Manual de instrucións do ventilador de parede/teito Airmaster Fan I-24W2A (3-SP) de 24 polgadas

Introdución

Thank you for choosing the Airmaster Fan I-24W2A (3-SP) 24-Inch Wall/Ceiling Fan. This manual provides essential information for the safe installation, operation, and maintenance of your fan. Please read these instructions thoroughly before installation and use, and retain them for future reference.

This industrial-grade fan is designed for efficient air circulation in various settings, featuring a robust galvanized steel propeller and a totally enclosed air over ball bearing motor for durability and performance.

Información importante de seguridade

Siga sempre as precaucións de seguridade básicas ao usar electrodomésticos para reducir o risco de incendio, descarga eléctrica e lesións ás persoas.

• Asegúrate de que a fonte de alimentación coincida co volume do ventiladortage (115V, 1 Phase).
• Disconnect power before servicing or cleaning the fan.
• Non faga funcionar ningún ventilador cun cable ou enchufe danados.
• Manteña as mans, o cabelo e a roupa lonxe das pezas móbiles.
• The fan guard meets OSHA standards for safety. Do not remove or tamper with the guard.
• This fan is designed for wall or ceiling mounting. Ensure the mounting surface can support the fan's weight (approximately 44 lbs).
• Do not use this fan in wet locations or where flammable liquids or gases are present.

Contido do paquete

Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:

• Airmaster Fan I-24W2A (3-SP) Unit (24-inch diameter)
• Wall/Ceiling Mounting Bracket
• 15-foot Three Conductor Supply Cord with Plug
• Control remoto (se está incluído no teu modelo específico)
• Manual de instrucións

Configuración e instalación

This fan is designed for permanent wall or ceiling mounting. Professional installation is recommended.

Lugar de montaxe

• Choose a sturdy wall stud or ceiling joist capable of supporting the fan's weight (44 lbs) and operational forces.
• Ensure adequate clearance around the fan for optimal airflow and safety.
• Avoid locations where the fan could be easily struck or where its operation might interfere with other equipment.

Procedemento de montaxe

1. Asegure o soporte de montaxe: Position the wall/ceiling mounting bracket on the chosen surface. Mark the drilling points. Drill pilot holes appropriate for your mounting hardware (not included). Securely fasten the bracket using heavy-duty screws and anchors suitable for the mounting surface.
2. Attach the Fan Unit: Carefully lift the fan unit and align its mounting points with the bracket. Secure the fan to the bracket using the provided hardware. Ensure all bolts are tightened to prevent vibration and movement during operation.
3. Conexión eléctrica: The fan comes with a 15-foot three-conductor supply cord and plug. Plug the fan into a grounded 115V, 1 Phase electrical outlet. Ensure the outlet is easily accessible and protected by a circuit breaker.

Figura 1: Lateral view illustrating the fan's mounting bracket and motor. This image shows the fan attached to its wall/ceiling mount, highlighting the robust construction of the bracket and the motor housing.

Figura 2: Fronte view of the Airmaster I-24W2A fan. This image displays the fan's 24-inch diameter, the protective wire guard, and the three galvanized steel propeller blades.

Instrucións de funcionamento

The Airmaster I-24W2A (3-SP) fan features a 3-speed motor for adjustable airflow.

Encendido/apagado

• Ensure the fan is securely mounted and plugged into a grounded 115V outlet.
• Locate the speed control switch, typically located on the motor housing or via the remote control (if applicable).
• Turn the switch to the desired speed setting (Low, Medium, High) to start the fan.
• To turn off the fan, set the switch to the "Off" position.

Configuración de velocidade

The fan offers three speed settings to control the airflow:

• Baixo: Para unha circulación de aire suave.
• Medio: Para un fluxo de aire moderado.
• Alto: For maximum air movement (up to 5220 CFM).

This model is non-oscillating, meaning it directs airflow in a fixed direction once positioned.

Mantemento

Regular maintenance ensures optimal performance and extends the lifespan of your Airmaster fan.

Limpeza

• Desconecte sempre a alimentación antes de limpar.
• Use un suave, damp cloth to wipe down the exterior surfaces of the fan, including the motor housing and guard.
• For the fan blades, use a soft brush or vacuum cleaner attachment to remove dust and debris. Do not bend the blades.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or components.
• Ensure the fan is completely dry before reconnecting power.

Inspección

• Periodically inspect the power cord for any signs of damage, fraying, or cuts. If damaged, replace it immediately.
• Check the mounting hardware for tightness. Tighten any loose screws or bolts to prevent excessive vibration.
• Ensure the fan guard is securely in place and not damaged.

The motor is a totally enclosed air over ball bearing type and typically does not require lubrication.

Resolución de problemas

Before performing any troubleshooting, ensure the fan is disconnected from the power source.

Especificacións

Garantía e Soporte

Información da garantía

The Airmaster Fan I-24W2A (3-SP) comes with a 3 ano de garantía desde a data de compra. Esta garantía cobre defectos de materiais e fabricación en condicións de uso normal. Conserve o comprobante de compra para reclamacións de garantía.

For detailed warranty terms and conditions, please refer to the official Airmaster documentation or contact customer support.

Atención ao cliente

If you have any questions, require technical assistance, or need to report a problem with your Airmaster fan, please contact Airmaster customer support. You can find contact information on the official Airmaster websitio web ou a través do seu vendedor.

For more information about Airmaster products, visit the Airmaster Store.