1. Produto rematadoview
The Lithonia Lighting FMVCCLS 12-inch LED Vanity Fixture is designed to provide efficient and high-quality illumination for bath and powder rooms. This fixture features integrated LED technology and a switchable white color temperature function, allowing adjustment to 3000K, 3500K, or 4000K during installation. Its contemporary cylinder design with a brushed nickel finish offers a modern aesthetic.
Figure 1: Lithonia Lighting FMVCCLS 12-inch LED Vanity Fixture.
Características principais:
- Switchable White Color Temperature: Adjusts to 3000K (Warm White), 3500K (Neutral White), or 4000K (Cool White) via an integral switch.
- LED integrado: Provides 800 Lumens at 3000K, 870 Lumens at 3500K, and 880 Lumens at 4000K, with a 90 CRI for accurate color rendering.
- Longa vida útil: Offers approximately 50,000 hours of maintenance-free operation.
- Construción duradeira: Features an acrylic diffuser and a brushed nickel housing.
- Montaxe versátil: Can be installed on ceilings or walls, in vertical or horizontal orientations.
Vídeo oficial do produto:
Vídeo 1: Rematadoview of the Lithonia Lighting LED Vanity Collection, showcasing various models and features.
2. Información de seguridade
AVISO: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. All wiring connections must be in accordance with local and national electrical codes.
- Lea atentamente todas as instrucións antes da instalación.
- Ensure the electrical supply is turned off at the main circuit breaker or fuse box before beginning installation.
- Consulte a un electricista cualificado se non está seguro sobre o proceso de instalación.
- Non instale preto de materiais combustibles.
- Este aparello está destinado só para uso en interiores.
- Non intente modificar o aparello. Calquera modificación pode anular a garantía e supoñer un perigo para a seguridade.
3. Contido do paquete
Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:
- LED Vanity Fixture (1)
- Soporte de montaxe (1)
- Porcas (3)
- Parafusos de montaxe (2)
- Manual de instrucións (1)
4. Instrucións de instalación
This fixture can be mounted on a wall or ceiling, in either a vertical or horizontal orientation.
- Preparación para a instalación: Desconecte a enerxía no interruptor.
- Retirar o dispositivo antigo (se corresponde): Carefully disconnect and remove the existing fixture.
- Fixar o soporte de montaxe: Secure the mounting bracket to the junction box using the provided screws. Ensure it is firmly attached.
- Seleccione a temperatura da cor: Before final mounting, locate the color temperature switch inside the fixture. Select your desired color temperature (3000K, 3500K, or 4000K). This setting cannot be changed easily after installation.
- Conexións de cable: Connect the fixture's wires to the junction box wires:
- Conecta o cable negro da luminaria ao cable negro (vivo) da caixa de conexións.
- Conecta o cable branco da luminaria ao cable branco (neutro) da caixa de conexións.
- Conecta o cable de terra verde ou de cobre espido da luminaria ao cable de terra da caixa de conexións.
- Asegure todas as conexións con porcas para arames.
- Montar o aparello: Carefully align the fixture with the mounting bracket and secure it in place.
- Restaurar enerxía: Acende o interruptor de circuito.
Dimensións e opcións de montaxe:
Figura 2: Dimensións do produto para a planificación da instalación.
The fixture measures approximately 12 inches in length, 12 inches in width, and 12 inches in height (Note: The product dimensions provided in the specifications are generic. Refer to Figure 2 for specific measurements). It can be installed with or without a backplate, depending on your aesthetic preference and electrical box configuration.
Figura 3: Example of horizontal installation above a mirror.
5. Instrucións de funcionamento
Once installed and power is restored, the fixture will illuminate at the pre-selected color temperature. There are no external controls for color temperature adjustment after installation; any changes require accessing the internal switch (refer to Installation Step 4).
The fixture is designed for simple on/off operation via a standard wall switch (not included).
6. Mantemento
- Limpeza: Asegúrese de que a electricidade estea desconectada antes de limpala. Limpe a luminaria cun pano suave, seco ou lixeiramente húmido.amp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or acrylic diffuser.
- LED: The integrated LEDs are designed for long-term use and do not require replacement.
7 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A luminaria non se acende. |
|
|
| Light is too bright or not the desired color. | O interruptor de temperatura de cor está mal configurado. | Turn off power, access the internal color temperature switch, and adjust to the desired setting (refer to Installation Step 4). |
| Luz parpadea. |
|
|
8. Especificacións
| Característica | Detalle |
|---|---|
| Marca | Iluminación Lithonia |
| Nome do modelo | FMVCCLS 12IN MVOLT 30K35K40K 90CRI BN M6 |
| ASIN | B07P6TDH67 |
| Temperatura da cor | Switchable (3000K, 3500K, 4000K) |
| Material | Plastic (Acrylic diffuser), Brushed Nickel housing |
| Estilo | Cilindro |
| Tipo de fonte de luz | LED |
| Brillo | Up to 880 Lumens (at 4000K) |
| CRI | 90 |
| Wattage | 18 vatios |
| Voltage | 277 Volts (MVOLT implies multi-voltage, typically 120-277V) |
| Dimensións do produto | 12"L x 12"W x 12"H (Note: Actual fixture length is 12 inches, other dimensions are likely packaging or general category) |
| Peso do elemento | 1.5 libras |
| Tipo de instalación | Montaxe no teito, montaxe na parede |
| Uso interior/exterior | Interior |
| Característica especial | Temperatura de cor conmutable |
| Especificación Met | ENERGY STAR®, ADA |
9. Garantía e soporte
Garantía: This Lithonia Lighting fixture comes with a 5-year limited warranty. For detailed warranty terms and conditions, please refer to the documentation included with your product or visit the manufacturer's official websitio.
Atención ao cliente: If you encounter any issues or have questions regarding the installation, operation, or maintenance of your fixture, please contact Lithonia Lighting customer service. Contact information can typically be found on the product packaging or the official Lithonia Lighting websitio.
