Seco-Larm SK-917T2-GNQ Enforcer Pendant RF Transmitter User Manual

1. Introdución

The Seco-Larm SK-917T2-GNQ Enforcer Pendant RF Transmitter is designed to provide wireless control for various applications and devices. This device operates at 315MHz and is compatible with all Seco-Larm 315MHz receivers. It can be used to control functions such as garage doors, gates, home lighting, or alarm panels, offering convenient remote operation. Its compact, slimline design includes a keychain for portability.

Imaxe 1.1: The Seco-Larm SK-917T2-GNQ Enforcer Pendant RF Transmitter. This black, rectangular device features two distinct buttons labeled '1' and '2' on its surface. The brand name 'ENFORCER' is visible below the buttons. A metal keychain ring is attached to the transmitter, enhancing its portability.

2. Características do produto

• Control sen fíos: Enables remote operation of compatible devices with the push of a button.
• CODEBUMP Technology: Incorporates anti-code grabbing technology for enhanced security.
• Compatibilidade: Fully compatible with all 315MHz Seco-Larm receivers.
• High Security Codes: Offers over 18 quintillion possible codes to prevent unauthorized access.
• Rango de funcionamento ampliado: Operates up to 500 feet, depending on installation and environmental factors.
• LED Transmission Indicator: Provides visual confirmation of signal transmission.
• RF Anti-Scan Protection: Further enhances security against scanning attempts.
• Deseño Slimline: Compact and portable, includes a keychain for easy carrying.
• Two Buttons, Three Channels: Provides control over multiple functions.

3. Contido do paquete

Verifica que todos os elementos estean presentes no paquete:

• Seco-Larm SK-917T2-GNQ Enforcer Pendant RF Transmitter with Keychain
• Pila CR2032 (preinstalada ou incluída)

4. Configuración

4.1. Instalación/activación da batería

The transmitter comes with a CR2032 battery. In most cases, the battery is pre-installed. If the transmitter does not respond, or if the LED indicator does not light up when a button is pressed, the battery may need to be activated or replaced. Refer to the "Maintenance: Battery Replacement" section for instructions.

4.2. Pairing with a Receiver

To function, the SK-917T2-GNQ transmitter must be paired or "learned" into a compatible 315MHz Seco-Larm receiver. The specific pairing procedure varies depending on the model of your Seco-Larm receiver. Please refer to the instruction manual provided with your Seco-Larm receiver for detailed pairing instructions.

1. Ensure your Seco-Larm receiver is powered on and in programming mode (refer to receiver manual).
2. Press the desired button(s) on the SK-917T2-GNQ transmitter as instructed by your receiver's manual to transmit the code.
3. Confirm successful pairing via the receiver's indicator (e.g., LED flash, audible beep).

5. Funcionamento

Once the transmitter is successfully paired with your Seco-Larm receiver, you can operate your connected devices.

• Funcións do botón: The SK-917T2-GNQ features two buttons, typically labeled '1' and '2'. These buttons can be programmed to control different functions or devices depending on your receiver's capabilities and your programming choices.
• Transmisión dun sinal: Press and hold the desired button for approximately one second. The LED indicator on the transmitter will illuminate, confirming that a signal is being transmitted.
• Dispositivos de control: The receiver will interpret the transmitted signal and activate the corresponding device or function (e.g., open a garage door, turn on a light, arm/disarm an alarm system).

For specific actions associated with each button, refer to your receiver's programming documentation.

6. Mantemento

6.1. Substitución da batería

The transmitter is powered by a single CR2032 lithium coin cell battery. When the LED indicator becomes dim or fails to light up during button presses, it is time to replace the battery.

1. Locate the small notch or seam on the side of the transmitter casing.
2. Abra con coidado a casinusando un pequeno destornillador plano ou unha ferramenta similar.
3. Remove the old CR2032 battery, noting its polarity (+ side up).
4. Insira unha nova batería CR2032 co lado positivo (+) cara arriba.
5. Aliña as dúas metades do casing and press them firmly together until they snap shut.
6. Test the transmitter by pressing a button and observing the LED indicator.

Atención: Dispose of used batteries according to local regulations. Keep batteries out of reach of children.

7 Solución de problemas

• O transmisor non responde:
  • Check the battery: Ensure the CR2032 battery is correctly installed and has sufficient charge. Replace if necessary.
  • Verify pairing: Confirm that the transmitter is properly paired with your Seco-Larm receiver. Refer to your receiver's manual for pairing instructions.
  • Obstructions: Ensure there are no significant physical obstructions between the transmitter and the receiver.
• Rango de funcionamento reducido:
  • Environmental factors: Thick walls, metal structures, or other electronic devices can interfere with RF signals.
  • Battery level: A low battery can reduce the effective transmission range. Replace the battery if needed.
  • Interference: Other 315MHz devices or strong electromagnetic fields might cause interference.
• O indicador LED non se acende:
  • Battery issue: The battery is likely depleted or incorrectly installed. Replace or re-install the battery.
  • Transmitter malfunction: If battery replacement does not resolve the issue, the transmitter may be faulty.

8. Especificacións

9. Información da garantía

The Seco-Larm SK-917T2-GNQ Enforcer Pendant RF Transmitter comes with a 2 ano de garantía limitada from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accident, unauthorized modification, or improper installation. Please retain your proof of purchase for warranty claims.

10. Apoio

For further assistance, technical support, or warranty inquiries, please contact Seco-Larm customer service. Refer to the official Seco-Larm websitio web ou a embalaxe do produto para obter a información de contacto máis actualizada.