Makerfire 7.4V 600mAh 2S Lipo Battery User Manual

Introdución

Thank you for choosing the Makerfire 7.4V 600mAh 2S Lipo Battery. This high-performance lithium polymer battery is designed for micro FPV racing drones and quadcopters, offering a reliable power source with an XT30 connector. Please read this manual thoroughly before using the battery to ensure safe operation and optimal performance.

Instrucións de seguridade importantes

Lithium Polymer (LiPo) batteries are powerful and require careful handling. Failure to follow these safety guidelines can result in fire, personal injury, and property damage.

Cargando: Always use a LiPo-compatible balance charger. Never charge unattended. Charge on a non-flammable surface away from combustible materials. Ensure charging current and voltage settings match the battery specifications (7.4V, 2S, 600mAh).
Descarga: Do not over-discharge the battery. Stop use immediately if the voltage drops below 3.0V per cell (6.0V for a 2S battery). Over-discharging can permanently damage the battery.
Almacenamento: Store LiPo batteries at room temperature in a fireproof container, away from direct sunlight, heat sources, and flammable materials. For long-term storage, charge or discharge the battery to a storage voltage of 3.8V per cell (7.6V for a 2S battery).
Danos físicos: Inspect the battery for any signs of damage (swelling, punctures, leaks, bent connectors) before each use. Do not use a damaged battery.
Temperatura: Do not expose the battery to extreme temperatures. Avoid charging or discharging in temperatures below 0°C (32°F) or above 45°C (113°F).
Eliminación: Dispose of LiPo batteries responsibly according to local regulations. Never dispose of them in regular trash or by incineration.
Nenos: Manteña as pilas fóra do alcance dos nenos.

Características do produto

Alta capacidade: 600mAh for extended flight times.
Voltage: 7.4V (2S) for consistent power delivery.
Taxa de descarga: 50C continuous / 100C burst for demanding applications.
Conector: XT30 plug for secure and efficient power connection.
Balancer Connector: JST-XHR for precise cell balancing during charging.
Deseño lixeiro: Optimized for micro FPV racing drones.

Especificacións

Image: Makerfire 7.4V 600mAh 2S Lipo Battery with XT30 Plug, showing its overall design and connectors.

Característica	Detalle
Capacidade da batería	600 mAh
Batería Voltage	7.4 V (2 S)
Taxa de descarga	50C (Continuous) / 100C (Burst)
Tipo de conector	XT30 Plug
Configuración das celas	2S1P
Balancer Connector	JST-XHR
Peso	Approximately 33.28g (1.17 oz)
Dimensións (L x W x H)	62 mm x 16 mm x 14 mm (2.44 x 0.63 x 0.55 polgadas)
Medidor de arame	18AWG Silicone Wire

Dimensions of Makerfire 7.4V 600mAh 2S Lipo Battery

Image: Detailed dimensions of the Makerfire 7.4V 600mAh 2S Lipo Battery, showing length, width, and height measurements.

Weight of Makerfire 7.4V 600mAh 2S Lipo Battery on a scale

Image: The Makerfire 7.4V 600mAh 2S Lipo Battery being weighed on a digital scale, displaying approximately 33.28 grams.

Configuración

1. Carga inicial

Before first use, fully charge the battery using a compatible LiPo balance charger. Ensure the charger is set to the correct voltage (7.4V or 2S) and capacity (600mAh) for this battery. Always monitor the charging process.

Components of Makerfire 7.4V 600mAh 2S Lipo Battery: 18AWG Silicone Wire, XT30 Plug, JST-XHR Balancer

Imaxe: Primeiro plano view of the battery's components, highlighting the 18AWG Silicone Wire, XT30 Plug, and JST-XHR balancer connector.

2. Installation in Device

Carefully connect the XT30 plug of the battery to the corresponding connector on your micro FPV racing drone or quadcopter. Ensure the JST-XHR balance lead is not pinched or damaged during installation. Secure the battery within the device to prevent movement during operation.

Makerfire 7.4V 600mAh 2S Lipo Battery compatibility with various micro drones like XK K130 helicopter, Torrent110, Beta75X, Armor 90, and Kingkong 90GT

Image: Diagram illustrating the compatibility of the 600mAh 2S Lipo Battery with several micro FPV drones and quadcopters.

Instrucións de funcionamento

Comprobación previa ao voo: Comprobe sempre o volume da bateríatage before each flight to ensure it is fully charged and healthy.
Conexión: Connect the battery to your device's power input. Ensure a firm connection.
Seguimento: During operation, monitor the battery voltage, especially if your device has telemetry. Stop flying when the battery reaches its minimum safe voltage (6.0V for 2S) to prevent over-discharge.
Desconexión: After use, disconnect the battery from the device.

Mantemento e almacenamento

Inspección periódica: Periodically inspect the battery for any signs of swelling, damage to the casing, or connector issues.
Limpeza: Keep the battery and connectors clean and free from dirt or debris.
Almacenamento a longo prazo: If storing the battery for more than a few days, charge or discharge it to a storage voltage of 3.8V per cell (7.6V for a 2S battery). This helps prolong battery life.
Ambiente de almacenamento: Store batteries in a cool, dry place, ideally in a fireproof LiPo bag or container, away from direct sunlight and extreme temperatures.

Resolución de problemas

Problema	Causa posible	Solución
A batería non se está cargando	Incorrect charger settings; damaged charger or battery; poor connection.	Verify charger settings (LiPo, 2S, 7.4V, 600mAh); check all connections; inspect battery for damage. If damaged, discontinue use.
Tempos de voo curtos	Battery degradation; over-discharge; high power consumption by device.	Ensure battery is fully charged; avoid over-discharging; consider device power draw. Replace battery if degradation is significant.
Inchazo da batería	Overcharging; over-discharging; physical damage; internal short circuit.	Deixar de usar inmediatamente. Swelling indicates a dangerous condition. Safely dispose of the battery.

Garantía e Soporte

For warranty information or technical support regarding your Makerfire 7.4V 600mAh 2S Lipo Battery, please contact Makerfire customer service through their official website or the retailer from whom you purchased the product. Please have your purchase details and product model information ready.

	Dron Makerfire Armor Blue Shark: Instrucións de uso Instrucións completas para operar o dron Makerfire Armor Blue Shark, que abarcan as pautas de seguridade, a configuración, os controis de voo, as características e a resolución de problemas.
	Dron Makerfire Armor 65 Lite RTF: especificacións, controis e guía de configuración Guía completa do dron Makerfire Armor 65 Lite RTF, que abrangue as especificacións, as instrucións de control, a configuración do transmisor de radio, a actualización do firmware e o contido do paquete. Aprende a pilotar e configurar o teu dron.
	Dron Makerfire Armor Blue Shark Mini: Instrucións de uso e guía de seguridade Instrucións completas para o minidron Makerfire Armor Blue Shark, que abarcan a configuración, o voo seguro, o uso da batería, as funcións do controlador, a resolución de problemas e o cumprimento da normativa FCC. Deseñado para usuarios maiores de 14 anos.
	Dron Shenzhen Makerfire F08-V2: Rematado o compoñente internoview e identificación da FCC Interior detallado view do dron Shenzhen Makerfire F08-V2, tamén coñecido como Armor Blue Shark. Este documento mostra o seu controlador de voo, receptor, cámara, batería e outros compoñentes electrónicos, xunto co ID da FCC: 2AKUC-F08-V2.