Celly Pro Mount Screen/Dashboard Holder Instruction Manual

1. Introdución

The Celly Pro Mount Screen/Dashboard Holder is a universal car mount designed to securely hold smartphones up to 6.5 inches. It features a strong suction cup for attachment to either the windshield or dashboard, an automatic locking function for optimal stability, and 360-degree rotation for flexible viewing angles. This manual provides instructions for proper installation, operation, and maintenance of your device.

2. Información de seguridade

• Do not install the holder in a location that obstructs your view of the road, mirrors, or vehicle controls.
• Ensure the holder is securely attached before placing a device in it. A loose holder can become a projectile in an accident.
• Do not adjust the holder or your device while driving. Always pull over to a safe location to make adjustments.
• Avoid exposing the holder to extreme temperatures for prolonged periods, as this may affect the suction cup's performance.
• Manter fóra do alcance dos nenos.

3. Contido do paquete

Comprobe que estean presentes todos os compoñentes:

• Celly Pro Mount Holder Unit
• Base ventosa

Imaxe 3.1: Fronte view of the Celly Pro Mount Holder Unit.

4. Configuración e instalación

Follow these steps to install your Celly Pro Mount:

1. Escolle unha localización: Select a flat, clean, and smooth surface on your windshield or dashboard that does not obstruct your view ou interferir cos airbags.
2. Limpar a superficie: Wipe the chosen surface with a clean cloth to remove any dust or grease. Allow it to dry completely.
3. Coloque a ventosa: Press the suction cup firmly against the cleaned surface.
4. Asegurar a palanca: Push the locking lever down to create a strong vacuum seal. Ensure the holder is firmly attached and does not wobble.
5. Axustar ángulo: Loosen the adjustment knob on the arm to set the desired viewing angle, then tighten it to secure the position.

Imaxe 4.1: Lateral view of the holder showing the adjustable arm and suction cup base.

Imaxe 4.2: Ex.ample of the holder installed on a car dashboard with a smartphone.

5. Instrucións de funcionamento

Using your Celly Pro Mount is straightforward:

1. Insert Smartphone: Gently pull apart the adjustable grips of the holder. Place your smartphone into the holder and release the grips. The automatic locking function will secure your device.
2. Remove Smartphone: To remove your smartphone, gently pull apart the adjustable grips again and lift your device out.
3. Rotate Device: The holder allows for 360-degree rotation. Simply rotate your smartphone to switch between portrait and landscape viewing modes as desired.

Imaxe 5.1: Primeiro plano view of the holder's grip mechanism.

6. Mantemento

To ensure the longevity and optimal performance of your Celly Pro Mount:

• Limpeza: Limpe o soporte e a ventosa cun pano suave eamp pano. Non use produtos químicos agresivos ou produtos de limpeza abrasivos.
• Coidado da ventosa: If the suction cup loses its grip, rinse it with warm water and let it air dry. This can help restore its adhesive properties.
• Almacenamento: When not in use for extended periods, detach the holder and store it in a cool, dry place away from direct sunlight.

7 Solución de problemas

• Holder not sticking to surface:
  • Asegúrate de que a superficie estea limpa, seca e lisa.
  • Press the suction cup firmly before engaging the locking lever.
  • Rinse the suction cup with water and let it air dry to restore stickiness.
• Smartphone not held securely:
  • Ensure your smartphone is within the compatible size range (up to 6.5 inches).
  • Make sure the grips fully close around your device.
• Holder wobbles after installation:
  • Tighten all adjustment knobs securely.
  • Re-attach the suction cup, ensuring a strong vacuum seal.

8. Especificacións

9. Garantía e soporte

Specific warranty and support information for the Celly Pro Mount Screen/Dashboard Holder is not provided in the available product data. Please refer to the product packaging or the manufacturer's official website for detailed warranty terms and customer support contact information.