1. Introdución
Welcome to the instruction manual for your Sygonix SY-RSL-T3 Wireless Wall Switch. This manual provides essential information for the safe and efficient use of your device. Please read it thoroughly before installation and operation, and keep it for future reference.
2. Instrucións de seguridade
Observe sempre as seguintes precaucións de seguridade para evitar lesións ou danos no dispositivo:
- Non abra o dispositivo casing. Non hai pezas que o usuario poida reparar no interior.
- Manteña o dispositivo lonxe da humidade, da auga e de temperaturas extremas.
- Use only the specified battery type (12V, not included) and ensure correct polarity during installation.
- Dispose of used batteries according to local regulations. Do not dispose of batteries in household waste.
- This device is designed for indoor use. If used outdoors, ensure it is protected from direct weather exposure.
- Manteña os materiais de embalaxe lonxe dos nenos.
3. Produto rematadoview
3.1 Compoñentes
The Sygonix SY-RSL-T3 Wireless Wall Switch consists of the following main components:
- Wireless Wall Switch Unit (1 piece)
- Mounting Hardware (screws, if included with purchase)
This image shows the front of the Sygonix SY-RSL-T3 wireless wall switch. It is white with two large push-buttons. The left button is marked with an 'I' (for ON) and a circle (for OFF), and the right button is similarly marked. The switch has a slightly curved, modern design.
3.2. Características
- Surface-mounted RSL wall switch
- Maximum wireless range: 70 meters (in open field)
- Push-button style operation (ON-OFF mode)
- Requires 12V battery (not included)
- Material: plástico
4. Configuración e instalación
4.1. Desembalaxe
Carefully remove all components from the packaging. Ensure all parts are present and undamaged. Retain the packaging for future transport or storage.
4.2. Instalación da batería
The device requires a 12V battery (not included). To install the battery:
- Locate the battery compartment on the back of the switch.
- Abra a tapa do compartimento da batería.
- Insert the 12V battery, ensuring correct polarity (+ and - terminals match the markings).
- Pecha a tapa do compartimento da batería de forma segura.
4.3. Montaxe do interruptor de parede
The SY-RSL-T3 is a surface-mounted switch. Choose a suitable, flat location for installation, free from excessive moisture or heat. Use appropriate screws or adhesive (not specified if included) to secure the switch to the wall. Ensure the mounting surface is clean and dry before installation.
Un ángulo view of the white Sygonix SY-RSL-T3 wireless wall switch, highlighting its two push-buttons and sleek profile.
Un lado view of the Sygonix SY-RSL-T3 wireless wall switch, showing its depth and how it would sit on a surface.
5. Instrucións de funcionamento
5.1. Pairing with an RSL Receiver
To operate the switch, it must first be paired with a compatible Sygonix RSL receiver (sold separately). The SY-RSL-T3 uses the RSL wireless protocol.
- Refer to your RSL receiver's instruction manual for specific pairing instructions.
- Typically, you will need to put the RSL receiver into a pairing or learning mode.
- Within the specified time frame (usually a few seconds), press one of the buttons (e.g., 'I' or 'O') on the SY-RSL-T3 wall switch.
- The receiver should indicate successful pairing (e.g., by flashing an LED or clicking).
- Repeat the process if you wish to pair the other button to a different receiver or channel, if supported by your receiver.
5.2. Funcionamento básico
Once successfully paired with an RSL receiver:
- Press the button marked with 'I' to send an ON signal to the paired receiver.
- Press the button marked with 'O' to send an OFF signal to the paired receiver.
The switch operates in a simple ON-OFF mode, controlling the connected device via the RSL receiver.
6. Mantemento
6.1. Limpeza
Clean the surface of the switch with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic surface.
6.2. Substitución da batería
When the switch's wireless range decreases significantly, or it stops responding to button presses, the battery may need replacement. Follow the steps in section 4.2 (Battery Installation) to replace the 12V battery.
7 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Device not responding to button presses. | Batería esgotada ou baixa. Not paired with receiver. Receiver is out of range or not powered. | Substitúe a batería de 12V. Perform the pairing procedure (see section 5.1). Ensure the RSL receiver is powered and within the 70m range. |
| Reduced wireless range. | Batería baixa. Obstructions between switch and receiver. | Substitúe a batería de 12V. Minimize physical obstructions (e.g., thick walls, metal objects) between the switch and the receiver. |
8. Especificacións
| Característica | Detalle |
|---|---|
| Fabricante | Sygonix |
| Número de modelo | SY-3523488 |
| Dimensións do produto (L x W x H) | 1.9 x 8 x 8 cm (19 x 80 x 80 mm) |
| Peso | 100 gramos |
| Material | Plástico |
| Fonte de enerxía | Alimentado por batería |
| Requírese batería | Yes (12 Volts, not included) |
| Cambiar de estilo | Pulsador |
| Modo de funcionamento | ACENDIDO APAGADO |
| Valoración actual | 1 A |
| Protocolo sen fíos | RSL |
| Max. Range (open field) | 70 metros |
| Cantidade por paquete | 1 unidade |
| Dispoñibilidade de pezas de reposto (UE) | 1 ano |
9. Garantía e soporte
Sygonix provides a 1-year warranty for spare parts availability within the EU. For further support, technical assistance, or warranty claims, please contact your retailer or Sygonix customer service. Please have your model number (SY-3523488) and ASIN (B07NLBNPTF) ready when contacting support.
Fabricante: Sygonix
Número de modelo: SY-3523488
ASIN: B07NLBNPTF
