KING KB ECO2S Garage Heater 15000W/240V Instruction Manual

1. Introdución

The KING KB ECO2S Garage Heater is designed to provide efficient and controlled heating for garages and similar large spaces. This unit features an integrated ECO2S electronic thermostat with remote control, offering energy-efficient 2-stage heating and an Eco mode that automatically adjusts wattage. It also includes fan-only and timer modes, along with an auto-memory feature to retain settings after power interruptions. Constructed with spiral steel elements and a high CFM fan, it ensures even air distribution and prolonged heater life. A universal wall/ceiling bracket is included for flexible installation.

Imaxe: Fronte view of the KING KB ECO2S Garage Heater, highlighting the control panel and heating elements.

2. Información importante de seguridade

WARNING: Read all instructions before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.

• Desconecte sempre a corrente antes de realizar o mantemento ou a limpeza do quentador.
• Este aquecedor está quente cando está en uso. Para evitar queimaduras, non deixe que a pel espida toque superficies quentes.
• Manteña os materiais combustibles, como mobles, almofadas, roupa de cama, papeis, roupa e cortinas a polo menos 3 pés (0.9 m) da parte frontal do quentador e mantelos lonxe dos lados e da parte traseira.
• Non use ao aire libre.
• Este quentador non está pensado para o seu uso en baños, lavadoiro e lugares interiores similares.
• Non pase o cable debaixo da alfombra. Non cubra o cable con alfombras, corredores ou revestimentos similares. Coloque o cable lonxe da zona de tráfico e onde non se tropece.
• Conecte sempre os quentadores directamente a unha toma/receptáculo de parede. Nunca use un cable de extensión ou unha toma de alimentación reubicable (toma de toma/multimetro).
• This heater is for 240V applications only. Ensure proper wiring and circuit breaker capacity.
• A instalación debe ser realizada por un electricista cualificado de acordo con todos os códigos eléctricos locais e nacionais.

3. Contido do paquete

The KING KB ECO2S Garage Heater package includes the following items:

• Unidade de calefacción de garaxe KING KB ECO2S
• Soporte universal de montaxe en parede/teito
• Mando a distancia portátil
• Remote Control Wall Holder
• Installation Hardware (lag bolts, nuts, etc.)
• Heavy-duty pigtail (for electrical connection)

Image: KING KB ECO2S Garage Heater shown with its included mounting bracket and remote control.

4. Configuración e instalación

4.1 Montaxe do calefactor

The universal bracket allows for wall or ceiling mounting. Ensure the mounting surface can support the heater's weight (approximately 48 pounds) and is structurally sound. Use the provided lag bolts to secure the bracket to framing members.

• Attach the bracket to the heater using the large knobs on the sides.
• Adjust the heater's angle using the smaller knobs on the bracket. The heater can be tilted to four different positions to direct heat as needed.

Image: Diagram illustrating recommended garage coverage based on heater wattage. The 15000W model heats up to 1,500 sq ft.

4.2 Conexión eléctrica

WARNING: Electrical installation must be performed by a licensed electrician in accordance with all local and national electrical codes.

• Ensure power is disconnected at the circuit breaker before beginning any wiring.
• Remove the access panel on the heater by loosening the Phillips screw.
• Remove the knockout on the side of the heater where the wiring will enter.
• Install the provided grommet with integral strain relief into the knockout hole.
• Connect the heavy-duty pigtail wires to the terminal block inside the heater:
  • Black wire to L1 lug.
  • Red wire to L2 lug.
  • Green wire to the grounding screw.
• Ensure all wires are securely tightened and that no insulation is under the terminals.
• Tighten the strain relief nut to secure the pigtail and prevent damage to the wiring.
• Close the access panel and secure it with the Phillips screw.
• This 15000W, 240V unit requires a minimum of 8 AWG copper wire and a 40 Amp interruptor.

Imaxe: Traseira view of the heater with the wiring access panel open, showing the terminal block for electrical connections.

4.3 Configuración do termostato

On the back of the heater, there is a toggle switch to select between the built-in thermostat and an external thermostat.

• Set the switch to "I" for the built-in thermostat (recommended for most users).
• Set the switch to "II" if you are using an external thermostat wired by an electrician.
• Incorrect setting of this switch will prevent normal operation.

4.4 Installation Video Reference

The following video demonstrates the wiring and mounting process for a similar garage heater. While the model shown is 6000W, the general installation principles apply to the KING KB ECO2S heater.

5. Instrucións de funcionamento

The heater features an intuitive control panel and a remote control for convenient operation.

5.1 Panel de control

Upon plugging in the unit, it will beep, indicating power and correct voltage. The control panel features a digital display and several buttons:

• Botón de encendido: Activa / apaga a unidade.
• Botón de modo: Cycles through different heating modes:
  • Baixo: Operates at a lower wattage.
  • Modo Eco: Automatically uses the lowest wattage needed to heat the room, optimizing energy efficiency.
  • Só fan: Fai circular o aire sen quentar.
  • Alto: Operates at maximum wattage for rapid heating.
• Botóns arriba / abaixo: Axuste a configuración de temperatura desexada.
• Botón do temporizador: Sets a timer for the heater to run for a predetermined length of time, after which it will automatically shut off.

Imaxe: Fronte view of the heater, showing the adjustable louvers for directing airflow.

5.2 Control remoto

The compact remote control provides full functionality from a distance, allowing you to adjust settings without directly accessing the unit.

• Botón de encendido: Activa / apaga a unidade.
• Botón de modo: Cycles through heating modes (Low, Eco, Fan Only, High).
• Temperatura arriba/abaixo: Axusta a temperatura desexada.
• Botón do temporizador: Axusta o temporizador de funcionamento.

The remote control is a convenient feature, especially when the heater is mounted high or in a hard-to-reach location.

6. Mantemento

WARNING: Always disconnect power at the main service panel before attempting any maintenance or cleaning.

• Limpeza: Limpar periodicamente o exterior do quentador cun pano suave eamp pano. Non use produtos de limpeza ou disolventes abrasivos.
• Eliminación de po: Use a vacuum cleaner with a brush attachment to remove dust from the grilles and heating elements. Ensure the heater is completely cool before cleaning.
• Inspección: Regularly inspect the power cord and plug for any signs of damage. If damaged, do not use the heater and contact a qualified electrician for repair.
• Lubricación: The unit features a permanently lubricated motor and does not require additional lubrication.

7 Solución de problemas

8. Especificacións

9. Garantía e soporte

For warranty information, please refer to the documentation included with your product or visit the official KING website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact KING customer service.

A información de contacto adoita atoparse na ficha do fabricante websitio ou na embalaxe do produto.