Donner Dark Mouse Distortion Pedal User Manual

1. Introdución

The Donner Dark Mouse Distortion Pedal is an effect unit designed for electric guitar, providing a range of distortion tones. It features two distinct distortion modes and a true bypass design to maintain signal integrity when the effect is disengaged. This manual provides essential information for setting up, operating, and maintaining your pedal.

Figure 1: The Donner Dark Mouse Distortion Pedal, designed to deliver classic distortion sounds.

2. Produto rematadoview

The Dark Mouse pedal features intuitive controls for shaping your sound. Understanding these controls is key to utilizing the pedal's full potential.

Figure 2: Control layout of the Dark Mouse Distortion Pedal.

Controis:

• 1. DC 9V Jack: Entrada de alimentación para un adaptador de CC de 9 V (negativo central).
• 2. Mode Switch (CLASSIC/HYPER): Toggles between two distinct distortion characteristics.
• 3. LEVEL Knob: Adjusts the overall output volume of the effect.
• 4. FILTER Knob: Controls the tone or brightness of the distortion. Turning clockwise increases treble.
• 5. DIST Knob: Adjusts the amount of distortion or gain.
• 6. Input Jack: Connect your guitar or previous effect pedal here.
• 7. Output Jack: Conéctate ao teu amplifier or next effect pedal.
• 8. Indicador LED: Ilumínase cando o efecto está activo.
• 9. Pedal de pedal: Engages or disengages the effect.

3. Configuración

Follow these steps to connect your Donner Dark Mouse Distortion Pedal:

1. Asegura o teu ampO adaptador estea apagado antes de facer calquera conexión.
2. Conecta a túa guitarra eléctrica ao Jack de entrada (6) of the pedal using a standard 1/4-inch instrument cable.
3. Conecta o Saída Jack (7) of the pedal to your amplifier's input using another standard 1/4-inch instrument cable.
4. Connect a 9V DC power adapter (center negative, 500mA minimum) to the Jack DC 9V (1). Note: The power supply is not included. Using an incorrect power supply may damage the pedal.
5. Once all connections are secure, you may turn on your ampmáis vivo.

Figure 3: Proper connection of the pedal to power and instrument cables.

4. Instrucións de funcionamento

The Dark Mouse pedal offers two distinct distortion modes and flexible controls to tailor your sound.

Involucrar o efecto:

Preme o Pedal (9) to toggle the effect on or off. The Indicador LED (8) will illuminate when the effect is active.

Selecting Distortion Modes:

Usa o Interruptor de modo (2) to select between the two distortion modes:

• CLÁSICO: Produce un cálido, vintage distortion sound with a subtle fuzz characteristic.
• HYPER: Offers a more powerful and aggressive sound with enhanced edges and low-end response.

Figure 4: The mode switch allows selection between Classic and Hyper distortion.

Axuste do ton e da ganancia:

Utilize the three control knobs to fine-tune your distortion sound:

• LEVEL Knob (3): Adjust this to set the overall output volume of the pedal. Start with it at a moderate level and adjust to match your bypassed signal volume.
• DIST Knob (5): Turn this knob clockwise to increase the amount of distortion, from subtle crunch to heavy saturation.
• FILTER Knob (4): This control acts as a tone shaping filter. Turning it clockwise will increase the brightness and treble content of the distortion, while turning it counter-clockwise will result in a darker tone.

Figure 5: The Level, Dist, and Filter knobs provide flexible control over the effect.

True Bypass:

The pedal features true bypass circuitry. This means that when the effect is disengaged, your guitar signal passes directly through the pedal without any electronic interference, preserving your original tone. The LED indicator will be off when in true bypass mode.

Figure 6: True bypass ensures a clean signal when the effect is off.

5. Mantemento

• Limpeza: Usa un pano suave e seco para limpar o exterior do pedal. Evita o uso de produtos de limpeza abrasivos ou solventes.
• Almacenamento: Garda o pedal nun lugar seco, lonxe de temperaturas extremas e da luz solar directa.
• Fonte de alimentación: Always use a 9V DC center-negative power adapter with a minimum of 500mA current. Disconnect the power supply when the pedal is not in use for extended periods.
• Coidado físico: The pedal features a durable aluminum alloy casing. Avoid dropping the pedal or subjecting it to excessive force.

6 Solución de problemas

• Sen son:
  • Comprobe todas as conexións dos cables (guitarra á entrada, saída á amp).
  • Ensure the power adapter is correctly connected and providing power.
  • Verify that your guitar and amplifier are functioning correctly.
  • If the LED is off, press the footswitch to engage the effect.
• Weak or Distorted Sound (when bypassed):
  • This pedal features true bypass, so a weak or distorted bypassed signal usually indicates an issue with cables or other equipment in your signal chain, not the pedal itself.
• Ruído/zunido non desexado:
  • Ensure you are using a regulated 9V DC center-negative power supply. Unregulated power supplies can introduce noise.
  • Check for faulty cables.
  • Move the pedal away from power transformers or other electronic devices that may cause interference.

7. Especificacións

8. Que hai na caixa

• 1 x Donner Dark Mouse pedal

9. Garantía e soporte

For warranty information or technical support, please refer to the official Donner website or contact Donner customer service directly. Keep your purchase receipt for warranty claims.