Introdución
The Cooler Master Hyper 212 LED CPU Cooler is designed to provide efficient cooling for your desktop processor. Featuring a 120mm XtraFlo 'Fire Red' LED PWM fan and four direct contact copper heat pipes, this cooler offers a balanced performance between cooling efficiency and low noise operation. Its universal mounting system ensures compatibility with a wide range of Intel sockets.
Please read this manual carefully before installation and use to ensure proper setup and optimal performance.
Contido do paquete
Verifique que todos os elementos que se indican a continuación estean presentes no seu paquete:
- 1 x Cooler Master Hyper 212 LED CPU Cooler Unit
- 1 x Mounting Kit (for Intel sockets)
- 1 x Thermal Grease Pack
- 1 x Manual de usuario
Image: Illustrative view of the Cooler Master Hyper 212 LED CPU Cooler and its main components.
Configuración e instalación
This cooler is compatible with Intel sockets: LGA 2066, 2011-v3, 2011, 1156, 1155, 1151, 1150, 1366, and 775. The installation process involves securing the backplate, applying thermal paste, mounting the heatsink, and attaching the fan.
- Preparar a placa base: Ensure your motherboard is removed from the PC case if necessary for backplate installation. Identify the correct mounting holes for your Intel socket type.
- Instalar a placa traseira: Attach the universal Intel backplate to the rear of your motherboard, aligning the screws with the appropriate holes.
- Aplicar pasta térmica: Clean the CPU surface and apply a small amount of thermal grease (included) to the center of the CPU. Spread it evenly or allow the cooler's pressure to distribute it.
- Montar o disipador de calor: Carefully place the heatsink onto the CPU, ensuring the direct contact heat pipes make full contact. Secure the heatsink using the provided mounting brackets and screws, tightening them in a diagonal pattern until snug. Do not overtighten.
- Conectar ventilador: Use the quick-snap fan brackets to attach the 120mm XtraFlo fan to the heatsink. Ensure the fan is oriented to blow air through the heatsink fins towards the rear of your PC case.
- Conectar o cable do ventilador: Conecta o cable do ventilador PWM de 4 pinos ao conector CPU_FAN da placa base.
Imaxe: Lateral view of the cooler, showing the copper heat pipes extending from the base through the aluminum fins.
Instrucións de funcionamento
The Cooler Master Hyper 212 LED CPU Cooler operates automatically once connected to the motherboard's CPU_FAN header. The 4-pin PWM fan allows your motherboard to dynamically control the fan speed based on CPU temperature, optimizing for both cooling performance and noise levels.
- Automatic Speed Control: The fan speed will adjust between 600 and 1600 RPM (±10%) depending on the CPU load and temperature.
- Iluminación LED: The 'Fire Red' LEDs on the fan will illuminate when the fan is operating, providing aesthetic lighting inside your PC case.
- Configuración da BIOS/UEFI: You can fine-tune fan control settings through your motherboard's BIOS/UEFI interface for custom performance profiles, if desired.
Image: The Cooler Master Hyper 212 LED CPU Cooler with its 'Fire Red' LED fan glowing.
Mantemento
Un mantemento regular garante un rendemento de refrixeración óptimo e prolonga a vida útil do refrigerador da CPU.
- Eliminación de po: Periodically clean dust from the heatsink fins and fan blades using compressed air or a soft brush. Ensure the fan is powered off before cleaning.
- Fan Cleaning/Replacement: The quick-snap fan bracket allows for easy removal of the fan for thorough cleaning or replacement if needed. Gently unclip the fan from the heatsink, clean, and reattach.
- Pasta térmica: If you remove the heatsink for any reason, it is recommended to clean off the old thermal paste from both the CPU and the cooler base and apply a fresh layer before reinstallation.
Imaxe: Fronte view of the 120mm XtraFlo fan, showing its blade design.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Temperaturas altas da CPU |
|
|
| Ruído excesivo do ventilador |
|
|
| Cooler Does Not Fit in Case |
Especificacións
| Característica | Detalle |
|---|---|
| Modelo de produto | RR-212L-16PR-R1 |
| Enchufes compatibles | Intel LGA 2066 / 2011-v3 / 2011 / 1156 / 1155 / 1151 / 1150 / 1366 / 775 |
| Dimensións xerais (L x W x H) | 120 x 84 x 160 mm (4.7 x 3.3 x 6.3 polgadas) |
| Peso total | 705 g (1.55 lb) |
| Heatsink Dimensions (L x W x H) | 116 x 60 x 160 mm (4.6 x 2.4 x 6.3 polgadas) |
| Material do disipador de calor | 4 Direct Contact Copper Heat Pipes, Aluminum Fins |
| Heat Pipe Dimensions | Ø6 mm |
| Fan Dimensions (L x W x H) | 120 x 120 x 25 mm (4.7 x 4.7 x 1 polgadas) |
| Velocidade do ventilador | 600 - 1600 RPM (PWM) ±10% |
| Ventilador de fluxo | 66.3 CFM ±10% (@ 1600RPM) |
| Presión de aire do ventilador | 1.7 mm H2O ±10% (@ 1600RPM) |
| Esperanza de vida dos fans | 40,000 horas |
| Nivel de ruído do ventilador | 9 - 31 dB |
| Tipo de rodamento | Rodamento do rifle |
| Conector de alimentación | PWM de 4 pines |
| Clasificación por fans Voltage | 12 VDC |
| Corrente nominal | 0.19 A |
| Consumo de enerxía | 2.28 W |
Imaxe: De arriba abaixo view of the heatsink, showing the aluminum fins and the ends of the copper heat pipes.
Garantía e Soporte
Para obter información sobre a garantía e asistencia técnica, consulte a páxina oficial de Cooler Master. websitio web ou póñase en contacto co seu departamento de atención ao cliente. Garde o recibo da compra como proba de compra.
Oficial de Cooler Master Websitio: www.coolermaster.com
