QIACHIP DC 12V 4-Channel Wireless RF Remote Control Relay Switch Kit User Manual

Introdución

This manual provides detailed instructions for the installation, operation, and maintenance of your QIACHIP DC 12V 4-Channel Wireless RF Remote Control Relay Switch Kit. This kit is designed for various remote control applications, offering flexibility and convenience for controlling lights, fans, garage doors, gates, and other DC 12V powered devices.

QIACHIP DC 12V 4-Channel Wireless RF Remote Control Relay Switch Kit components.

Image: The QIACHIP 4-channel relay receiver module and two 4-button remote control transmitters.

Características do produto

Control sen fíos: Operates on a 433Mhz RF frequency for reliable signal transmission.
Saída de 4 canles: Independently control up to four different devices.
Múltiples modos de traballo: Supports Momentary, Toggle, and Latched modes for versatile application.
Rango estendido: Up to 164ft (50m) transmission distance in open areas.
Alta compatibilidade: Suitable for various DC 12V applications including lights, fans, garage doors, and gate openers.
Ampliable: The receiver can store up to 20 remote controllers.

Especificacións

Fabricante	qiachip Electronic Technology
Peso do elemento	5.6 onzas
Dimensións do paquete	5.28 x 4.72 x 1.3 polgadas
Vol. de entrada do receptortage	DC 12 V
Frecuencia RF	433 Mhz
Baterías de control remoto	2 CR2032 batteries (required, not included)
Material	ABS

Image: Dimensions of the QIACHIP 4-button remote control transmitter (6.8cm x 3.6cm x 1.6cm).

Image: Dimensions of the QIACHIP 4-channel relay receiver module (75mm x 54mm x 25mm).

Contido do paquete

1 x QIACHIP 4-Channel Relay Receiver Module
2 x QIACHIP 4-Button Remote Control Transmitters

Configuración e instalación

Diagramas de cableado

Before connecting any wires, ensure the power supply is disconnected to prevent electrical shock. The receiver module operates on DC 12V. The relay outputs can control both DC and AC loads, depending on your application.

Various wiring diagrams for the QIACHIP 4-channel relay module, illustrating DC and AC connections.

Image: General wiring diagrams for DC and AC loads, including DC motor control.

Detailed wiring diagrams for connecting lights to the QIACHIP relay module.

Image: Wiring diagrams for controlling lights with the relay module (DC 12V and AC 85V-250V).

Wiring diagram for controlling two DC motors with the QIACHIP relay module.

Image: Wiring diagram for controlling two DC motors using the relay module.

Wiring diagram for connecting DC bulbs to the QIACHIP relay module.

Image: Wiring diagram for connecting DC bulbs to the relay module.

NOTE: Always ensure power is OFF before performing any wiring. Incorrect wiring can damage the device or cause electrical hazards.

Learning Mode / Pairing Transmitters

The receiver module supports three working modes: Momentary, Toggle, and Latched. All four channels on the receiver will operate in the same selected mode.

Borrar os códigos existentes: Press the learning button on the receiver module 8 times. The LED indicator will flash 8 times and then clear all stored remote codes. This is recommended before pairing new remotes or changing modes.
Pairing in Momentary Mode (Default):
- Press the learning button on the receiver module once. The LED indicator will turn on.
- Press any button on the remote control (e.g., button A). The LED indicator on the receiver will flash once and then turn off, indicating successful pairing in Momentary mode.
- In Momentary mode, the relay activates only while the remote button is pressed.
Pairing in Toggle Mode:
- Press the learning button on the receiver module twice. The LED indicator will turn on.
- Press any button on the remote control (e.g., button A). The LED indicator on the receiver will flash once and then turn off, indicating successful pairing in Toggle mode.
- In Toggle mode, one press of the remote button activates the relay, and a second press deactivates it.
Pairing in Latched Mode:
- Press the learning button on the receiver module three times. The LED indicator will turn on.
- Press button A on the remote control. The LED indicator will flash once.
- Then, press button B on the remote control. The LED indicator will flash once and then turn off, indicating successful pairing in Latched mode.
- In Latched mode, pressing button A activates the corresponding relay and deactivates any previously active relay. Pressing button B deactivates all relays.

Instrucións de funcionamento

Once the remote control transmitters are paired with the receiver module in your desired mode, operation is straightforward:

Modo momentáneo: Press and hold the corresponding button (A, B, C, or D) on the remote to activate the relay. Release the button to deactivate.
Alternar modo: Press the corresponding button (A, B, C, or D) once to activate the relay. Press the same button again to deactivate the relay.
Modo bloqueado: Press button A, B, C, or D to activate its respective relay. Only one relay can be active at a time in this mode. Pressing another button will deactivate the currently active relay and activate the new one.

Applications of the QIACHIP remote control relay switch, including garage doors and vehicle controls.

Imaxe: Examples of applications for the remote control system, such as garage doors, car sunroofs, and gate doors.

Image: A remote control being used to operate a truck liftgate, demonstrating practical application.

Mantemento

Substitución da batería: The remote control transmitters use CR2032 batteries. If the remote's range decreases or it becomes unresponsive, replace the batteries. To replace, carefully open the remote casing and insert new batteries with the correct polarity.
Limpeza: Use a soft, dry cloth to clean the receiver module and remote controls. Avoid using harsh chemicals or abrasive materials.
Ambiente: Keep the receiver module and remotes away from excessive moisture, extreme temperatures, and strong electromagnetic interference.

Resolución de problemas

O control remoto non responde:
- Comprobe as pilas do mando a distancia e substitúaas se é necesario.
- Ensure the remote is within the effective operating range of the receiver.
- Re-pair the remote control with the receiver module following the 'Learning Mode' instructions.
Alcance reducido:
- Substitúe as pilas do control remoto.
- Ensure there are no significant obstructions (e.g., thick walls, metal structures) between the remote and the receiver.
- Check for sources of RF interference near the receiver.
Relé non activado:
- Verify all wiring connections to the receiver and the load are secure and correct.
- Confirm the receiver is receiving proper DC 12V power.
- Ensure the remote is correctly paired and in the desired working mode.

Apoio

For any issues or questions regarding your QIACHIP DC 12V 4-Channel Wireless RF Remote Control Relay Switch Kit, please contact QIACHIP customer support. We are committed to providing assistance and ensuring your satisfaction.

Correo electrónico: Refer to your product packaging or the QIACHIP official websitio para os detalles de contacto.

	Manual de instrucións e especificacións técnicas do receptor sen fíos QIACHIP de 12 V e 4 canles Instrucións detalladas e especificacións técnicas para o receptor sen fíos QIACHIP de 12 V e 4 canles, que abarcan diagramas de cableado, modos de funcionamento (momentáneo, alternable, con retención) e procedementos de configuración para aplicacións de control remoto sen fíos.
	Receptor QIACHIP KR1201A/KR1201B de 12 V de 1 canle: Guía de instalación e funcionamento Guía completa para o módulo receptor de relé RF de 1 canle QIACHIP KR1201A e KR1201B de 12 V. Obtén información sobre os diagramas de cableado, os modos de funcionamento (momentáneo, alternable, con retención, con retardo) e os procedementos de configuración para diversas aplicacións como o control de luces, fechaduras de portas e motores.
	Módulo receptor inalámbrico de 1 canle QIACHIP KR1201B: instrucións e configuración Instrucións detalladas e guía de configuración para o módulo receptor de control remoto sen fíos QIACHIP KR1201B de 1 canle, incluíndo diagramas de cableado e configuración do modo de traballo.
	Manual de funcionamento do controlador de sentido de marcha cara adiante/atrás do motor QIACHIP de 12 V CC Este manual proporciona instrucións para o funcionamento do controlador de marcha cara adiante/atrás do motor CC de 12 V QIACHIP, incluíndo diagramas de cableado, descricións de funcións, métodos de configuración para os modos momentáneo, alternante e de retención, e especificacións técnicas. Detalla como emparellar controis remotos e reiniciar o dispositivo.
	Manual do usuario do receptor de control remoto sen fíos QIACHIP KR1204B de 12 V e 4 canles Manual de usuario completo para o receptor de control remoto sen fíos QIACHIP KR1204B de 12 V e 4 canles. Inclúe diagramas de cableado, modos de funcionamento (momentáneo, alternable, con retención), instrucións de configuración e especificacións técnicas.
	Manual do usuario do interruptor de control remoto sen fíos QIACHIP KR1204B de 12 V e 4 canles Manual de usuario para o módulo receptor de control remoto sen fíos QIACHIP KR1204B de 12 V e 4 canles. Inclúe diagramas de cableado, modos de funcionamento (momentáneo, alternable, con retención) e especificacións técnicas.

QIACHIP B07MTYGJHQ