Introdución
Thank you for choosing the Orbit 24620 1-Outlet Hose Faucet Timer. This device is designed to automate your watering schedule, providing convenience and efficiency for your lawn and garden. With its user-friendly interface and robust construction, you can easily program precise watering times, helping to conserve water and maintain healthy plants. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your timer.
Información importante de seguridade
- Read all instructions carefully before operating the timer.
- Do not immerse the timer in water. It is water-resistant, not waterproof.
- Use only fresh alkaline batteries of the specified type (e.g., AA or AAA). Do not mix old and new batteries or different battery types.
- Remove batteries if the timer will not be used for an extended period to prevent corrosion.
- Do not expose the timer to extreme temperatures (below freezing or above 120°F / 49°C).
- Asegúrese de que todas as conexións estean axustadas para evitar fugas.
- Manter fóra do alcance dos nenos.
Compoñentes do produto
Familiarize yourself with the main parts of your Orbit 1-Outlet Hose Faucet Timer:
- Conexión de entrada: Conéctase á túa billa exterior.
- Conexión de saída: Connects to your garden hose.
- Pantalla dixital: Shows time, program settings, and status.
- Dial de control: Used to navigate through programming options.
- Botóns: For setting specific values (e.g., "SET CLOCK", "START TIME", "HOW LONG", "HOW OFTEN", "AUTO/MANUAL", "OFF").
- Compartimento de batería: Located on the back or side, for battery installation.

Figura 1: Fronte view of the Orbit 1-Outlet Hose Faucet Timer, showing the digital display and control dial. The inlet is at the top, and the outlet is at the bottom.
Configuración e instalación
1. Instalación da batería
- Locate the battery compartment on the back or side of the timer.
- Remove the battery tray or cover.
- Insert two (2) new AA alkaline batteries, ensuring correct polarity (+/-).
- Replace the battery tray or cover securely. The display should light up.
2. Attaching the Timer to the Faucet
- Ensure your outdoor faucet is turned off.
- Thread the timer's inlet connection (top) onto your outdoor faucet.
- Hand-tighten until snug. Do not overtighten.
- Turn on your faucet fully. The timer is designed to operate under full water pressure.
3. Conexión da mangueira
- Thread your garden hose onto the timer's outlet connection (bottom).
- Aperte a man ata que quede axustado.

Figura 2: Lado view of the Orbit 1-Outlet Hose Faucet Timer, showing the robust construction and connections.
Instrucións de funcionamento
The Orbit timer features a large digital display and a simple dial for programming. Rotate the dial to select a setting, then use the buttons to adjust values.
1. Establecer o reloxo
- Xire o disco para Axustar o reloxo.
- A hora parpadeará. Usa o + e - buttons to set the current hour (AM/PM).
- Preme o SEGUINTE button to move to minutes.
- Use + e - to set the current minutes.
- Preme SEGUINTE para confirmar.
2. Hora de inicio
- Xire o disco para HORA DE INICIO.
- Set the desired time for watering to begin using the + e - buttons for hour and minutes.
- Preme SEGUINTE para confirmar.
3. How Long (Watering Duration)
- Xire o disco para CANTO TEMPO.
- Set the duration for each watering cycle from 1 to 360 minutes using the + e - botóns.
- Preme SEGUINTE para confirmar.
4. How Often (Watering Frequency)
- Xire o disco para Cantas veces.
- Establece a frecuencia:
- Every hour (for short, frequent watering)
- Every 6, 12 hours
- Every 1, 2, 3... up to 7 days
- Usa o + e - buttons to select the desired interval.
- Preme SEGUINTE para confirmar.
5. Auto/Manual Operation & Rain Delay
- AUTOMÁTICO: Xire o disco para AUTO/MANUALO temporizador funcionará agora segundo a programación programada.
- MANUAL: To manually water, turn the dial to AUTO/MANUALe, a continuación, prema MANUAL botón. Use + e - to set a manual watering duration, then press ENTRAR to start. The timer will revert to AUTO after the manual cycle.
- ATRASO DA CHUVIA: If rain is expected, you can pause your watering schedule. Turn the dial to AUTO/MANUALe, a continuación, manteña premida a tecla RETRASO DA CHUVIA botón. Use + e - to select a delay of 1 to 7 days. The timer will resume its schedule after the delay.
6. DESACTIVADO
Xire o disco para DESACTIVADO to stop all automatic and manual watering. The timer will remain off until the dial is moved to another setting.
Mantemento
Substitución da batería
When the battery indicator on the display shows low power, or if the display becomes dim, it's time to replace the batteries. Follow the battery installation steps in the "Setup and Installation" section. Replacing batteries typically retains your programmed settings for a short period, but it's good practice to verify them after replacement.
Limpeza
Limpar o temporizador co anuncioamp cloth to remove dirt or debris. Do not use abrasive cleaners or solvents. Ensure the battery compartment remains dry.
Invernalización
Before the first frost, remove the timer from the faucet. Drain any water from the timer and store it indoors in a dry, protected location where temperatures will not drop below freezing. Remove batteries before storage.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Timer does not turn on / Display is blank. | Baterías gastadas ou instaladas incorrectamente. | Replace with new alkaline batteries, ensuring correct polarity. |
| Water does not turn on. |
|
|
| Water does not turn off. |
|
|
| Fugas nas conexións. |
|
|
Especificacións
| Número de modelo | 24620 |
| Fonte de enerxía | 2 pilas alcalinas AA (non incluídas) |
| Duración do rego | 1 a 360 minutos |
| Frecuencia de rego | Every hour up to every 7 days |
| Rain Delay Options | 1 a 7 días |
| Presión de operación | Minimum 25 PSI, Maximum 100 PSI |
| Temperatura de funcionamento | 3 °C - 49 °C (38 °F - 120 °F) |
| Dimensións | 7.62 x 18.11 x 22.56 cm (3 x 7.13 x 8.88 polgadas) |
| Peso | 0.42 kg (0.93 lb) |

Figura 3: Dimensions of the Orbit 1-Outlet Hose Faucet Timer: 7.62cm depth, 18.11cm height, 22.56cm width.
Información da garantía
Orbit products are manufactured with quality materials and workmanship. For specific warranty details, please refer to the warranty card included with your product or visit the official Orbit websitio. Garde o recibo da compra como xustificante da mesma.
Atención ao cliente
If you have any questions, require technical assistance, or need to troubleshoot issues not covered in this manual, please contact Orbit customer support.
- Websitio: www.orbitanline.com
- Teléfono: Refer to the Orbit websitio para os números de contacto rexionais.





