DieHard DH137 10 Amp Battery Charger / Maintainer User Manual

Introdución

The DieHard DH137 is a 10A 12V battery charger designed for use with standard, AGM, and Gel batteries. This device is engineered to monitor and maintain the battery's charge level, automatically resuming charging if the battery's voltage drops. Key features include reverse hook-up protection, multi-stage charging for enhanced precision and safety, and extended battery life. It comes equipped with 50 Amp clamps suitable for both top-mount and side-mount battery posts.

Información importante de seguridade

Lea e comprenda sempre todos os avisos e instrucións de seguridade antes de usar este produto. O incumprimento destas instrucións pode provocar descargas eléctricas, incendios ou lesións graves.

• Use só en zonas ben ventiladas.
• Use protección ocular e roupa protectora cando traballe con baterías.
• Manter fóra do alcance dos nenos.
• Non expoña o cargador a choivas nin a condicións de humidade.
• Ensure the charger is disconnected from the power supply before making or breaking connections to the battery.
• Avoid dropping metal tools onto the battery. This could short-circuit the battery or other electrical parts, which may cause an explosion.
• This charger is not intended for use as a power supply.

Produto rematadoview

Figure 1: The DieHard DH137 10 Amp Battery Charger, showcasing its main unit and the red and black 50 Amp clamps.

Figura 2: Un ángulo view of the DieHard DH137 charger, highlighting its compact design and integrated handle.

The DieHard DH137 features a robust casing with a clear control panel. The panel includes LED indicators for charging status, battery maintenance, reverse hook-up, and bad battery detection. A prominent START/STOP button controls the charging process. The unit is equipped with heavy-duty 50 Amp clamps for secure connection to battery terminals.

• Indicadores LED: Provide visual feedback on the charging status (Charging, Charged/Maintaining, Clamps Reversed, Bad Battery).
• Botón START/STOP: Initiates and terminates the charging cycle.
• 50 Amp Clamps: Cl duradeiroamps for connecting to battery posts.
• Porto USB: For charging small electronic devices (2.1A MAX).

Configuración

Before connecting the charger, ensure the battery terminals are clean and free of corrosion. Position the charger on a stable, non-flammable surface away from the battery to allow for proper ventilation.

1. Verify the battery type (Standard, AGM, Gel) matches the charger's capabilities.
2. Ensure the charger's AC power cord is unplugged from the electrical outlet.
3. Conecta o positivo vermello (+) clamp ao terminal positivo (+) da batería.
4. Conecta o negativo negro (-) clamp to the negative (-) battery terminal. If connecting to a vehicle, connect the negative clamp ao chasis do vehículo ou ao bloque do motor, lonxe da batería e da liña de combustible.
5. Confirm all connections are secure.

Instrucións de funcionamento

Figure 3: The DieHard DH137 charger positioned on the engine bay of a vehicle, ready for connection.

Figure 4: A user connecting the red positive clamp of the DieHard DH137 to the positive terminal of a car battery.

The DieHard DH137 features fully automatic, microprocessor-controlled charging. Once connected, it will assess the battery and begin the appropriate charging stage.

1. Conectar á enerxía: Plug the charger's AC power cord into a standard 120V AC electrical wall outlet.
2. Iniciar a carga: Preme o INICIAR/PARAR button. The charger will begin its diagnostic and charging cycle.
3. Estado do monitor: Observe os indicadores LED:
   • Solid green LED: Indicates the battery is fully charged and in maintenance mode.
   • Solid yellow LED: Indicates charging is in progress.
   • Flashing red LED: Indicates reverse hook-up. Disconnect and re-connect clamps correctamente.
   • Solid red LED: Indicates a bad battery.
4. Multi-Stage Carga: The charger automatically progresses through various stages (desulfation, bulk charge, absorption, float) to optimize battery performance and longevity.
5. Reverse Hook-up Protection: Se clamps are connected incorrectly, the charger will not operate and the red LED will flash, preventing damage to the battery or charger.
6. Carga USB: To use the USB port, plug your device into the USB port. The USB ON/OFF and Battery Status LED will illuminate. When finished, press the button to turn off the USB.
7. Finalización: Once the green LED is solid, the battery is fully charged. You may leave the charger connected for long-term maintenance.
8. Desconectando: First, unplug the AC power cord from the outlet. Then, disconnect the negative (-) clamp, followed by the positive (+) clamp.

Notas importantes:

• The charger will automatically monitor and maintain the battery when fully charged, resuming continuous charging if the battery becomes discharged.
• This unit is a battery charger/maintainer, not a jump starter. It is designed for charging over time, not for instant starting of a dead battery.

Mantemento

Proper maintenance ensures the longevity and optimal performance of your DieHard DH137 battery charger.

• Limpeza: Disconnect the charger from all power sources and batteries before cleaning. Wipe the case and clamps with a dry cloth. Do not use solvents or abrasive cleaners.
• Almacenamento: Store the charger in a cool, dry place when not in use. Ensure the clamps are clean and not touching each other.
• Coidado do cable: Inspect the AC power cord and battery cables for any damage (cuts, fraying, exposed wires) before each use. Do not use the charger if any cables are damaged.

Resolución de problemas

Especificacións

• Marca: Die Hard
• Modelo: DH137
• Vol. De saídatage: 12 voltios
• Cargando Ampera: 10 Amp
• Tipos de batería compatibles: Standard, AGM, Gel
• Peso do artigo: 1.6 onzas
• Dimensións do produto: 8.75 x 4.75 x 9.5 polgadas
• Fabricante: Schumacher Electric Corp.
• Características: Multi-stage charging, Reverse hook-up protection, LED indicators, USB charging port.

Garantía e Soporte

For detailed warranty information, please refer to the warranty card included with your product or visit the official DieHard websitio. Garde o recibo da compra como proba de compra para calquera reclamación de garantía.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Schumacher Electric Corp. customer service. Contact details can typically be found in the product packaging or on the manufacturer's websitio.

Note: The provided JSON data includes information about optional protection plans (2-Year Protection Plan, 3-Year Protection Plan, Complete Protect) which are separate from the manufacturer's standard product warranty. Please consult the terms and conditions of these plans for details.