Introdución
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Peerless-AV Heavy Duty Universal Projector Mount. Designed for robust performance, this mount supports projectors weighing up to 125 lbs (56.7 kg). Please read all instructions carefully before installation and retain this manual for future reference.
Información importante de seguridade
- Ensure the mounting surface can safely support the combined weight of the mount and the projector.
- Non exceda a capacidade de peso máxima de 125 lb (56.7 kg).
- Emprega as ferramentas e os accesorios axeitados para a instalación. En caso de dúbida, consulta cun profesional cualificado.
- Manteña os nenos e as mascotas afastados durante a instalación.
- Periodically check all fasteners to ensure they remain secure.
Contido do paquete
Verifique que estean presentes todos os compoñentes antes de comezar a instalación. O paquete debe conter:
- Peerless-AV Heavy Duty Universal Projector Mount assembly
- Mounting hardware kit (various screws, washers, etc.)
- Instrucións de instalación (este manual)
Note: Specific hardware may vary. Refer to the included hardware bag for exact contents.
Configuración e instalación
Follow these steps to properly install your projector mount. It is recommended to have two people for installation due to the weight and size of projectors.
Step 1: Attach Mount to Projector
- Identify the mounting holes on your projector. The Peerless-AV mount features six universal legs for compatibility with various projector patterns.
- Align the mount's legs with the projector's mounting holes. Adjust the length of the legs as needed to fit your projector.
- Secure the mount to the projector using the appropriate screws and washers from the hardware kit. Ensure all connections are tight and secure.
Figura 1: The Peerless-AV Heavy Duty Projector Mount showing its central body and four adjustable legs extending outwards. The mount is black and designed for ceiling installation, featuring multiple attachment points for various projector models. The image highlights the robust construction and the adjustability of the mounting arms.
Step 2: Install Ceiling Plate (if applicable)
If using a separate ceiling plate or extension column, install it according to its specific instructions. Ensure it is securely fastened to a structural support capable of holding the total weight.
Step 3: Mount Projector Assembly to Ceiling Plate
- Utiliza o Hook-and-Hang™ feature. This design allows you to temporarily hang the projector assembly onto the ceiling plate, providing a large landing area for easier and safer attachment.
- Once hung, secure the projector assembly to the ceiling plate using the provided bolts and nuts. Tighten all fasteners firmly to prevent any movement.
Funcionamento e axustes
The Peerless-AV Heavy Duty Projector Mount offers precise adjustments to optimize your projector's image alignment.
- Axuste de inclinación: Loosen the tilt adjustment knob(s) on the side of the mount. Adjust the projector vertically to achieve the desired tilt angle. Tighten the knob(s) to lock the position.
- Roll Adjustment: Loosen the roll adjustment knob(s). Rotate the projector slightly left or right to correct any horizontal tilt. Tighten the knob(s) to lock the position.
- Axuste de xiro: Loosen the swivel mechanism. Rotate the entire projector assembly horizontally to align the image with your screen. Tighten the mechanism to lock the position.
All tilt, roll, and swivel features are lockable to prevent unintended shifts in image alignment.
Mantemento
- Limpeza: Limpa o soporte cun pano suave e seco. Non empregues produtos de limpeza abrasivos nin solventes.
- Inspección periódica: Regularly check all mounting screws and adjustment knobs to ensure they are tight and secure. Over time, vibrations or environmental factors can cause fasteners to loosen.
- Capacidade de peso: Do not place additional weight on the projector or mount beyond its specified capacity.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Projector image is crooked. | Roll or tilt adjustment not properly set or locked. | Adjust the roll and tilt mechanisms as described in the "Operating and Adjustments" section and ensure they are locked. |
| A montaxe parece inestable. | Loose fasteners or improper installation. | Verify all screws and bolts connecting the mount to the projector and the ceiling are securely tightened. Ensure the ceiling structure is adequate. |
| Cannot achieve desired image position. | Adjustment limits reached or incorrect initial placement. | Review the projector's manual for its lens shift capabilities. Re-evaluate the mount's position if adjustments are insufficient. |
Especificacións
- Modelo: PRG-UNV (Heavy Duty Universal Projector Mount)
- Marca: Peerless-AV
- Capacidade máxima de peso: 125 libras (56.7 kg)
- Dimensións do produto: 20.2 x 18.1 x 4.4 polgadas (51.3 x 46.0 x 11.2 cm)
- Peso do artigo: 10.7 libras (4.85 kg)
- Cor: Negro
- Tipo de montaxe: Montaxe no teito
- Axustes: Tilt, Roll, Swivel (all lockable)
- Compatibilidade universal: Six adjustable legs for various projector mounting patterns
Información da garantía
Peerless-AV products are designed and manufactured to the highest quality standards. For specific warranty details regarding your Heavy Duty Universal Projector Mount, please refer to the warranty card included with your product or visit the official Peerless-AV websitio.
Atención ao cliente
If you encounter any issues or have questions regarding the installation or operation of your Peerless-AV Heavy Duty Projector Mount, please contact Peerless-AV customer support.
- Websitio: www.peerless-av.com
- Teléfono: Refer to the Peerless-AV websitio para os números de contacto rexionais.
