XUNATA Dimmable 18W 8-inch Ultra-Thin Round LED Panel Light Instruction Manual

Produto rematadoview

This manual provides instructions for the XUNATA Dimmable 18W 8-inch Ultra-Thin Round LED Panel Light. This LED panel light offers 1600 lumens, equivalent to a 140W incandescent bulb, while consuming only 18 watts. It features 6500K Daylight White illumination and is designed for recessed ceiling installation in various settings.

Características clave

• Eficiencia enerxética: 1600 lumens output with only 18W power consumption, replacing 140W incandescent bulbs.
• Regulable: Compatible with SCR (silicone-controlled rectifier) dimmers such as LUTRON DVCL-153P, FEIT 72302, and LEVITON TBL03 models.
• High Brightness & Long Lifespan: Utilizes SMD2835 LEDs for super bright illumination and boasts over 50,000 hours of operational life.
• Uniform Soft Light: Sideways light emission through a diffuser and guiding plate creates a uniform and soft light effect, which is pleasant on the eyes with flicker-free operation.
• Construción duradeira: Made with die-cast aviation aluminum for excellent heat dissipation and an intelligent constant current driver for safety.
• Fácil instalación: Includes pre-assembled spring clips and wiring caps for simplified setup.

Guía de instalación

Follow these steps for safe and proper installation of your LED panel light. Ensure power is disconnected before beginning any electrical work.

1. Apagar a enerxía: Locate the circuit breaker controlling the installation area and switch off the main power supply.
2. Buraco de corte: Using appropriate tools, cut a circular hole in the ceiling (sheetrock) with a diameter of 195-205mm (approximately 7.68-8.07 inches).
3. Conectar o transformador: Connect the LED driver (transformer) to the 110V AC power supply. Ensure all connections are secure and insulated, utilizing the provided wiring caps.
4. Luz de posición: Pull up the spring clips on the LED panel light.
5. Insert into Hole: Carefully insert the LED panel light into the prepared ceiling hole, ensuring the spring clips retract and hold the panel securely against the ceiling.
6. Adjust Panel: Gently adjust the panel to ensure it sits flush and tightly against the ceiling surface.

For visual assistance, please refer to the product demonstration video below.

Instrucións de funcionamento

The XUNATA LED Panel Light is designed for simple operation.

• Encendido/apagado: Once installed and connected to a power source, the light can be turned on or off using a standard wall switch.
• Función de atenuación: If connected to a compatible SCR dimmer switch (e.g., LUTRON DVCL-153P, FEIT 72302, LEVITON TBL03), the brightness of the LED panel light can be adjusted by manipulating the dimmer control.

Mantemento

The XUNATA LED Panel Light requires minimal maintenance.

• Limpeza: To clean the surface of the light, ensure the power is off. Use a soft, dry, or slightly damp pano. Evite produtos de limpeza abrasivos ou solventes, xa que poden danar o acabado.
• Non hai pezas reparables polo usuario: The LED components are integrated and not designed for user replacement. Do not attempt to disassemble the light fixture.

Resolución de problemas

If you encounter issues with your LED panel light, consider the following:

• A luz non se acende:
  • Check if the power supply is active at the switch and circuit breaker.
  • Verify all electrical connections are secure and correctly wired.
  • Ensure the LED driver is properly connected to both the power supply and the light panel.
• Light Flickering or Dimming Incorrectly:
  • Confirm that the dimmer switch used is compatible with LED lighting and specifically with SCR (silicone-controlled rectifier) dimmers.
  • Ensure the dimmer's load capacity is not exceeded by the number of lights connected.
  • Comprobe as conexións de cableado soltas.
• Brillo reducido:
  • If using a dimmer, ensure it is set to maximum brightness.
  • Comprobe a fonte de alimentación voltage is within the specified range (AC 110V).

If problems persist after checking these points, please contact customer support.

Especificacións técnicas

Garantía e Soporte

Garantía: The product description mentions a "100% MONEY BACK GUARANTEED" policy if you are not satisfied for any reason. For specific warranty terms and conditions, please refer to your purchase documentation or contact the seller directly.

Atención ao cliente: For further assistance, technical inquiries, or to report any issues, please contact XUNATA customer support. You can often find contact information through the seller's store page on Amazon: Visit the XUNATA Store.