ECOELER 6-inch Dimmable LED Disk Light Instruction Manual

1. About Your ECOELER LED Disk Light

The ECOELER 6-inch Dimmable LED Disk Light is a high-quality, energy-efficient lighting solution designed for various indoor applications. This fixture provides bright, warm white illumination and features a low-profile design for seamless integration into your ceiling.

• Alta calidade: Features a 7.3-inch round metal light cover for corrosion protection and rust prevention. Equipped with high-quality LED chips, it delivers 1000 lumens at 16.5 watts, ensuring well-balanced light with no flickering and an estimated lifespan of 50,000 hours.
• Smooth Dimmable: Offers a full range of seamless dimming from 5% to 100%, allowing precise control over brightness for any situation, from a soft night glow to bright task lighting.
• Baixo Profile Deseño: The ultra-thin 0.9-inch design provides a sleek look, ideal for spaces with low ceilings or for achieving a modern aesthetic.
• Aplicacións amplas: Apto para damp locations, making it perfect for entrances, living rooms, bedrooms, kitchens, dens, and covered outdoor areas.
• Seguridade asegurada: ETL and FCC listed, ensuring compliance with safety and quality standards.

2. Contido do paquete

Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:

• LED Disk Light Fixture (4 units)
• E26 Adapter and Spring Clips
• Installation Screws (Short and Long)
• Nuts de arame
• Manual de instrucións

3. Información de seguridade

Please read and understand all instructions before installing or operating this product. Failure to do so may lead to electric shock, fire, or other hazards that could cause injury or property damage.

• AVISO: Risco de descarga eléctrica. Desconecte a alimentación do fusible ou disyuntor antes de instalar ou reparar.
• AVISO: Risk of fire. Use only in circuits rated for 120V AC.
• Este produto debe ser instalado de acordo co código de instalación aplicable por unha persoa familiarizada coa construción e o funcionamento do produto e os perigos implicados.
• Asegúrate de que todas as conexións eléctricas estean seguras e sexan correctas.
• Do not modify the fixture or use it for any purpose other than its intended use.
• Non manipule o dispositivo coas mans molladas.
• Apto para damp localizacións.

4. Instrucións de instalación

The ECOELER LED Disk Light can be installed into either a standard junction box or a recessed can (5-inch or 6-inch).

4.1. Junction Box Installation

1. Apague a enerxía: Asegúrese de que a alimentación estea desconectada no disyuntor antes de comezar.
2. Retire a lente: Gently twist the light lens counter-clockwise to remove it from the fixture base.
3. Conectar o cableado: Connect the supply wires from the junction box to the fixture wires using the provided wire nuts (black to black, white to white, ground to ground).
4. Attach fixture to junction box: Align the fixture base with the junction box and secure it using the provided screws.
5. Reattach lens: Twist the lens clockwise onto the fixture base until secure.
6. Restaurar a enerxía: Volve a conectar o interruptor automático.

4.2. Recessed Can Installation

1. Apague a enerxía: Asegúrese de que a alimentación estea desconectada no disyuntor antes de comezar.
2. Retire a lente: Gently twist the light lens counter-clockwise to remove it from the fixture base.
3. Install E26 adapter: Screw the E26 adapter into the existing recessed can socket.
4. Conectar o cableado: Connect the fixture wires to the E26 adapter wires using the provided wire nuts (black to black, white to white).
5. Install spring clips: Attach the spring clips to the designated slots on the fixture base.
6. Push disk into can: Carefully push the LED disk light into the recessed can until the spring clips hold it securely in place, flush with the ceiling.
7. Reattach lens: Twist the lens clockwise onto the fixture base until secure.
8. Restaurar a enerxía: Volve a conectar o interruptor automático.

5. Instrucións de funcionamento

The ECOELER LED Disk Light is designed for simple operation and offers smooth dimming capabilities.

5.1. Activar/Desactivar

Acenda a luz cun interruptor de parede estándar conectado ao circuíto da luminaria.

5.2. Función de atenuación

This fixture is compatible with most standard LED dimmers, allowing for smooth brightness adjustment from 5% to 100%. To dim the light, use a compatible dimmer switch (not included) installed in your electrical system.

6. Mantemento

The ECOELER LED Disk Light requires minimal maintenance.

• Limpeza: Para limpar o aparello, asegúrese de que a corrente estea desconectada. Use un pano suave, seco ou lixeiramente húmido.amp pano. Non empregue produtos químicos agresivos nin produtos de limpeza abrasivos, xa que poden danar o acabado ou os compoñentes eléctricos.
• Non hai pezas reparables polo usuario: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the fixture.

7 Solución de problemas

If you experience issues with your ECOELER LED Disk Light, refer to the following common problems and solutions:

If problems persist, contact ECOELER customer support for assistance.

8. Especificacións

9. Garantía e soporte

ECOELER products are designed for quality and durability. This product comes with a limited warranty.

• Garantía: Refer to the product packaging or ECOELER's official websitio web para coñecer os termos e condicións específicos da garantía.
• Atención ao cliente: If you encounter any problems during use or have questions regarding installation or operation, please contact ECOELER customer service. We aim to provide a reply within 24 hours.