Introdución
This manual provides essential information for the proper installation, operation, and maintenance of your Bewinner HDD Cooler. This device is designed to enhance the cooling performance of hard disk drives in both desktop and laptop computers, contributing to stable operation and extended lifespan of your storage devices. It features a dual-fan design for balanced airflow, a high rotational speed of 5000 RPM, and operates with a low noise level.
Información de seguridade
- Ensure the power supply is disconnected from your computer before installation or maintenance.
- Handle the cooler and your hard drive with care to prevent damage from static electricity.
- Do not obstruct the fan blades during operation.
- Manteña o dispositivo lonxe da humidade e das temperaturas extremas.
- This product is intended for internal computer use only.
Contido do paquete
Verifica que todos os elementos estean presentes no paquete:
- 1 x Bewinner Hard Drive Cooler
- 4 x parafusos de montaxe
Image: The Bewinner HDD Cooler, showing its dual fans, power connectors, and the included mounting screws.
Especificacións
| Tipo de produto | Enfriador de disco duro |
| Material | Plástico + Metal |
| Fan Size (each) | Aprox. 50 x 50 x 10 mm (1.97 x 1.97 x 0.39 polgadas) |
| Voltage | DC 12 V |
| Startup Voltage | DC 6.5 V |
| Traballo Voltage | DC 9.8-14.8V |
| Corrente nominal | 0.12A |
| Entrada de enerxía | 1.44 W |
| Blowing Rate (RPM) | 5000 ± 10 % |
| Caudal de aire máximo | 10.05 CFM |
| Nivel de ruído | 30 dBa |
| Tipo de rodamento | Manga |
| Resistencia | 2500 hours (at 25°C) |
| Compatibilidade | Desktop & Laptop HDDs |
| Conector de alimentación | 4-pin |
| Dimensións do produto (L x W x H) | 1.97" x 0.39" x 1.97" |
| Peso do elemento | 0.1 quilogramos |
Configuración e instalación
Follow these steps to install the HDD cooler:
- Prepara o teu sistema: Power off your computer and disconnect it from the power source. Open the computer case to access the hard drive bay.
- Identify HDD location: Locate the hard disk drive you wish to cool. The Bewinner HDD Cooler is designed to be mounted alongside or near a standard HDD.
- Position the cooler: Place the HDD cooler in a suitable position, typically adjacent to the hard drive, ensuring the fans are oriented to direct airflow towards the HDD for optimal cooling.
Image: The Bewinner HDD Cooler shown next to a 1.0TB hard drive, illustrating its intended application and relative size.
- Secure the cooler: Use the provided mounting screws to firmly attach the cooler to an available mounting point within your computer case or directly to the HDD enclosure if compatible.
- Conectar enerxía: Connect the 4-pin power connector from the HDD cooler to an available 4-pin power header on your computer's power supply unit. Ensure a secure connection.
- Comprobación final: Before closing the case, visually inspect all connections and ensure no cables are obstructing the fan blades or other components.
- Pecha a caixa e acende: Close your computer case, reconnect the power, and power on your system. The cooler should begin operating automatically.
Image: The Bewinner HDD Cooler with visual indicators of airflow, demonstrating its cooling function.
Instrucións de funcionamento
The Bewinner HDD Cooler operates automatically once properly installed and connected to your computer's power supply. The fans will spin when the computer is powered on, providing continuous airflow to cool your hard drive. No additional software or manual controls are required for its basic operation.
Imaxe: De arriba abaixo view of the Bewinner HDD Cooler, highlighting its quiet operation feature.
Mantemento
To ensure optimal performance and longevity of your HDD cooler:
- Eliminación de po: Periodically, with the computer powered off and unplugged, use compressed air or a soft brush to gently remove any dust accumulation from the fan blades and cooler housing. Dust can impede airflow and reduce cooling efficiency.
- Inspección: Occasionally inspect the cooler for any signs of wear or damage, particularly to the fan blades and power cable.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Os ventiladores non xiran. | Sen electricidade ou conexión solta. | Ensure the 4-pin power connector is securely attached to the power supply. Verify the computer is powered on. |
| Excessive noise from the cooler. | Fan obstruction or loose mounting. | Power off and unplug the computer. Check for any cables or debris obstructing the fan blades. Ensure the cooler is securely mounted with all screws tightened. |
| Pobre rendemento de refrixeración. | Dust accumulation or improper airflow. | Clean dust from the fan blades and cooler. Ensure the cooler is positioned to direct airflow effectively towards the HDD. |
Garantía e Soporte
Specific warranty details for the Bewinner HDD Cooler are typically provided at the point of purchase or can be obtained directly from the manufacturer. For technical support, product inquiries, or warranty claims, please refer to the contact information provided by Bewinner or your retailer.