1. Introdución
The HENDI Automatic Water Softener, Model 230459, is an advanced system designed for commercial use to effectively prevent limescale buildup in plumbing installations. This unit operates at 230V and 18W, ensuring efficient and reliable water treatment. By reducing mineral deposits, it helps extend the lifespan of your appliances and maintain optimal water flow.
Figura 1: Fronte view of the HENDI Automatic Water Softener, Model 230459.
2. Información de seguridade
This is a commercial product not intended for domestic use.
Always adhere to local regulations and safety standards during installation, operation, and maintenance. Disconnect power before performing any service or maintenance. Ensure proper grounding to prevent electrical hazards. Keep the unit away from direct sunlight and extreme temperatures.
3. Características do produto
- Presión de operación: 1.5 - 6.0 bares
- Temperatura ambiente de funcionamento: 5 – 38 °C
- Output for 10°dH: 1200 litros
- Panel de control: Allows configuration of operating time, regeneration time, and treated water quantity.
- Bloqueo automático: Prevents unauthorized access to settings.
- Bloqueo para nenos: Special function to prevent accidental changes.
4. Configuración e instalación
The HENDI Automatic Water Softener is designed for installation on the main water line. It should be installed before the water line splits to the water heater or other plumbing fixtures to ensure all water entering the system is treated.
- Selección de localización: Choose a dry, level area with adequate space for installation and future access. Ensure the ambient temperature remains within 5 – 38 °C.
- Conexión de abastecemento de auga: Connect the unit to the main water supply line. Ensure all connections are secure and leak-free.
- Conexión de drenaxe: Connect the drain line according to local plumbing codes.
- Conexión eléctrica: Connect the unit to a grounded 230V electrical outlet.
- Inicio inicial: Follow the operating instructions to initiate the first regeneration cycle and configure settings.
Note on Iron Content: If your source water has iron levels exceeding 0.3 ppm, it is recommended to use an iron removal filter before the water softener to ensure optimal performance and longevity of the unit.
5. Instrucións de funcionamento
The unit features an intuitive control panel for managing its functions. Refer to the display and buttons for configuration.
Figure 2: Close-up of the control panel with display and buttons.
- Setting Operating Time: Use the control panel to set the desired operating schedule for the unit.
- Configuring Regeneration Time: Adjust the regeneration cycle frequency and duration based on your water hardness and usage.
- Adjusting Treated Water Quantity: Set the volume of water to be treated before a regeneration cycle is initiated.
- Bloqueo automático: The system includes an automatic lock feature to prevent unintended changes to the settings. Consult the on-screen prompts for activation/deactivation.
- Bloqueo para nenos: Activate the child lock function through the control panel to secure settings from accidental tampering.
6. Mantemento
The HENDI Automatic Water Softener Model 230459 is designed for minimal maintenance after initial setup. Regular checks are recommended to ensure optimal performance.
- Inspección periódica: Visually inspect the unit and connections for any signs of leaks or damage.
- Limpeza: Keep the exterior of the unit clean and free from dust and debris. Use a soft, damp pano para limpeza. Non empregue produtos de limpeza abrasivos.
- Nivel de sal: This unit operates using an ion exchange method, which typically requires salt for regeneration. Ensure the salt reservoir is adequately filled. Refer to the control panel for indicators and specific instructions on salt replenishment.
7 Solución de problemas
If you encounter issues with your HENDI Automatic Water Softener, please refer to the following common troubleshooting steps:
| Problema | Causa posible | Solución |
|---|---|---|
| A unidade non se acende | Sen fonte de alimentación; conexión solta | Check power cable and outlet. Ensure unit is properly plugged in. |
| Water still hard | Incorrect settings; low salt level; high iron content; unit malfunction | Verify control panel settings. Check and refill salt reservoir. Test water for iron levels and consider a pre-filter if needed. Contact support if problem persists. |
| Mensaxe de erro na pantalla | Internal fault; sensor issue | Anote o código de erro e consulte o manual completo do produto ou póñase en contacto co servizo de atención ao cliente. |
For issues not listed here, or if solutions do not resolve the problem, please contact HENDI customer support.
8. Especificacións
| Atributo | Detalle |
|---|---|
| Fabricante | HENDI |
| Número de modelo | 230459 |
| Dimensións do produto | 56 x 42 x 24.5 cm (22 x 16.5 x 9.6 polgadas) |
| Peso | 9.94 kg (21.9 lb) |
| Voltage | 230 voltios |
| Consumo de enerxía | 18 vatios |
| Presión de operación | 1.5 - 6.0 bares |
| Temperatura ambiente de funcionamento | 5 – 38 °C |
| Caudal | 5 litros por minuto |
| Capacity (10°dH) | 1200 litros |
| Material | Cerámica |
| Método de instalación | Autónomo |
| Método de purificación | Intercambio iónico |
| Características especiais | Bloqueo infantil |
9. Información da garantía
HENDI products are manufactured to high-quality standards. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official HENDI websitio. Garda o comprobante de compra para calquera reclamación de garantía.
10. Apoio
For technical assistance, spare parts, or further inquiries regarding your HENDI Automatic Water Softener, please contact HENDI customer service. Contact details can be found on the HENDI websitio web ou na documentación que se inclúe co produto.
HENDI Websitio: www.hendi.eu
