Okin Okin Refined 2 Button Round Hand Control Handset

Okin Refined 2 Button Round Hand Control Handset User Manual

Model: Okin Refined 2 Button Round Hand Control Handset

Marca: Okin

1. Introdución

This manual provides comprehensive instructions for the Okin Refined 2 Button Round Hand Control Handset, designed for use with power recliners and lift chairs. This original Okin power recliner switch plugs directly into the actuator motor, offering reliable control for your furniture.

As características principais inclúen:

Okin 2 Button Round Hand Control Handset

Figure 1.1: The Okin Refined 2 Button Round Hand Control Handset, showing its compact design and integrated cable.

2. Configuración e instalación

Before installation, ensure your existing control uses a 5-pin round plug for compatibility. This control is designed for straightforward replacement.

2.1 Identifying the Connector

The Okin Refined Hand Control features a distinct 5-pin 90-degree connector. Verify that your recliner or lift chair's motor connection port matches this configuration.

Primeiro plano dun conector de 5 pines e 90 graos

Figura 2.1: detallada view of the 5-pin 90-degree connector, crucial for compatibility verification.

2.2 Pasos da instalación

  1. Desconectar a enerxía: Before beginning, always unplug your recliner or lift chair from the wall outlet to prevent electrical hazards.
  2. Localizar o control existente: Identify where the current hand control is connected to the chair's motor or power supply. This is typically a cable running from the control to a port on the motor.
  3. Eliminar o control antigo: Carefully disconnect the existing 5-pin plug from the motor. If the control is mounted in the arm, gently remove it from its housing.
  4. Connect New Control: Plug the 5-pin 90-degree connector of the new Okin hand control into the corresponding port on the chair's motor. Ensure the connection is firm and secure.
  5. Mount New Control: Insert the new round hand control into the designated opening in the arm of your recliner or lift chair. Ensure it sits flush and is stable.
  6. Restaurar enerxía: Once the new control is securely installed, plug your recliner or lift chair back into the wall outlet.

Vídeo 2.1: Un overview demonstrating the Okin 2 Button Round Hand Control Handset, including its features and connection type, which can assist with installation.

3. Instrucións de funcionamento

The Okin Refined Hand Control is designed for simple and intuitive operation.

3.1 Basic Recliner Operation

Close-up of the two-button control

Figure 3.1: Close-up of the two-button control, showing the distinct "Up" and "Down" sections.

3.2 USB Charging Functionality

This control features an integrated USB port, allowing you to charge compatible electronic devices such as smartphones and tablets while using your recliner. Simply connect your device's USB charging cable to the port on the hand control.

Nota: Charging speed may vary depending on the device and the power supply of your recliner. The USB port is for charging only and does not provide data transfer capabilities.

4. Mantemento

Proper maintenance ensures the longevity and optimal performance of your Okin Refined Hand Control.

5 Solución de problemas

If you encounter issues with your Okin Refined Hand Control, refer to the following common troubleshooting steps:

ProblemaCausa posibleSolución
Control is unresponsive or intermittent.Loose connection, power supply issue, damaged cable.
  • Ensure the 5-pin connector is fully and securely plugged into the motor.
  • Check that the recliner's power cord is securely plugged into a working wall outlet.
  • Inspect the entire length of the control cable for any visible damage (cuts, kinks, fraying). If damaged, replacement may be necessary.
  • Verify the chair's main power supply (transformer) is functioning correctly.
O porto USB non carga dispositivos.Device incompatibility, cable issue, power supply.
  • Ensure your device and charging cable are functioning correctly by testing them with another power source.
  • Verify the recliner is powered on and fully connected.
  • Some devices may require more power than the USB port can provide.
Chair moves slowly or with difficulty.Motor issue, obstruction, low power.
  • Check for any obstructions preventing the chair's mechanism from moving freely.
  • Ensure the power supply is adequate and stable.
  • If the issue persists, the motor itself may require professional inspection.

If these steps do not resolve the issue, please contact customer support or a qualified technician.

6. Especificacións

AtributoDetalle
MarcaOkin
CorNegro
Peso do elemento3.52 onzas
Dimensións do paquete4.61 x 3.7 x 1.89 polgadas
FabricanteOkin Refined
Factor de formaRecliner (Control)
Tipo de conector5-pin Round, 90-degree
Compoñentes incluídosUSB Cable (integrated into control)
CompatibilidadeOkin, Flexsteel, Dewert, Limoss motors
Usos recomendadosPower Recliners, Lift Chairs, Home Theater Seating

7. Información de seguridade

For safe use of your recliner or lift chair with this control, please observe the following safety guidelines:

Refer to the product's original packaging or documentation for any additional safety information specific to your recliner or lift chair.

8. Garantía e soporte

For information regarding warranty coverage for your Okin Refined 2 Button Round Hand Control Handset, please refer to the documentation provided with your original purchase or contact the seller directly.

If you require technical assistance, have questions about compatibility, or need to report a defect, please reach out to Okin customer support or the retailer from whom you purchased the product. Provide your product model number and purchase date when contacting support to facilitate a quicker resolution.