequate ventilation around the unit to prevent overheating. Maintain a minimum distance of 0.5 meters from flammable materials.
• Mount the device securely using appropriate clampe cables de seguridade.
• Non abra a carcasa; no seu interior non hai pezas que o usuario poida reparar. Encargue calquera mantemento a persoal cualificado.
• Keep the device away from rain, moisture, and extreme temperatures.

3. Produto rematadoview

The lightmaXX Vega 3-Way PRO is a hybrid moving head fixture designed to deliver powerful and versatile lighting effects. It combines beam, wash, and special effect functionalities in one compact unit.

Figura 3.1: Fronte view of the lightmaXX Vega 3-Way PRO, displaying red light output.

Figura 3.2: Fronte view of the lightmaXX Vega 3-Way PRO with lights off, showing the lens array.

3.1 Panel de control e conexións

The rear of the unit features the control panel and various input/output connections for power and DMX control.

Figure 3.3: Close-up of the control panel and connection ports.

Figura 3.4: Traseira view of the lightmaXX Vega 3-Way PRO, showing DMX In/Out, Power In/Out, and fuse.

• DMX IN/OUT: Conectores XLR de 3 pinos para entrada e saída de sinal DMX.
• ENTRADA/SAÍDA DE ALIMENTACIÓN: PowerCon compatible connectors for mains power input and daisy-chaining power to other units.
• FUSIBLE: Fuse holder for circuit protection.
• Interruptor ON / OFF: Interruptor de alimentación principal da unidade.
• Visualización: LCD screen for menu navigation and settings.
• Botóns de control: UP, DOWN, ESC, ENTER for navigating the menu and adjusting settings.
• DMX/Run Indicators: LEDs indicating DMX signal presence and auto-run mode.

4. Configuración

4.1 Montaxe

The lightmaXX Vega 3-Way PRO can be mounted in various orientations (floor, truss, wall) using appropriate mounting hardware (not included). Always ensure the mounting surface or truss is capable of supporting the weight of the fixture and any additional equipment.

• Use a safety cable (not included) attached to the designated safety point on the fixture to prevent accidental drops.
• Ensure the fixture is securely fastened and balanced.
• Allow sufficient space around the fixture for ventilation and movement.

4.2 Conexión de alimentación

Connect the provided power cable to the POWER IN connector on the fixture and then to a suitable grounded power outlet. The unit supports daisy-chaining power to other fixtures using the POWER OUT connector, but ensure the total current draw does not exceed the circuit breaker's rating.

4.3 Conexión DMX

To control the fixture via DMX, connect a DMX controller to the DMX IN port using a 3-pin XLR cable. If connecting multiple DMX fixtures, daisy-chain them by connecting the DMX OUT of the first fixture to the DMX IN of the next. The last fixture in the chain should have a DMX terminator connected to its DMX OUT port to prevent signal reflection.

5. En funcionamento

5.1 Navegación polo panel de control

Use the control buttons to navigate the menu and adjust settings:

• ARRIBA ABAIXO: Scroll through menu options or increase/decrease values.
• ENTRAR: Selecciona unha opción ou confirma unha configuración.
• ESC: Go back to the previous menu or cancel an action.

5.2 Configuración do enderezo DMX

To control the fixture with a DMX controller, you must set a unique DMX start address for each unit. Refer to the DMX channel chart in your DMX controller's manual for channel assignments.

1. Preme ENTRAR para acceder ao menú principal.
2. Navigate to the 'DMX Address' or 'Address Set' option using ARRIBA/ABAIXO.
3. Preme ENTRAR para seleccionar.
4. Use ARRIBA/ABAIXO to set the desired DMX start address.
5. Preme ENTRAR to confirm and save the address.

5.3 Modos de funcionamento

The lightmaXX Vega 3-Way PRO typically offers several operating modes:

• Modo DMX: Full control over all functions via a DMX controller.
• Modo de execución automática: Pre-programmed internal light shows that run automatically. Select 'Auto Run' from the menu and choose a program.
• Modo activo de son: The fixture reacts to sound via its built-in microphone. Select 'Sound Active' from the menu.
• Modo mestre/escravo: Link multiple units together. Set one unit as 'Master' and others as 'Slave'. The slave units will mirror the master's actions.

6. Mantemento

Regular maintenance ensures the longevity and optimal performance of your lightmaXX Vega 3-Way PRO.

• Limpeza: Periodically clean the lenses and exterior housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the unit is powered off and cool before cleaning.
• Ventilación: Keep ventilation openings clear of dust and debris. Use compressed air to gently clear vents if necessary.
• Substitución de fusibles: If the unit does not power on, check the fuse. Disconnect power, unscrew the fuse holder, and replace with a fuse of the exact same type and rating (refer to specifications).
• Inspección: Inspeccione regularmente os cables de alimentación, os cables DMX e os accesorios de montaxe para detectar calquera signo de desgaste ou dano. Substitúa os compoñentes danados inmediatamente.

7 Solución de problemas

If you encounter issues with your lightmaXX Vega 3-Way PRO, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact lightmaXX customer support or your authorized dealer.

8. Especificacións

9. Garantía e soporte

For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your authorized lightmaXX dealer. If you require technical assistance or have questions not covered in this manual, please contact lightmaXX customer support or your retailer for further guidance.